Jump to content

Haller pu81 electromagnetic pulse skeleton clock

Squiffything

By Squiffything
in All Things Clocks

 Share

Recommended Posts

watchweasol Distinguished Member

watchweasol

Posted
Posted

Hi Sqiffy  Have you any pictures   I think what you have got is an ATO clock that powers a coil that swings l/r on an arc, can you be more specific as regards damage. The ususall culprit for them not working was the transistor A (pnp) if I remember correctly. Ithink I have some info on them from the last one i did. 

Link to comment
Share on other sites
watchweasol Distinguished Member

watchweasol

Posted
Posted

Hi Squiffy  Common problem with battery driven units , the battery leaks and the salts  corrode the terminals.  As Andy said the terminal can be replaced with a bit of careful soldering. I have even repaired some quartz units by making new terminals from brass sheet, but better still the link supplied by Andy for the bay contains plenty of terminals, mustbe some on there  Cheers.

Link to comment
Share on other sites
Squiffything WRT Addict

Squiffything

Posted
  • Author
Posted
55 minutes ago, watchweasol said:

Hi  Squiffy Interesting if you could supply photos of the control unit opened up.

I will do when I get to it. It’ll mean taking it off and dismantling it first and I’m working during the day at my new job. I’m now an apprentice saddler! At 54! Working in a proper old school type workshop 

  • Like 2
Link to comment
Share on other sites
AndyHull Distinguished Member

AndyHull

Posted
Posted
On 1/14/2020 at 11:11 AM, Squiffything said:

I’m now an apprentice saddler! At 54! Working in a proper old school type workshop 

Leather working is a useful talent to develop. Don't forget to keep the leather scraps for making watch bands. :D
I may well be coming back for tips. My wife took up quilting about two years back, and as a result, I'm now pretty competent with a sewing machine (both stripping them down and servicing them and using them).

RIMG0316.thumb.JPG.d6b5b098244fc9b5574e8cb3c32916f1.JPG

Here's the latest.

 

Link to comment
Share on other sites
Squiffything WRT Addict

Squiffything

Posted
  • Author
Posted

That is lovely I’m getting the hang of it but the industrial machines we use try to run away with me. 

I’m getting the hand stitching sorted and mainly doing repairs taking the load off the main guys in the workshop. My biggest problem is that I struggle to keep in mind the repair is just that. It does not need to be as good as new so I’m spending too much time trying to make it as perfect as I can. I’m learning though and loving it850B5A79-68BB-4147-A7F8-0124E9BBCD74.thumb.jpeg.ed0b9e07cd3341194b39275f4cef2edd.jpeg17316B05-3D47-4E1F-B9E9-FA9222B8C42F.thumb.jpeg.cf3edf26d29aeef4aa6fa3291fc5328e.jpeg

  • Like 2
Link to comment
Share on other sites
  • 3 weeks later...
Squiffything WRT Addict

Squiffything

Posted
  • Author
Posted

I managed to get the clock running by making a brass contact plate however although the clock runs and keeps good time the pendulum doesn’t swing as it should but more twitches so something is not right. 

The saddlery work is going well and I’m getting faster. Started training on the computer engraving machine so another string to the bow.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • oldhippy
      Movement inserted from crytal side

      By oldhippy · Posted

      Before putting it back in the case I would fit the hands and use a pin vice on the stem to make sure the hands were in line. 
    • Jon
      Introducing myself

      By Jon · Posted

      Hi there  
    • Jon
      Movement inserted from crytal side

      By Jon · Posted

      Put the movement in a movement holder and it will be supported as you push down on the setting lever post to release the winding stem. Make sure the post is over the shoulder of the movement holder so what you are pressing down on is supported. As a general rule, hold the movement and not the movement holder. Replace the hands when the movement isn't in the case and support the centre jewel (if it has one) on a hard surface or staking block when replacing the hands to stop the jewel accidentally moving or even coming out. A dedicated movement holder with a central jewel support is even better, but pricey
    • JohnR725
      Main spring

      By JohnR725 · Posted

      It might help us if we knew which watch like model number.
    • Zedster
      Movement inserted from crytal side

      By Zedster · Posted

      Hi, guys I have a bit of a predicament and hopefully, somebody can advise. I'm working on a Roamer MST 521 where the movement is extracted from the crystal side. I'm now at the final hurdle where I need to replace the movement back into its case but I'm not sure of the correct procedure. I still need to fit the hands but that's where the problem lies. If I insert the winding stem to test the hands for correct alignment I will need to turn the movement over to release the stem again it's the spring-loaded type and needs a small bit of force to push down but with the hands fitted, I don't think I can do this on a cushion without causing some damage to the hands and that's the last thing I want to do, this watch has already been a love-hate relationship and I'm so close to boxing this one off which I'm counting as my first major project.  The other option is to case the movement then fit the hands and hope everything is okay. I've already broken the original winding stem but managed to find a replacement, the last one in stock, so I'm a bit reluctant to keep removing it. Any suggestions would be appreciated. 
×
×
  • Create New...