Jump to content

1971 Rolex on Antiques Roadshow


Recommended Posts

I don't find that so strange. In the past Rolex had prices aligned with other makers, $345 in 1974 are about $1,780 of today, which is like 10 times more what a normal person would pay for a watch or smartphone, and would buy you a nice Swiss chronograph. As a young man he took an uncommon decision of spending a month salary or more for it,  having done the same at about the same age I understand that perfectly. 

Then the watch has been valued so high first  because of the general crazyness about the  brand, and then because drooling collectors have decided that just because few dials have been printed like that, they must have higher intrinsic value.

I am happy for the owner and I whish him the best health and wealth, but I am afraid that if he decides to sell it he could find that reality of doing that is a quite different from the parking lot show put together for television. 

Link to comment
Share on other sites

1 hour ago, oldhippy said:

Seriously though, who the heck sits on a Rolex watch for nearly 50 years and never wears it.

Someone with plenty of money.:D

Certainly not the case here and it turned to be a very wise decision. Even by the rich collectors of today its commonly done, they call them drawers queens. 

Edited by jdm
Link to comment
Share on other sites

  • 2 weeks later...
On ‎1‎/‎31‎/‎2020 at 1:42 AM, jdm said:

Certainly not the case here and it turned to be a very wise decision. Even by the rich collectors of today its commonly done, they call them drawers queens. 

I always found that part of watch collecting a bit depressing.  In the collector's eye the best watch is the unloved one- bought and never worn.  (sigh)

I had to tune in for the episode though.  Gorgeous watch (although I like the model 6239 better).  It wouldn't surprise me if it goes for over a million USD at auction.  It was a very sound investment.

Link to comment
Share on other sites

People are doubting the authenticity of the watch, specifically whether it is truly "unworn". You can purchase blank genuine documents online all day long and the case back sticker does indeed show signs of wear and the dial shows what appears to be dust particles on close inspection which means it may have also been serviced. Time will tell I suppose.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Welcome to the group Stirky. You can search for just about every subject in the craft here. Don't be afraid to ask if you can't find the answer that may have already been covered ( some ad nauseum LOL ). You don't have to buy Bergeon to get good quality. There are many decent mid-range tools available that will last you a lifetime. Cousins would be a good place to start . Cheers from across the pond ! Randy
    • I picked up a similar amount of these jewels some years ago in a watch and clock fair. Every now and then they come in handy. This week I've got a rubbed in bombe jewel in the balance cock that is cracked and needs replacing. Very handy to have a vintage assortment of these type of jewels!
    • Great diagram with the teeth and pinion count. Simple way to reduce the speed of the hour wheel by the 12:1 minute wheel. Genius and yet so simple. Always good to reinforce the principal by what you have done in your drawing. Keep doing that. I had a drawing on my wall for years showing me this which is very similar to the drawing you have done. Here's a formula to work out the beats per hour of a watch movement. The movement's BPH is dictated by the wheel teeth and pinion count and the hairspring being vibrated to the correct BPH by finding the pinning up point on the hairspring using a vibrating tool.  The reason in the formula there is X2 on the top line is because there are two pallet stones.
    • So I just wanted to say "thank you" again.  The angle is the key bit it seems and yes, it did basically just fall, or float, back into position when I got it lined up just right. I had meant to add that now that I see how it goes in, I totally see how it came out in the first place, and that whomever cloned the original movement didn't pay much attention to the fine details around the setting or how it interfaces with the balance cock or the "rings" on the regulator and/or stud carrier arms.
×
×
  • Create New...