Jump to content

Slava 2106 movement HELP

Domovoy

By Domovoy
in Watch Repairs Help & Advice

 Share

Recommended Posts

Domovoy Member

Domovoy

Posted
Posted

Hello Sirs and Madams,

 

I am delighted to start this journey, this is my first time opening a mechanical watch and actually unscrewing a screw =D

This is a Soviet Slava wrist watch that my uncle gifted in the distant past... initially 20 years ago I though I over wound the spring and broke it because the crown almost turned in neutral and would not hold sprint tension...

ISSUE: The crown spins almost freely and the watch will not hold the wind, the crown unwinds back.

Here is what I have done - took the back plate off, observed the mechanism and a youtube video to find a part called the "click" please correct me if I am wrong.  Under this "click" I found a spring in 2 pieces which I assume should be in one piece so that it can twist the click against the large cog to stop it from unwinding. 

PLEASE advise me if I diagnosed the issue correctly and where I can find the proper parts to put back this watch back in operation.IMG_6099.thumb.jpg.5307091549677e6360bc74abc24364c7.jpgIMG_6096.thumb.jpg.d442ed98ec0fb66c48be71b91816b121.jpgIMG_6101.thumb.jpg.fc3bff5d3347da1d7595dba470044f07.jpg

Link to comment
Share on other sites
Marc Distinguished Member

Marc

Posted
Posted

That would certainly cause the symptoms you describe. The click spring should be one piece, yours has broken.

 

It also looks as though the head of the click screw has sheared off too. You will need to remove the shaft of the screw from the plate and replace it for the click to hold in place.

 

  • Like 1
Link to comment
Share on other sites
watchweasol Distinguished Member

watchweasol

Posted
Posted

Hi  Marc has said the click spring is broken and also the screw, if so the screw stub will have to be removed before fitting the new parts, I have attached a Tech Sheet on the slava  although it does not match you movement it will give you an idea of the parts placement and the parts required. hope you find it usefull.     cheers

4517_Slava 2409.pdf

  • Like 1
Link to comment
Share on other sites
Nucejoe Distinguished Member

Nucejoe

Posted
Posted

As Stated click malfunction causes power discharge. Used parts to Russian calibers are usually dime a bushel. You may find part of the same family generation interchange with this. I guess C19 is to been see off first. keep safe.

  • Like 1
Link to comment
Share on other sites
Domovoy Member

Domovoy

Posted
  • Author
Posted
6 hours ago, watchweasol said:

Hi  Marc has said the click spring is broken and also the screw, if so the screw stub will have to be removed before fitting the new parts, I have attached a Tech Sheet on the slava  although it does not match you movement it will give you an idea of the parts placement and the parts required. hope you find it usefull.     cheers

4517_Slava 2409.pdf 866.26 kB · 2 downloads

Thank you so much this is great!

Link to comment
Share on other sites
 Share
Go to topic listing


  • Similar Content

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      Without Our Forum

      By Neverenoughwatches · Posted

      Its 4 o'clock in the morning here in the Uk, i cant sleep, i dont sleep, not much ever really. My brain never shuts off to rest, I'm just a constant thinker, i have to be very tired to be able to sleep,  i guess eventually it will be my undoing and my health will suffer because of it I'm sure. But while I'm here i want to get as much out of life as i can, and give as much as i can, to help,maybe to make a difference to someone's life if that is within my capability,recent events have made that need even more clear to me. I'm not sure where I'm going with this or why i bring it up , or if its relevant to want i want to talk about its just in my head right now. What i do want to talk about is something thats been on my mind for ages. I like to be prepared,  I'm not fond of surprises because surprises take control away and i am a bit of a control freak at times. This forum, Our Forum if i can call it that, is here because of two reasons. The guy that created it and keeps it funded and the people that joined it.  Without either, it would not exist, and lets face it one day it won't ( I'm a realist and i talk about things others dont or who are afraid to in other words folk that dont particularly prepare for the inevitable). How many of us visit here regularly ?  How many among us almost depend on the forum as a way of socialising because they are stuck at home and how many of us has it become part of a daily routine to check in and see if they can offer advice or get help with something they are working on or just to have a chat and engage in some banter. The members here are in the thousands and thousands have disappeared over the years many had just a fleeting visit. But there are a good few of us that know each other quite well and visit regularly. I dont know about you but i wouldnt want to lose that communication with you all, in all honesty it has become an important part of that side of my life and helps to feed my passion for all things watches. Some of you may think differently and thats ok, some of may stop and think # what would i do " Without Our Forum " # 
    • Neverenoughwatches
      Gamblin Gamsol for cleaning?

      By Neverenoughwatches · Posted

      Naptha appears to be a general name and its content can be varied depending upon what it's specific use is. Lighter fluid as an example can be light or heavier also with other ingredients to help it burn. Try sesrching for benzine ( as opposed to benzene which is linked to causing health issues ) . There are other fluids such as ethanol that you could try and also methylated sprirts, mostly ethanol with a small percentage of methanol added. Experiment with any new chemical to see how quickly schellac dissolves in its presence. I have tried a few things but hexane is not one of them, i understand it does evaporate very quickly.  Be sure sure to check out any safety data on chemicals you try. Toxicity of fumes and flash point information, ultrasonic machines can heat up fluids even without a heater function. And of course always ask here for personal opinions when trying a new substance. 
    • GuyMontag
      What tools does ebay have to offer this week.

      By GuyMontag · Posted

      I have that set and really like it. I prefer that crystal holder over the one that came with my Bergeon claw tool and any time I use the claw I use this one instead of the Bergeon one, just an additional bonus with this tool.
    • GuyMontag
      Movement inserted from crytal side

      By GuyMontag · Posted

      Is the Roamer not a split stem? I'm confused on your how your case is put together. If it is a front loader where is it you are putting the case screws? I love me some Roamer, do you have any photos?
    • ManSkirtBrew
      1972 Bulova President "E" Sea King 11ACACB movement

      By ManSkirtBrew · Posted

      Oh nice. I have a similar wedge style stump for my staking tool, so I'll give that a shot. Thanks!
×
×
  • Create New...