Jump to content

Winding Stem Holding Screw Has A Stripped Thread


WillFly

Recommended Posts

I've acquired an old and very worn Tiresa head (Swiss, 17 jewels) to play around with - broken mainspring, etc. - and I'm having some trouble in undoing the screw that holds the winding stem. It turns freely - but doesn't actually unscrew - so the thread is probably mangled - and there isn't enough purchase for tweezers to grip it. Minor, but damned irritating! Unfortunately, it's not so loose that it will just drop out. Any ideas here?

 

post-64-0-83693500-1421659372_thumb.jpg

Link to comment
Share on other sites

Will you will have to use rodico perhaps or a touch of super glue on the end of a pokie thing & hopefully it will lift it out. The only other thing I can think of is if there is no power in the watch is to remove the the bridge wheels etc and hopfully you can access the stem from this side & wiggle it out.

Edited by clockboy
Link to comment
Share on other sites

It could have a shoulder on it that holds it captive until you split the movement. I've come across that sort of thing before.

It's just a thought Will.

I've also seen them where you unscrew a couple of turns and then press the end of the screw to release the stem.

Edited by Geo
Link to comment
Share on other sites

Will had another thought!!!!

The screw has most likely detached itself from the retaining yoke that stps the stem coming out. What might work is to remove the movement retaining ring & have the watch dial up & wiggle it & at the same time pull the stem. Be careful as the stem can brake

Link to comment
Share on other sites

No, alas, I've had to put it on one side, just for the moment, as I've been chauffeuring various family members hither and thither and doing other domesticities. Grandkids school runs, mother-in-law (who's 88 and frail) to hospital for a test this afternoon, shopping tomorrow morning, hospital myself on Friday morning (suspect mole on back). All sorts of fun and games, and I like to book myself some tranquil play space!

Link to comment
Share on other sites

No, alas, I've had to put it on one side, just for the moment, as I've been chauffeuring various family members hither and thither and doing other domesticities. Grandkids school runs, mother-in-law (who's 88 and frail) to hospital for a test this afternoon, shopping tomorrow morning, hospital myself on Friday morning (suspect mole on back). All sorts of fun and games, and I like to book myself some tranquil play space!

Me & you seem to have the same hectic life Will. Me clearing a loft with 30years of crap in it. Grandson for the next two days etc etc. PS you might appreciate this in the loft found a box of my old LP,s + my faithful Thorens turntable, sadly with the counter balance weight is missing. All this and them watches still need looking at!!!

Edited by clockboy
Link to comment
Share on other sites

I'm hoping to get a "window of opportunity" to sit down with it this weekend. The grandkids and the local health centre have been taking up the week, and I've got to sort out 3,000 pieces of sheet music into a filing cabinet I collected from an eBay seller on Monday afternoon, and I can't get the cabinet into the garage until I've shifted amps and crates out of the way, and then I've got to get my son over to give me a hand with shifting the cabinet, and then... and then...

 

So I'm a bit busy at the moment! :D

Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I have it, so until we get a lunch one day , nearly everyday is with my mum at the moment.
    • In the meantime whilst awaiting a better plan, please drop me a quick hello on my email. 
    • I looked at it like this, I've built a lot of stuff in my time, building structures and furniture,those are my creations and they will still be here way way after I'm gone. Traditional watchmakers felt the need to pass their knowledge on, ideas that they created . I assume with them as it is with me, leaving their mark on the earth, a way of being remembered. This creation of Mark's has brought thousands of people together to pass their knowledge around,  ideas that will continue to be used for lifetimes. Ideas that should continue to be procured. If for whatever reason the forum ceased to exist, not quite like Ranfft's, that didn't disappear but much less usable. Then that is sad, such a massive loss of communication between good people and a wealth of knowledge lost. There should be something in place for when that happens which could be next week, next year or in 10 years. Might not be a topical subject for a lot of folk or boardering on controversy, i did say i talk about stuff other people dont. But if you dont talk about it and something happens then you've lost it and you ain't gonna fix it .
    • I've remained silent on this thread, and at the risk of upsetting everyone, the thing that worries me the most the the apparent absence of Mark. The moderators do a great job and the members also pitch in, and the site seems to run itself, but it is a concern for the future of this forum when the owner is absent for all intents and purposes. Like many of the comments above I would hate to log in one day and things be closed down as I rely on this site for ideas and knowledge and also cheer me up. maybe the Moderators could reach out to him, assuming he does not read this thread, and express our concerns and let us know the plans going forward? some kind of WRT ark
    • That was the exact reason for me starting this thread watchie. Still we haven't worked out how the regulars are going to hook up if it goes tits up. I honestly think something should be arranged to stay in contact, we all help each other so much. 
×
×
  • Create New...