Jump to content

Seiko Spring drive explained


Recommended Posts

1 hour ago, clockboy said:

This Vid explains how the Seiko spring drive works. Seiko IMO are now the leading innovators of the industry. This is a truly new concept giving a mechanical watch the accuracy of quartz.

I like Seiko a lot. But it must be noted that Spring Drive is partly quartz, because that is the timing element used to precisely brake a wheel. And it's not even that new, having started sales in 1999.

To be fair, with just that to boast in 3 or 4 (if you count developing time) decades, Seiko is not a major of a technology innovator when it comes to mechanical watches. The title should perhaps go to Omega with Coaxial escapemnt, Rolex and others with silicon hsirspings, and the Swiss and German industry at large, the only ones that have introduce many totally new movements. Not to mention their haute horlogerie which never cease to amaze with incredible realizations. 

Link to comment
Share on other sites

21 minutes ago, VWatchie said:

I wonder, did anyone ever service one of these Spring Drive watches?

I don't think that any member here did. Seiko mandates these to be sent to Japan for repair or service. Because of that you can find tons of marketing material, influencer and owner raving but very little in-depth technical covering. The Horological Times issue attached below has some. And I remember a photo service by an American watch academy, but can't find it anymore. 

2006-01-web.pdf

  • Thanks 1
Link to comment
Share on other sites

27 minutes ago, VWatchie said:

Very informative! I thought these were quartz driven but are in fact a main spring driven but quartz regulated. I wonder, did anyone ever service one of these Spring Drive watches? I wouldn't mind wearing that GS! :biggrin:

I wouldn't mind pulling one to pieces :chainsaw:

  • Haha 1
Link to comment
Share on other sites

2 minutes ago, Graziano said:

I wouldn't mind pulling one to pieces 

Neither would I, if I was in a Seiko workshop and guaranteed immunity.
Not terribly expensive starting €2,000 for an used one, still no good reason for an amateur to take chances on it.

Link to comment
Share on other sites

35 minutes ago, jdm said:

Neither would I, if I was in a Seiko workshop and guaranteed immunity.
Not terribly expensive starting €2,000 for an used one, still no good reason for an amateur to take chances on it.

u are right jdm but wouldn't it be nice to have the ability and confidence :cigar:

Link to comment
Share on other sites

4 hours ago, jdm said:

I like Seiko a lot. But it must be noted that Spring Drive is partly quartz, because that is the timing element used to precisely brake a wheel. And it's not even that new, having started sales in 1999.

To be fair, with just that to boast in 3 or 4 (if you count developing time) decades, Seiko is not a major of a technology innovator when it comes to mechanical watches. The title should perhaps go to Omega with Coaxial escapemnt, Rolex and others with silicon hsirspings, and the Swiss and German industry at large, the only ones that have introduce many totally new movements. Not to mention their haute horlogerie which never cease to amaze with incredible realizations. 

    as i recall.   the early "de Carle" book says the concept of a slipping main spring was patended by Movato.  vin

  • Confused 1
Link to comment
Share on other sites

3 hours ago, jdm said:

I don't think that any member here did. Seiko mandates these to be sent to Japan for repair or service. Because of that you can find tons of marketing material, influencer and owner raving but very little in-depth technical covering. The Horological Times issue attached below has some. And I remember a photo service by an American watch academy, but can't find it anymore. 

2006-01-web.pdf 6.11 MB · 3 downloads

    VERY good refural !

Link to comment
Share on other sites

I got a spring drive and expect more power reserve for the money or of the technology. The speed power reserve builds up in it was interesting back when I bought the piece and have ever since wondered about its precision after repair.

Has anybody seen a serviced one?

Link to comment
Share on other sites

This has gone off piste a bit. The reason this is an innovative concept is the achilles heal with the mechanical watch has always been the escape. The most errors, faults and time discrepancies are the escape and this eliminates these errors. The purists will reject this and claim it only quartz but it is a mechanical watch but quartz driven. For now with a $47,000 price tag many will not purchase but as time progresses the costs will drop and it will become a real alternative for consideration. 

