Jump to content
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing

    No registered users viewing this page.

  • Topics

  • Posts

    • Cool deal. Different seller. Thanks for the intel.
    • Hello my name is Jesse Purviance and I stumbled onto this for him because I use forums all the time to learn things. I love mechanical watchers although the world seems to have forgotten about them for the most part I like automatics I have several old automatics most of them don’t work my three newest ones don’t work and those are my daily drivers. And that’s why I’m here I want to either learn how to repair them myself or find a place that is reasonably price to repair them. I have a seiko a couple old rados and My favorite watches which I care the most about repairing are 2 maratacs and one Hamilton. They are the main reason I am here the maratacs have the same problem the second hand has fallen off of them but one of them I had a local shop repair and since then it won’t stay wound. The Hamilton face has rotated on it is my every day driver my favorite watch I am a farmer and I am hard on watches Because I am left-handed and I wear my watch on my left hand. And working on equipment and things I swing a hammer a lot which seems to be hard on mechanical watches. Anyway good to meet y’all hope to learn a lot here. 
    • I don't recall running across an independent 4 jaw chuck for a watchmaker's lathe yet, though I know they exist. I do use a 4 jaw on my larger (102mm center height) lathe quite often.
    • Impressive!  Saying the following is probably like swearing in church, but I use a simple but steady electrically elevated and lowerable table as my workbench (IKEA I think, yes I'm Swedish). I find it extremely convenient depending on what I'm doing, for example fitting the balance cock (elevated) or when I need a "helicopter" perspective (lowered). It quickly goes up and down with a simple press on a button. I'm so used to it that I don't even think about it. Then again, I don't use eye loupes either but magnifying glasses and a stereo microscope. I would never be accepted among real watchmakers  Anyway, I'm truly impressed!
    • Among others, Cousins UK and Boley.de let you search by case reference for Seiko and other makers. Very good, BTW I have broken my good share of crystals and other assorted parts too. Yes. That allows to delivery fine contours and details with ease of manufacturing. Below 1.2mm they break very easily, you can break a 0.8mm pushing it out by hand. Try to use only crown type dies on the crystal, and a lever type press if possible, as it provides better feedback. 
×
×
  • Create New...