Jump to content

Hello to everyone


VFA

Recommended Posts

Hello, there. I have been into watches since childhood when my grandfather gave me his Soviet "Победа" watch (I grew up in Soviet Union). I was probably 8 or 9 years old. Watches were extremely cool devices then to everyone. This was in the 70's. I've loved and owned many watches since. I now live in USA and am enjoying a small collection of inexpensive, but dear to me Seiko watches. I have always been a Seiko fan as they seem to be some of the best affordable watches out there. I have also taken apart, but not put back together many watches. As YouTube became popular I have discovered Mark's watch repair channel and was absolutely blown away by this amazing watch master. I found myself watching his videos as meditation. Absolutely amazing!

As I do not have a lot of money to spend on watches I tend to try and find good deals on the used market and I really enjoy even a simple mechanical watch with no crazy expensive stuff. As such I have purchased a brand new Seiko 5 Automatic Field watch a few years ago. It was really inexpensive, had an exhibition back and a very dear to me clear light dial with contrasting hands. It works very well to this day and is still one of my favorite watches. I have since replaced its flat mineral crystal with a domed sapphire one, which really improved the watch a lot. I have also successfully regulated it to run at only a few seconds fast a day. But to feed my addiction I discovered that Seiko kinetic watches are sold very cheaply because of the fact that most of them need a new capacitor. I myself had owned a Kinetic at one time. It too was very inexpensive and worked well until the capacitor gave out. I learned to replace it and the watch worked well after that save to the fact that the case was very cheap and got really ugly. So I have found a used Kinetic market to be very satisfying. I have acquired a number of these Seiko Kinetics and replaced capacitors and/or crystals in many of them. They are amazing timepieces. They run absolutely flawlessly and accurately and have a huge power reserve with the new updated capacitors (about 6 months max reserve). My latest acquisition was a beautiful almost perfect condition Seiko AGS Spirit Titanium. This is the same as Kinetic, but an older, perhaps JDM (Japanese Domestic Market) name for it. I traced this one to February 1995 production. The watch looked almost perfect. But it needed a capacitor, of course. The matter was complicated by the fact that the case on this one is a one piece affair. The way to get the movement out is through the front. The crystal bezel pops off its friction gasket fit. I had successfully replaced the capacitor in this watch, but the gasket is a one time use deal. So now I am looking high and low for the gasket. I searched and could not find anything. So I started looking for fora and found this! I had not idea Mark had a forum. I was going to try and contact him via YouTube, but did not want to bother him. Now that I found this place I am really hoping to get some help with sourcing this gasket shart term. Long term I am just beside myself at finding a place where Mark is present and learning.

IMG_0339.jpg

IMG_0338.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I think if you want to play Billy big b.ollocks then you have to have something up your sleeve, anyone that knows how to fight, plays dirty. Lets face it a lot of folk that voted for Brexit just rolled uk their sleeves to say up yours EU hoping for good changes. We have idiots for leaders and probably none of them clever enough to clean the shitty stick they were given. I didnt vote, what will be will be.
    • I voted leave too, my reasoning was the the EU is undemocratic, no elected officials. I don't regret it but I  am sad that both sides acted like petulant toddlers.  Shameful.  I'm not on other forums but if I was and left this site, would you shun me? Of course not, we aren't petulant toddlers.  
    • This is a type of tool that may be suitable to remove the bezel - though note that I'm pretty sure the watch should be face down - not face up, as in some of the photos of these tools on amazon & ebay! If you try one one of those, put the movement screws back in first to avoid accidents. https://www.amazon.co.uk/Removal-Professional-Remover-Watchmaker-Diameter/dp/B09XCH4QVN?source=ps-sl-shoppingads-lpcontext&ref_=fplfs&smid=A296NCMMFVXSDN&th=1  
    • Hi, I’m constantly asking my wife to help me with removing the stem in order to complete casing. To expand, this is not a challenge for me when the setting lever is secured by a screw (older calibers). However when the setting lever is attached to a spring loaded setting lever axel, like on more modern calibers, I simply don’t see how to apply enough pressure on the button to get the stem out short of putting the movement face down with the dial and hands attached, which I’m loath to do in order to avoid damaging the dial/hands? what technique should I be using? thanks  
    • Many thanks for your advice (being borne in mind at present) & offer Dell. When I was given the clock the plastic anchor was loose on the arbour (it had split at the 'hole') &, after repairing this, I have been trying to determine whether the spindle (pin) should be perpendicular when the pallet is sitting on a flat surface; or whether, when installed, its L-R extremes (or alternatively its tick & tock points) should lie at equal angles from the vertical when moved with spring absent. I can get the clock to run but in every such configuration the top block has to be turned anti-clockwise (from above) by quite a bit in order to be 'in beat' & it always runs fast (despite the pendulum being set to as slow as possible). This makes me wonder if there is any particular feature of/fault in a torsion spring clock which determines which turn direction (if any) is necessary to get it 'in beat'; & whether there would be a different set of settings that would get it running nearer to time at somewhere around the mid timing/inertia position which would then allow tweaking of the fast/slow setting.
×
×
  • Create New...