Jump to content

Gloves?

Hammilton

By Hammilton
in Tools & Equipment

 Share

Recommended Posts

Hammilton Member

Hammilton

Posted
Posted

I was wondering what kind of gloves you guys wear when working?  The ones I see in pics and videos look like regular plain white cotton gloves, is that right?  I was looking for a microfiber glove that wouldn’t leave any fibers behind, but I couldn’t find any for any reasonable price.  Is there anything wrong with nitrile besides not breathing at all?  I use those all the time at work, and I think they’d work fine, unless I’m missing some aspect.

Link to comment
Share on other sites
Marc Distinguished Member

Marc

Posted
Posted

Marigolds........  :D

 

Actually being the skinflit that I am I buy the powder free vinyl or nitrile examination gloves and cut the fingers off to use as cots. I find that the full glove is too sweaty, but proper finger cots seem to be a silly price.  This way I get 500 cots for about £4, or £1.50 if I find gloves at a car boot.

Link to comment
Share on other sites
Johnnie Super WRT Addict

Johnnie

Posted
Posted
48 minutes ago, Marc said:

Marigolds........  :D

 

Actually being the skinflit that I am I buy the powder free vinyl or nitrile examination gloves and cut the fingers off to use as cots. I find that the full glove is too sweaty, but proper finger cots seem to be a silly price.  This way I get 500 cots for about £4, or £1.50 if I find gloves at a car boot.

I do the same ! I find finger cots to tight and shut off the blood supply, so buy powder less rubber gloves and cut the fingers off. 

Link to comment
Share on other sites
jdrichard Distinguished Member

jdrichard

Posted
Posted
Marigolds........  [emoji3]
 
Actually being the skinflit that I am I buy the powder free vinyl or nitrile examination gloves and cut the fingers off to use as cots. I find that the full glove is too sweaty, but proper finger cots seem to be a silly price.  This way I get 500 cots for about £4, or £1.50 if I find gloves at a car boot.

So do you have an Amazon link for large finger cots or a link for gloves that I could turn into finger cots?


Sent from my iPhone using Tapatalk Pro
Link to comment
Share on other sites
jdrichard Distinguished Member

jdrichard

Posted
Posted
https://www.amazon.co.uk/Kingfisher-Powder-Disposable-Gloves-Medium/dp/B007AH0XPI
Buy which ever size gives you the most useful range of finger cot sizes.

Thanks Mark. Too much finger into lighter fluid action lately. But really my guitar playing doing the most temp damage. Relearning the lead break for stairway to heaven...know the rest of the song.ebd0fa1a42a94b103ec2689034d93995.jpg


Sent from my iPhone using Tapatalk Pro
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Rixy
      Broken lug

      By Rixy · Posted

      Thanks Dell. I thought about silver soldering. Have never done it but would like to give it a go. Do you think to put flux on the butted joint then run the solder in or to maybe brace it with a piece of scrap spring steel?
    • rossjackson01
      Without Our Forum

      By rossjackson01 · Posted

      Never and others. Yes, like you I do spend a fair amount of time reading the contents of this forum. I find it better that any other. Clear, lucid, no Prima Donas, and most of all an easy access without adverts. All thanks to Mark. God bless you mate. You give so much to many of us. What if? No Mark? Hypothetically. A forum. I did run a forum for a few years. Really enjoyed it, but became so engrossed that it did affect my health. I gave to to others to run. Not been back. It was very successful and rivalled a number of large paying sites. No adverts, no others but me. I did ask and listen to members comments and it worked well.    Costs Having a domain name, £10 annually.  Register the site with a forum company, free. Build the site using the forum company guide lines, free. It looked and ran almost the same a Mark's. All the same facilities. The cost was only £5 per month, but counted visits (views). If I recall, it was that price for 5,000 views. Each extra 5,000 views increased the price by £2 per month. Success was my own personal undoing. From £5 per month initially, it rose to £60 a month and looked like increasing. This was 10 years ago. I could not afford that, and asked it anyone would like to take over and someone did. I would assume that this is the price that Mark is funding for us all. His return is our continued comments on the internet about his course, and the fact that many of the big names on YouTube mention him as their Tutor. Those of us who have done, and are still using, his course, benefit. In comparison to other courses, I can't believe how cheap it is, and the value is exceptional. It is the structure that gives the value. Long may Mark reign. Ross  
    • TheQuietMan
      Help please.

      By TheQuietMan · Posted

      Hi all, total newbie to watchmaking and I've had a bit of a mishap. Just completing level 2 and was doing ok, but I was just on the last part of the reassembly of my ST3620 when the balance end stone shot across the room, just as I was trying to see if I had put the correct amount of oil between it and the balance end, aarrrgh! Been on my hands and knees combing the carpet for 20mins looking for it but to no avail. Does anybody know where I can get a replacement from and what to look for please?? Thanks.
    • Dell
      Broken lug

      By Dell · Posted

      Get someone local to tig it ,very easy fix and should only take a few minutes so probably wouldn’t cost much ,or failing that get it very clean and silver solder it. Dell
    • Zedster
      Movement inserted from crytal side

      By Zedster · Posted

      Hi, The winding pin is not split, well that's how it was when I obtained the watch. The movement is front-loaded and here's a picture of where the case screws are fitted. The face picture is before I dismantled it. Quick update.  I've always had a nylon ring sitting in the parts try that I wasn't sure where it went and left it to the last thing as I know it must be part of the case assembly. Anyway, looking at the picture in my last post you can see, just under the winding stem, a white-looking object, this is the nylon ring 🤭 So, I had to remove the dial again and replace the ring. Once this was all back together I placed the movement in the case and realized my initial problem maybe is not a problem as it looks like I can screw the movement back in the case and then place the hands as the dial is nearly flush with the outside of the case anyway so I'll be able to check for alignment. if all is good then just fit the crystal and bezel 🤔 I can't think of any issues with this approach but please comment if you think I've not thought of something. Another lesson learned as well. Take more pictures not just of the movement parts and location 😅
×
×
  • Create New...