Jump to content

Abyss 2


Graziano

Recommended Posts

The Abyss 2 is 43mm round and 19mm thick with a 7mm Sapphire crystal, a huge lump of bronze. The photos turned out a little darker but there is mottling on the case and the angled edges are slightly polished and with the crystal deflection I must say it looks like a 3000m diver which it is. Don't you reckon it looks tough? Come on you guys and gals

Link to comment
Share on other sites

@oldhippy, it's called a patina.  It's very desirable by some and is very desirable on some watches,  especially bronze case watches.  The bronze metal naturally develops an oxidation layer over time.  But there are methods to accelerate this effect,  acids,  salts etc. Ive seen bronze watches aged to look as if the watch had been sitting at the bottom of the ocean for a hundred years. There is also a niche among the vintage watch community where only partial restorations are done to watches leaving them looking battered and used.  Makes it look as if there is a long history and am interesting story to go along with the watch.  Similarly,  in furniture it's often called distressing and in automobiles it's called Rat Rods. Handsome watch @Graziano

Link to comment
Share on other sites

I can understand why people may want to do this, but its not my thing.

One of my previous hobbies used to be restoring old toy live steam engines.

If they were completely trashed I would restore them back to better than new, but my preference was always to preserve its 'patina' if possible acquired other the 60 to 100 years of its life.

On the other hand with a watch I think I like them looking as new as possible, but I never touch the dials and otehr than a gentle wiping of dirt and dust leave the dials to show their age.

Add or removing patina is always a hotly debated topic, although I never considered it before on watches except for very rare and historic items.

Link to comment
Share on other sites

A degree of patina is to be expected on vintage watches, they are old after all and the patina reflects the life that they have so far had.

I can understand that there is a fashion for an apparent "distressed" or "patinated" finish on new watches (although it's not really my thing) to create the impression that the watch has had an adventurous life even though it's factory fresh; the same fashion has reared it's ugly head (my opinion only) in the world of electric guitars.

Where I have a problem is when you get an artificially aged watch case, but the dial, hands, and any printing or paint filling on the bezel is absolutely pristine. It's a mis-match that highlights the fact that the patina isn't due to a natural ageing process.

The Helson posted above does at least have bezel markings that blend with the rest of the case, which helps, otherwise it's a bit like putting brand new hands on a watch with a time aged dial, they stick out like a sore thumb, even if the lume is a good match.

I guess it's not my cup of tea. That being said, I do like bronze watches that have patinated naturally and where the rest of the watch shows a similar level of ageing.

Edited by Marc
typos
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I picked up a similar amount of these jewels some years ago in a watch and clock fair. Every now and then they come in handy. This week I've got a rubbed in bombe jewel in the balance cock that is cracked and needs replacing. Very handy to have a vintage assortment of these type of jewels!
    • Great diagram with the teeth and pinion count. Simple way to reduce the speed of the hour wheel by the 12:1 minute wheel. Genius and yet so simple. Always good to reinforce the principal by what you have done in your drawing. Keep doing that. I had a drawing on my wall for years showing me this which is very similar to the drawing you have done. Here's a formula to work out the beats per hour of a watch movement. The movement's BPH is dictated by the wheel teeth and pinion count and the hairspring being vibrated to the correct BPH by finding the pinning up point on the hairspring using a vibrating tool.  The reason in the formula there is X2 on the top line is because there are two pallet stones.
    • So I just wanted to say "thank you" again.  The angle is the key bit it seems and yes, it did basically just fall, or float, back into position when I got it lined up just right. I had meant to add that now that I see how it goes in, I totally see how it came out in the first place, and that whomever cloned the original movement didn't pay much attention to the fine details around the setting or how it interfaces with the balance cock or the "rings" on the regulator and/or stud carrier arms.
    • Well I’ve never seen the make before and cannot find any info, I haven’t got it just yet it’s been left to me among a 1970’s sea master and a mid size yeoman. But if anyone has any information on this one please feel free to enlighten me, many thanks 
×
×
  • Create New...