Jump to content

Best Fake Rolex Submariner GMT


Recommended Posts

How did this project eventually go?

The GMT-MASTER does not have an independently adjustable GMT hand. Basically, it points straight-up at midnight and straight down at noon. The bezel is rotated to use that GMT hand to indicate the second time zone. (you can pull the GMT setting gear from an ETA to simulate this lack of function)

The GMT-MASTER II does have an independent GMT hand, which can be set. This allows three time zones to be possibly set.

The Rolex 1655 has the same movement as the GMT-MASTER and the bezel is fixed. Purpose was to indicate day and night while in the darkness of a cave. I worked on a (crappy) replica of a 1655 which had the "quick-set" GMT hand. I think the dial is way to busy and difficult to read as well, but that's another story...

Link to comment
Share on other sites

11 hours ago, Tudor said:

How did this project eventually go?

Sometime one can get an idea about another member horological activity looking at the last logging, in this case it was some three months ago.
While I hope the OP will comes back here, it also happens often that enthusiastic beginners do lose interest pretty quickly.

Link to comment
Share on other sites

Ouch, that's harsh.  It's going well.  Current challenge, frustrated with getting the correct diameter date dial. The date is off center in the window for the dial I have. I'll have to find one that is the right diameter and then shave/thin the one I have and find a way to glue it on perfectly centered.

I have been quiet here because I found a forum where guys focus on making Frankenstein watches "RWI".  Its' been an incredible resource for parts and input on fitting things together. These guys hotrod some crazy shit, it's awesome. There is one guy there "milk" who machines entire cases from scratch.  He makes a dead on early 60's-70's Rolex Master case.

Recent events/challenges

I overcame a challenge I had with my dial being ever so slightly to small for the case I have.  I don't have a lathe but I took an old watch dial I have and put it on a dremel cutting disk chuck and spun it in the dremel.  I then used a razor blade and the edge of a broken cutting wheel as lathe bits to make a custom spacer by cutting the brass disk. Worked great and I didn't add any thickness because it replaces the current dial spacer.Just has a larger OD

The dial I have doesn't have the correct pin placing for the movement I have.  So I just ordered and received a bunch of dial feet from England so I can put new ones in place.

Anyway, that's the update.

Link to comment
Share on other sites

assembled picture shows how spacer makes dial work with the cae I had. Black disk is the spacer I made from a brass dial by turning a dremel into a lathe.  I beat up the case nicely with acid and abrasion and a few hits so it looks 50 years old and saw some action.

Yes yes yes... I'll turn the R into a B so it's says "Bolex" like I promised.  I just wanted a real Role dial so the printing was spot on.

Screen Shot 2020-09-29 at 2.37.48 PM.png

Screen Shot 2020-09-29 at 2.37.59 PM.png

Link to comment
Share on other sites

I presume you know that is the complete wrong case for the watch, right?

Not trying to be "that" guy, but you wanted accurate, and that is a case for a much newer sub or GMT.

What does the bezel for it look like? That case accommodates the ceramic bezel insert.

And it has a 703 (style) crown tube. I think the old GMT had a 5.3mm crown (24-530), and I don't think that'll work in those crown guards. The good news is that you can take a lot of meat off the case to get the vintage look- it's much harder to put it back on.

Link to comment
Share on other sites

Yes it's definitely wrong. I realized after I purchased it.  So I am just having fun challenging myself to make it work.  If I can get the internals to work I will have at it with a metal file and see what I can do as far as shaping.  Outcome doesn't matter it's just working on the skills.  if I totally botch it I'll find the right case.  Maybe get that guy Milk to make me one.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • That would be something! Which brings me back to;  
    • you think you're going to sleep tonight you're not, you're going to ponder the question of what makes you think those of the right parts?  
    • Does anyone knows what size case a need for a dial diameter 20.60mm?
    • Sounds like the story with my Rolex. Poor (expensive) job done by an official Rolex dealer with an "in-house" watchmaker, hence I learned watchrepair and did the servicing myself. Same story as I learned with the Omega 861, again poor job by an "in-house" watchmaker by an official Omega dealer. Once your watch goes through that back-door, you have no idea what is going to happening to it 🫣   Quite nice that they sent back the parts which had been replaced !
    • yes that's definitely not right at all. I have a picture one of my friends has a Omega coaxial there was having issues to lose asking me where he should send it. As that's a specialty watch I suggested the service center. When he got it back he sent me a picture so the replace the dial as you can see the hands the mainspring barrel and I think the price was really quite decent considering all the stuff they can replace. So I do know they do change the barrels but the other person I worked at the service center when I would ask questions and unfortunately I can't remember all the answers. I think a lot of the changing a parts is at the discretion of the watchmaker. Plus I don't know enough about the chronographs and whether that would be considered a vintage watch? I take some of the vintage watches may have been sent directly to Switzerland or another service center. Obviously with a watch like the one down below they probably have a infinite supply of parts is its relatively modern vintage stuff becomes more interesting even the watch companies don't have necessarily infinite supply of parts. But no matter what the watch shouldn't disintegrated six months that's definitely an issue.        
×
×
  • Create New...