Jump to content

Old clocks for Eco warriors?


Tmuir

Recommended Posts

I'm sure where-ever you are the news is filled with climate change news articles and meeting the Paris Agreement targets and similar new articles, and it has been causing a little thought in the back of my brain to keep ticking over.

Should we be mentioning or even promoting the benefits to the climate in buying a good quality serviced vintage or antique clock?

No plastic in the clock, can be serviced and outlast the owners if looked after and probably has a wooden case so is even stores a little carbon, its wind up so no batteries to worry about.

The same can be said for a good quality vintage watch.

I'm only mentioning this half is jest but it could be mentioned as another positive reason to invest in a vintage clock.

I've only ever owned 1 quartz clock and that was something I was given as a wedding present that wasn't on the gift list, I was very pleased when a couple of years later the hook it was on gave way and the clock smashed on the ground which gave me my excuse to tell my wife we needed a good English Fusee wall clock. :D

Link to comment
Share on other sites

Hmmmmm....carbon emissions...have you ever  looked at a graph  of carbon emissions  since 1750?

      Conversely have you ever looked  at a graph  of human  population  since  1750?

      The curves are eerily  similar. Could  it be that  these  emissions  are driving the population  up? More carbon dioxide, more photosynthesis ,More food, More people. Less carbon dioxide,less photosynthesis, Less food, Less people.

        The Earth's  population  was relatively  flat until  we started  burning  coal. Are we polluting  the  Earth, or fertilizing  it?

Link to comment
Share on other sites

23 minutes ago, yankeedog said:

Hmmmmm....carbon emissions...have you ever  looked at a graph  of carbon emissions  since 1750?

      Conversely have you ever looked  at a graph  of human  population  since  1750?

      The curves are eerily  similar. Could  it be that  these  emissions  are driving the population  up? More carbon dioxide, more photosynthesis ,More food, More people. Less carbon dioxide,less photosynthesis, Less food, Less people.

        The Earth's  population  was relatively  flat until  we started  burning  coal. Are we polluting  the  Earth, or fertilizing  it?

Increasing industrialization (resulting in increasing emissions) has allowed much more productive agriculture, which has allowed us to support ever growing populations

Link to comment
Share on other sites

2 hours ago, Tmuir said:

I'm sure where-ever you are the news is filled with climate change news articles and meeting the Paris Agreement targets and similar new articles, and it has been causing a little thought in the back of my brain to keep ticking over.

Should we be mentioning or even promoting the benefits to the climate in buying a good quality serviced vintage or antique clock?

No plastic in the clock, can be serviced and outlast the owners if looked after and probably has a wooden case so is even stores a little carbon, its wind up so no batteries to worry about.

The same can be said for a good quality vintage watch.

I'm only mentioning this half is jest but it could be mentioned as another positive reason to invest in a vintage clock.

I've only ever owned 1 quartz clock and that was something I was given as a wedding present that wasn't on the gift list, I was very pleased when a couple of years later the hook it was on gave way and the clock smashed on the ground which gave me my excuse to tell my wife we needed a good English Fusee wall clock. :D

   the plastic, quartz clocks  burn good too.  vin

Link to comment
Share on other sites

There is a strange paradox with plastic. Yes, it is completely non-biodegradable, but by the same token, it locks up carbon pretty much forever. You don't want to be burning oil, coal or natural gas to make energy, but making plastic is another matter.

The issue with plastics is more to do with the fact that we re-cycle far too little of it, and thus our environment is heavily contaminated with it. 

The same is true of pretty much all of the "ingredients" in our consumer goods. They are typically produced to a price, and engineered to fail. This is of course the madness of infinite growth Laissez-faire Capitalsim. The trouble starts when you try to address this, as the moment you challenge the near religious fervor that surrounds capitalism, people scream nonsense about Communism, and "you must be some kind of communist",  as if it is the only alternative. Leave aside the 'isms' and address environmental matters in a more scientific manner and you will find solutions. 

As to using a mechanical watch or clock. They are actually a brilliant example of good engineering. A well built, well maintained mechanical timepiece will keep going pretty much forever, and use zero additional carbon over its lifetime.

Compare this with an "Apple Watch *"  These products are designed with a fixed lifespan. Generally they are not maintainable in any meaningful sense, and their use of energy (and thus carbon) is many orders of magnitude higher than a comparable mechanical watch.  

