Jump to content

Learning

adamb11

By adamb11
in Introduce Yourself Here

 Share

Recommended Posts

adamb11 Member

adamb11

Posted
Posted

Hi,

 I a mechanical engineer that specializes in electro mechanical product design.  I own my own engineering consulting company.  I do design smaller intricate devices for customers like laser systems with built in cameras to break up kidney stones (I won't mention where we stick this stuff but we make it as small as possible for minimum discomfort).  So I do know intricate engineering.  But I am aware that this does not mean I necessarily have the finesse or experience to handle small things like watch parts without practice.  I have pulled apart some simple movements to learn the basics and have acquired the basic tools to not do damage while working on the watches, good screwdrivers etc.  Because of my engineering I have a good workshop in my house.  I have a microscope that I can take pictures and make videos with.  This has been helpful because the videos played backwards are a nice assembly guide.  

I have always loved watches and especially mechanical watches, I usually wear one. I have restored clocks for vintage cars, but that is on a kindergarden level compared to a wristwatch. Looking forward to learning more an more about watch restoration.

Regards,

Adam

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • rossjackson01
      Without Our Forum

      By rossjackson01 · Posted

      Never and others. Yes like you I do spend a fair amount of time reading the contents of this forum. I find it better that any other. clear, lucid, no Prima Donas, and most of all an easy access without adverts. All thanks to Mark. God bless you mate. You give so much to many of us. What if? No Mark? Hypothetically. A forum. I did run a forum for a few years. Really enjoyed it, but became so engrossed that it did affect my health. I gave to to others to run. Not been back. It was very successful and rivalled a number of large paying sites. No adverts, no others but me. I did ask and listen to members comments and it worked well.    Costs Having a domain name, £10 annually.  Register the site with a forum company, free. Build the site using the forum company guide lines, free. It looked and ran almost the same a Mark's. All the same facilities. The cost was only £5 per month, but counted visits (views). If I recall, it was that price for 5,000 views. Each extra 5,000 views increased the price by £2 per month. Success was my own personal undoing. From £5 per month initially, it rose to £60 a month and looked like increasing. This was 10 years ago. I could not afford that, and asked it anyone would like to take over and someone did. I would assume that this is the price that Mark is funding for us all. His return is our continued comments on the internet about his course, and the fact that many of the big names on YouTube mention him as their Tutor. Those of us who have done, and are still using, his course, benefit. In comparison to other courses, I can't believe how cheap it is, and the value is exceptional. It is the structure that gives the value. Long may Mark reign. Ross  
    • Dell
      Broken lug

      By Dell · Posted

      Get someone local to tig it ,very easy fix and should only take a few minutes so probably wouldn’t cost much ,or failing that get it very clean and silver solder it. Dell
    • Zedster
      Movement inserted from crytal side

      By Zedster · Posted

      Hi, The winding pin is not split, well that's how it was when I obtained the watch. The movement is front-loaded and here's a picture of where the case screws are fitted. The face picture is before I dismantled it.
    • Neverenoughwatches
      Without Our Forum

      By Neverenoughwatches · Posted

      I dont think mine is. Its an idea to have them all in one place if possible, then a quick screenshot will have them saved. Unless anyone has any other ideas of how to reconnect 
    • RichardHarris123
      Without Our Forum

      By RichardHarris123 · Posted

      My email address is in my profile, feel free all to drop me a quick hello. 
×
×
  • Create New...