Jump to content

Where is my pallet fork?

markr

By markr
in Watch Repairs Help & Advice

 Share

Recommended Posts

markr Super WRT Addict

markr

Posted
Posted

I received this fully wound. Balance would move but seamed to be rubbing on the bottom.  When I loosened the bridge screw the balance started to swing.  I removed the balance the movement unwound and I don't see a pallet fork.  Can any one tell me whats going on? I would also like to know who made it and what the movement is? Thanks.

IMG_3388.JPG

IMG_3389.JPG

IMG_3390.JPG

IMG_3391.JPG

IMG_3392.JPG

IMG_3394.JPG

Link to comment
Share on other sites
HSL Distinguished Member

HSL

Posted
Posted

They look fair, who made it one probably can see when you strip it down , a while ago I posted a stripdown of a cylinder movement maby that can help you on the way..

 

  • Like 1
  • Thanks 1
Link to comment
Share on other sites
StuartBaker104 Distinguished Member

StuartBaker104

Posted
Posted

The pivots can be moved up and down in the cylinder to adjust end shake and the correct height of the cylinder in relation to the escape wheel.

You may find a makers mark under the dial. If not you may be able to identify from the keyless works and the movement diameter.

The case is a generic silver import carrying the mark for George Stockwell whose sponsors mark appears on many imported silver cases of this era.

  • Thanks 2
Link to comment
Share on other sites
markr Super WRT Addict

markr

Posted
  • Author
Posted
On 4/1/2020 at 5:35 PM, StuartBaker104 said:

The pivots can be moved up and down in the cylinder to adjust end shake and the correct height of the cylinder in relation to the escape wheel.

You may find a makers mark under the dial. If not you may be able to identify from the keyless works and the movement diameter.

The case is a generic silver import carrying the mark for George Stockwell whose sponsors mark appears on many imported silver cases of this era.

I take it to do this I have to remove the hair spring first. How are the pivots adjusted?  I have a staking set but I have never used it.

Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Michael1962
      I'm going to be setting up a decent little workshop here at home.

      By Michael1962 · Posted

      Well I put the spa on Gumtree (selling service) to try and sell it as it only needs a recirc pump to get it going. However, it weighs circa 250kg, so there's 4 fairly strong guys, and I would have to remove the sliding door in the room completely to be able to get it out, as well as clearing out a multitude of potted plants and the Alfresco outdoor setting to be able to get it out. Then move nearly everything in the back of the garage to be able to push it through to the front of the house. I would also need to hire furniture skates to be able to shift it around as carrying it is out of the question. Then someone would need a trailer to get it to their place as you won't get it on the back of a ute. So, the only answer is, out with the reciprocating saw and cut it all up into manageable pieces. Crying shame as it is in really good nick. I was only asking $1,500 and only got two bites, but it would only take something to go wrong with removing the sliding door etc that everything I make on the sale could go out the door on repairs etc. It would have been nice to be able to turn it into tools etc, but que sera sera. I don't know about the rest of the world, but there just seems to be very little interest from people wanting to buy things secondhand.  
    • mikepilk
      Commando special

      By mikepilk · Posted

      I would like to see the movement. The watch is the movement. Anyone can print a name on a dial and sell it as "the maker".
    • VWatchie
      What are these Seitz B-Jewels?

      By VWatchie · Posted

      Thanks for your answers! There seems to be a contradiction between these two answers, so perhaps I need to clarify. The flat and convex jewels look identical on the side facing away from the pivot shoulder. That is, there is an oil reservoir. I don't know if that changes anything but I thought it was safest to clarify since I didn't include a picture of the jewels from the opposite side.
    • JohnR725
      Incabloc Lyre Spring & Low Earth Orbit

      By JohnR725 · Posted

      unfortunately paying attention to details bumps up the cost. Which is why they shortchange on manufacturing steps if they can.
    • oldhippy
      Introduction

      By oldhippy · Posted

      Thank you for your introduction and welcome to this friendly forum. We all look forward to your contributions and continued involvement.  When it comes to tools buy the best you can afford a good set of watch makers screwdrivers if you look after them will last you a life time. I recommend Dumont tweezers Number 3 and number 5 for fine work, you can build up from there. You will need different strength eye glasses. Some now like to work using a microscope. Pliers the box jointed ones are best they don't go out of line.     
×
×
  • Create New...