Link to comment
Share on other sites

1 minute ago, Nucejoe said:

I got a spring drive and expect more power reserve for the money or of the technology. The speed power reserve builds up in it was interesting back when I bought the piece and have ever since wondered about its precision after repair.

Please explain yourself better? What is the current power reserve, and why you do worry about precision after repair, which can only be done throught officical channels at Seiko Japan for a an high price certainly?

1 minute ago, Nucejoe said:

Has anybody seen a serviced one?

You have been here a long time and I'm sure you know well the ins and outs of this forum. We are lucky to have very knowledgeable people about Swiss and non-Swiss piece of moderate to medium value, plus a Master Watchmaker. But when it's about an elitist's Japan Domestic Market piece , you would struggle finding a repair expert worldwide, outside of Seiko.

By the way I'm myself amazed about the lack of knowledge about Japanese/Seiko top end offering. As in confusing Spring Drive with Kinetic / AGS (Automatic Generatic System), etc. Grand Seiko / Spring Drive has been a pinnacle produce very well know to demanding watch collector since at least a decade. 

Link to comment
Share on other sites

11 minutes ago, clockboy said:

This has gone off piste a bit. The reason this is an innovative concept is the achilles heal with the mechanical watch has always been the escape. The most errors, faults and time discrepancies are the escape and this eliminates these errors. The purists will reject this and claim it only quartz but it is a mechanical watch but quartz driven. For now with a $47,000 price tag many will not purchase but as time progresses the costs will drop and it will become a real alternative for consideration. 

Few purists except perhaps the most hardheaded ones reject the value of Spring Drive / Grand Seiko watches, just have a look at the "inventory signatures" of prominent collectors on popular sites like WatchUSeek.
Luckily for prospective buyers as I mentioned above the the entry price to the club is Euro 2,500 for 2nd wrist nice piece and not exceedingly more for a brand new one:

https://www.seiyajapan.com/collections/grand-seiko/products/grand-seiko-spring-drive-gmt-sbge213

That is just to show a listed price of JPY 669,600, (about EUR 5,800), before considering discounts and manufacturer  restrictions.

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Ok thanks Ross, I will give that a try!😁
    • Welcome my friend. 
    • Been there. Worn that Tshirt.  'ping'. Hands and knees. Nothing. Nada. 20 minutes? Ha! I found it 7 month later. How? Well, after advice from a member, I invested in a £4 UV light torch.  Hands and knees looking for a 'ping' from a Sekonda, found them both within 30 seconds. UV makes the jewel shine. easy peasy. Could have taken longer. Just lucky on the location of the search. Hope this helps.
    • Thanks Dell. I thought about silver soldering. Have never done it but would like to give it a go. Do you think to put flux on the butted joint then run the solder in or to maybe brace it with a piece of scrap spring steel?
    • Never and others. Yes, like you I do spend a fair amount of time reading the contents of this forum. I find it better that any other. Clear, lucid, no Prima Donas, and most of all an easy access without adverts. All thanks to Mark. God bless you mate. You give so much to many of us. What if? No Mark? Hypothetically. A forum. I did run a forum for a few years. Really enjoyed it, but became so engrossed that it did affect my health. I gave to to others to run. Not been back. It was very successful and rivalled a number of large paying sites. No adverts, no others but me. I did ask and listen to members comments and it worked well.    Costs Having a domain name, £10 annually.  Register the site with a forum company, free. Build the site using the forum company guide lines, free. It looked and ran almost the same a Mark's. All the same facilities. The cost was only £5 per month, but counted visits (views). If I recall, it was that price for 5,000 views. Each extra 5,000 views increased the price by £2 per month. Success was my own personal undoing. From £5 per month initially, it rose to £60 a month and looked like increasing. This was 10 years ago. I could not afford that, and asked it anyone would like to take over and someone did. I would assume that this is the price that Mark is funding for us all. His return is our continued comments on the internet about his course, and the fact that many of the big names on YouTube mention him as their Tutor. Those of us who have done, and are still using, his course, benefit. In comparison to other courses, I can't believe how cheap it is, and the value is exceptional. It is the structure that gives the value. Long may Mark reign. Ross  
×
×
  • Create New...