Haller pu81 electromagnetic pulse skeleton clock

[Squiffything]

I have one of these to try and fix. It has a electronic movement that powers a magnet that drives the pendulum that then runs the clock movement. Unfortunately this part has been damaged. Has anybody worked on one of these or know whereabouts I might find a replacement drive unit?

[watchweasol]

Hi Sqiffy  Have you any pictures   I think what you have got is an ATO clock that powers a coil that swings l/r on an arc, can you be more specific as regards damage. The ususall culprit for them not working was the transistor A (pnp) if I remember correctly. Ithink I have some info on them from the last one i did. 

[watchweasol]

Hi  squiffy   attached two pics is it like these.

[oldhippy]

Sorry not the sort of thing I repaired. 

[Squiffything]

Good morning guys and thanks for the replies. WW it’s not the type I have mine is powered by a magnet under the pendulum. I’ve added pics showing the clock and the movement including the broken area. 

[AndyHull]

You can probably replace the corroded terminal if you are handy with a soldering iron.

https://www.ebay.co.uk/sch/i.html?_from=R40&_sacat=0&_nkw=AAA+battery+terminals&_sop=15

[watchweasol]

Hi Squiffy  Common problem with battery driven units , the battery leaks and the salts  corrode the terminals.  As Andy said the terminal can be replaced with a bit of careful soldering. I have even repaired some quartz units by making new terminals from brass sheet, but better still the link supplied by Andy for the bay contains plenty of terminals, mustbe some on there  Cheers.

[Squiffything]

Thanks guys I think I will have to take the box off and examine it to see where the connection is then get the iron out.

[watchweasol]

Hi  Squiffy Interesting if you could supply photos of the control unit opened up.

[Squiffything]

55 minutes ago, watchweasol said:

Hi  Squiffy Interesting if you could supply photos of the control unit opened up.

I will do when I get to it. It’ll mean taking it off and dismantling it first and I’m working during the day at my new job. I’m now an apprentice saddler! At 54! Working in a proper old school type workshop 

[watchweasol]

Hi Squiffy   well done, never too old to learn. Its finding some one who will take you on these days.

Definitly sounds like the unit is not working as it should.

[AndyHull]

On 1/14/2020 at 11:11 AM, Squiffything said:

I’m now an apprentice saddler! At 54! Working in a proper old school type workshop 

Leather working is a useful talent to develop. Don't forget to keep the leather scraps for making watch bands.
I may well be coming back for tips. My wife took up quilting about two years back, and as a result, I'm now pretty competent with a sewing machine (both stripping them down and servicing them and using them).

Here's the latest.

 

[Squiffything]

That is lovely I’m getting the hang of it but the industrial machines we use try to run away with me. 

I’m getting the hand stitching sorted and mainly doing repairs taking the load off the main guys in the workshop. My biggest problem is that I struggle to keep in mind the repair is just that. It does not need to be as good as new so I’m spending too much time trying to make it as perfect as I can. I’m learning though and loving it

[watchweasol]

Hi Squiffy  A  whole  new world opening up for you, Who says you can't teach an old dog new tricks, Ageism what crap.  If that was the case the House Of Lords would be empty.

 

[Squiffything]

It is indeed and Newmarket has a considerable amount of horses so plenty of work to keep me busy

[watchweasol]

Hi Squiffy Just interested how did you get on with the clock and control unit...    Hows the leather bussines going.

[Squiffything]

I managed to get the clock running by making a brass contact plate however although the clock runs and keeps good time the pendulum doesn’t swing as it should but more twitches so something is not right. 

The saddlery work is going well and I’m getting faster. Started training on the computer engraving machine so another string to the bow.

[watchweasol]

Hi Sqiffy  sounds like the impulse recieved by the magnet is not sufficient, still a control box prob;em.

good to hear the saddlery is going well this time next year you will be on top of it all, great to hear.