Should we therefore be encouraging everyone to wear a mechanical watch?

Of course, after all I have cornered the market in sub £4.04 mechanical timepieces, and my Capitalist senses see a boom in the market if we do. I'll be rich I tell you  $$$ RICH $$$  :D


(*other hideously over hyped and over priced brands are available)

Edited by AndyHull
  • Like 1
Link to comment
Share on other sites

Yes, agreed plastics are a problem, while at the same time being a solutions to other problems.Hence the paradox.But I see the same thing with carbon emissions.We are releasing carbon that has been locked up in the earth for eons .This carbon fuels life.Human life.Of course this is only my theory, which all are welcome to refute.If I am right ,a serious reduction in carbon emissions will result in a reduction in food production.which will result in famine .As for mechanical watches.given proper service they can last almost as long as that milk jug out in the middle of the Atlantic.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • One of the things that I've been bothered with lately is timekeeping? For instance a 90-year-old pocket watch what so to timekeeping was it supposed to keep? They publish railroad timekeeping but I don't know how well normal non-railroad watches were supposed to keep time. The reason why the question comes up for me is I spend a lot of time at work adjusting watches to keep really really good time  because I have to please my boss where as when the watch was made I have to wonder what kind timekeeping would've been acceptable. After all they typically didn't have timing machines 100 years ago and they were timing and six positions certainly not for the non-railroad grade watch. On the other hand I do get paid by the hour so maybe I shouldn't be concerned of how much time I Spend trying to make everything keep chronometer timekeeping almost. Citing a Delta of 40 seconds for a 90-year-old watch is quite outstanding.
    • That's an interesting question which I don't think I've seen explained anywhere. But I think the problem will go away just about instantaneously. In other words the  coating is really thin and it should go away almost immediately. So the problem should resolve itself extremely fast.  
    • I experienced that different types of shellac and their ages are affected differently by IPA. Sometimes the shellac dissolves in a few seconds and sometimes several minutes are required. Nowadays I never let shellac come into contact with IPA. It's a hotly debated topic here on WRT if you search. Like John, I don't think you need to worry about the weight of the shellac, but instead that it might start rubbing against something. When I learned how to adjust pallet stones, I tried documenting my experiences in this thread. Hopefully, it can help you. I personally don't believe in the idea of abrading the epilame before oiling so I don't think you need to think or worry about it. The only time I've heard anyone mention this is Alex on the YouTube channel Watch Repair Tutorials but actually no one else. I'm not saying it's "wrong" just that I don't think it's necessary or adds anything.
    • Typically for introductions all you would have to say is hi I am interested in repairing watches and nobody's going to care about the technical details. Then to certain degree the introductions are not life or death in some cases I guess it depends upon what you did when you came to the discussion group. It's good that you're getting a balance complete for variety of reasons and getting a bonus balance bridge. Because I want you to pay attention to something when you get it as your hairspring still has a problem quite an amusing problem in a way. You notice your hairspring stud is a triangle or shape and it fits into a triangular shaped hole. It also notice how your hairspring has some weird bending right around the stud? So when you get your new balance bridge and the balance complete if you look carefully you'll find that I'm pretty sure the stud will be rotated and that they hairspring will come out the end not the way it's coming here you have managed to twist the stud putting it into the hole and that's why it looks so bad in the previous image. If you are skilled at fixing hairsprings which are not you can fix this. On the other hand are getting replacement so that's good. No it's supposed to be straight up and down. So in addition to twisting the stud you also bent it. On the other hand this is the most common place where people like to bend their hairspring and yes if you had practice with bending hairsprings this is all relatively sort of easy to fix. But I would really suggest practicing on another watch or basically scrap of balance wheels off of eBay that nobody cares about. Because practicing on something you care about really isn't the best. Then the reason I wanted the image below was to see how the balance jewel assembly is attached to the bridge. Sometimes it needed jeweling tool to push it out but in this particular case all you have to do is remove the U-shaped clip in the whole thing falls apart. But if you're lucky here replacement balance bridge will solve the problem.
    • I still need to see the complete movement as there are many types of Elgin movements. The part that you are holding is called a snail. 
×
×
  • Create New...