Jump to content

Benrus sky chief 72c


Recommended Posts

18 minutes ago, FLwatchguy73 said:

unless the hairspring stud is on an adjustable arm, you'll have to move the hairspring collet to tighten up that beat error. That will likely also improve your amplitude. Excellent progress!:thumbsu:

Thanks. Talking through and getting great advice goes a long way.

Will adjust the hs tomorrow. thanks again!

 

  • Like 1
Link to comment
Share on other sites

Just to clarify for the folks who may not know about amplitude, i.e., do I have enough, too much, etc,  I'm posting a link to an article about balance amplitude. It's pretty informative, here is the key quote from that article in regards to our discussion here:

"An amplitude that’s too low causes problems with timekeeping. Every time the watch changes position (especially a vertical position because of the higher friction of the balance staff), the amplitude drops. If it’s already low, to begin with, the amplitude will drop so low that it’ll affect the rate of the watch.

An amplitude that’s too high can cause knocking or banking. That means that the impulse pin comes around entirely and hits the back of the pallet fork.The amplitude of a modern watch should be between 275 and 315 degrees. In a vintage watch, an amplitude between 250 and 300 degrees is fine."

Very useful information.

Original article....

https://wahawatches.com/watch-talk-whats-the-amplitude-of-a-watch/

 

Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Hi guys I think that old hippy is correct, it opens the gates for china to manufacture aftermarket spare parts. considering that they already do work on behalf of the Swiss I guess this decision gives the a little more legitimacy to tool up and I am sure they will take advantage of the situation either with or without the blessing of the Swiss watch industry  Having read about the protectionist machinations of the Swiss in the history of Europe they were the only ones to get fat at everybody else’s expense. I think the outcome could have been guessed at but ,  fair play to Cousins UK for standing up to them.  Now the question,  will everybody boycott Swiss watches and Swatch, no way they will still fill their coffers.  Me I stick with the Japanese once renowned for cheap shitty watches who came good through industrial effort and don’t for get the Russians that most dismiss as low grade crap. Wouldn’t buy a swatch product ever how about you all.? a
    • Hold the crown when in winding position, move the click away from the crown wheel, and then while holding the crown let it slowly unwind. I recollect that you must remove the automatic device bridge first, but maybe I'm wrong. You can first try without removing the automatic device bridge.
    • nevenbekriev- You nailed it with your description of me and my reaction when the clock started ticking again. I am a newbie.  I love the sound and idea of mechanical clocks but the idea of owning one and trying to keep them running has never appealed to me. My wife bought this one and an antique German wall clock.  When I looked into having someone repair them for me, the universal response was "it's really expensive to work on them, you should just replace the movement". So, I had nothing to lose, I started researching them and opened them up. The wife is happy because she hears the sound of the clocks again. But I have gone down the "accuracy" rabbit hole. In the vertical position, the balance wheel was not floating. It was sitting on the bottom of the frame. I adjusted the lower spring collet and got it floating. It easily passed the 270 degree 3 to 5 minute oscillation test. It took 8 minutes for the wheel to completely stop moving.  I put it the unit back in the movement and checked the safety pin. It does not touch the safety roller anywhere in +/-270 degrees rotation from neutral position. But the amplitude of the rotation with the spring fully wound is weak based on what you are saying. It rotates +/-90 degrees from the neutral position.  No, I did not take the movement completely apart.  That seemed way outside my skill set at the time. There is a reason I became an electrical engineer and not a mechanical engineer. I am much more comfortable with moving electrons than tiny moving metal parts. Will I do it in the long run? Anything can happen. I don't seem to be able to let it go.
    • Isn't that the same guy who told Zelenskyy to escalate the war with Russia/Putin when they already had a peace deal? 2 years later and we have half a million young Ukranian boys dead. He doesn't seem very clever...
×
×
  • Create New...