Jump to content

Identification.


fjseal

Recommended Posts

Is it normal for a clock movement to have no visible form of identification, if so, could it be hidden out of sight somewhere. How can one make a start on finding, for example, a new mainspring or the age of the movement . This is the clock I asked  about earlier regarding mainspring condition. Watchweasol thought it could be of European, possibly German origin.

Link to comment
Share on other sites

Definitely one to call in the clock big gun contributors to ...

...however whilst eating my lunchtime sandwich I thought I'd spend a few minutes looking around and came across this which certainly looks like your case and indicates a thermometer would have once been present: https://www.antiquesnavigator.com/d-1201283/antique-victorian-deskmantel-clock-barometer-thermometer-good-working-order.html. Of course, like yours, no clue on a maker but then I thought I'd take the barometer face design as an angle because that lettering and spacing is pretty distinctive and came across: https://www.tooveys.com/lots/266080/a-late-victorian-aneroid-barometer-with-carved-oak-circular-surround/ . Your pic is a bit fuzzy but the similarity is obviously there with this one ... and interestingly it has "Guaranteed English Make" on it. Now of course whoever put your mantel barometer-clock together originally might have mixed English barometer with European/German clock but if in the unlikely event our forum's big guns are stumped then a search along the lines of victorian english mantel clock movement might be worth a go.

  • Thanks 1
Link to comment
Share on other sites

That is German and it’s an 8 day duration. The balance staffs on these clocks normally wear and the tips become like a blunt pencil, so they need to be pointed, so you need a lathe to do this and re-point using a stone, I used a small arcanses stone to do this with oil. Also check the cups as these can also wear, if so they need to be smoothed out by means of a countersink.  

  • Like 1
  • Thanks 1
Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Dell fancy a challenge🤣   https://www.ebay.co.uk/itm/285785684626?itmmeta=01HT29WVJY21Q94C73GYHGBTFX&hash=item428a277a92:g:15YAAOSwNRVmBAUz&itmprp=enc%3AAQAJAAAA0DIe4QLQBW66rSyIMiyBuk8GY%2B86pQ%2BQnxGbcNq7egAGe5DIs9YMmiWJIbZtMSxwNJIiJxuojbq523IeUSBQ6pJEIQ0tfz2ChrBR03BksmKINyklg1IK4GAfAcYY9Hta9wVeSZSZN7ZCNAfZTgKs9c4%2BUIUZ3Qjc3QjUXDn2uPRo1FiYOEewMG5A26EXb%2BclBgrqtbOmM6P3bea%2F8ZImOAXNI1HtbmtMk84pIGoM6ISwaM1PKFuADtTFMccS5e3ZjndCbXYXHrW3CecsV0edw3M%3D|tkp%3ABk9SR8q588nQYw Darwin’s theory of evolution has not been proven to be absolutely.  😀 
    • A already know the size movement I have the problem is the dial a had purchased has a dimension 20.6mm wide a want to find a watch case that going to fit the dial perfectly 
    • Hi.  I would like to take issue here regarding battery driven , watches, clocks,etc. I will and do repair these clocks in fact I have sever al in my collection as well as the regular mechanical ones. I have one on my mantle piece over 60 years old tha belonged to my wife’s Aunt,  long gone Iam afraid and it has been cleaned etc and never missed a beat and is accurate. Every one has their preduices as regards Electrical /electronic Horology but I regard it as part of the progress time line of the art of Horology and to be treated as such. Like Darwin’s theory of evolution it evolved.  Two cavemen knocking rocks together and a shard broke off , looking at it he worked out if it was stuck on the end of a stick he would have a spear. Likewise his pal seeing what he was up to picked up a piece  and did the same, now that’s evolution. Some clockmaker decided to build a clock that ran with a battery and no spring to wind up and break, progress and both the mechanical and battery driven clocks evolved, the battery ones got better to the point that if it broke you changed the complete unit. Likewise watches did the same but both can be repaired by people who approach Horology with an open mind without preduice.  We all have our likes and dislikes bu I for one would never dismiss any technology because I don’t like it.   The mobile phone is a good example of modern technology at work as is the automotive industry. There buttons and switches in my car I don’t use because to me they are not nesessary but I still drive the car.
    • I haven't gone through all the reading of what it might be or not. The first thing I would do if nothing obvious stands out is replace the mainspring, you have to start at the source of the power. Nine times out of ten that is the problem.  
    • Haha. You're just in a wicked mood today John 😅
×
×
  • Create New...