Jump to content

VIBROGRAF M 700 LED SCALE


Recommended Posts

well, given my curisolity and the fact that I was once a "pinball wizard" I had to have a look inside this device.  Sure enough just as I thought there was a chance that something on the power supply was not quite right.  This volatge regulator was broken off the board. UA78M12HC F7911 - 12V bipolar 3 pin.   $14.00 on ebay :)  will do some voltage testing before I order it.  So about the "pnball wizard" - long story short is I was the lead technican for an amusment company for 10 years.  1980 - 1990.  It was an assistent directory at Columbia University that gave me the nickname of "JerseyMo".   

IMG_0593.jpg

IMG_0594.jpg

  • Like 1
Link to comment
Share on other sites

  • 2 weeks later...

Interesting. Do you have any better images of the boards that show the IC part numbers?

Is that device  heatsinked on the case next to the power board another regulator or a power transistor?

Any date codes on those chips?

Is it a mix of analog and digital or all analog?

What does that long steel roller at the front do?

 

Edited by AndyHull
Link to comment
Share on other sites

9 hours ago, AndyHull said:

Interesting. Do you have any better images of the boards that show the IC part numbers?

Is that device  heatsinked on the case next to the power board another regulator or a power transistor?

Any date codes on those chips?

Is it a mix of analog and digital or all analog?

What does that long steel roller at the front do?

 

no more pics, as I have put this back together and will listings it fr sale  "AS IS".

yes, that is another regulator and I'd say it was the 5v.  

did not look for date codes.  all digital that roller is just part of the display assembly.  

Was a fun porject and I was happy with the result and even more that I was able to remember the bascis of the electronics related to the power supply. :)

Link to comment
Share on other sites

  • 5 weeks later...
On ‎12‎/‎6‎/‎2019 at 1:42 PM, JerseyMo said:

no more pics, as I have put this back together and will listings it fr sale  "AS IS".

yes, that is another regulator and I'd say it was the 5v.  

did not look for date codes.  all digital that roller is just part of the display assembly.  

Was a fun porject and I was happy with the result and even more that I was able to remember the bascis of the electronics related to the power supply. :)

Hi , Came across this post today ,  Where have you listed it, can I get the reference.

Rgds

Anton

Link to comment
Share on other sites

Sorry Guys, 

I am  located in Germany.  Enjoy Measurement instruments related to  Time and Frequency Systems and have dabbled with the usual timers, hence keen to keep in touch with this topic. Not a watch Tech myself but more into electronics for daily bread.

Just joined up, & received the  email abt Forum rules. no reference to any commercial activity. How may I contact you  Jersey Mo. I believe a personal link for contact is allowed.

Nice to be here.

 

 

Link to comment
Share on other sites

More pictures of inside.   I just now notice all of the ITT components. They had a huge facility on route 3 East, a few miles from where I now work.  The location has recenlty been converted to a shopping mall.  

IMG_0817.jpg

IMG_0818.jpg

IMG_0820.jpg

IMG_0821.jpg

Edited by JerseyMo
Link to comment
Share on other sites

  • 2 years later...
  • 4 months later...
On 6/28/2022 at 11:44 PM, JayMcleran said:

Did any of you guys ever find a manual for one of these. I just purchased one myself and would be willing to pay for a copy of a manual if someone has one.

 

Thanks Jay

*****@*****.tld or

*****@*****.tld

no

Link to comment
Share on other sites

  • 8 months later...
On 3/17/2023 at 12:01 PM, southwesttimers said:

 I don’t know if it is acceptable  on this site to respond.

It would be acceptable if it was a PDF and preferably not a super huge file size. Just on the rare cases somebody actually makes it here to find the discussion.

Link to comment
Share on other sites

  • 3 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Sounds great! And yes, I would use grease for the keyless as well although treating the parts with epilame would make the grease less likely to spread in the long run. Not critical but won’t hurt. My current strategy is to epilame treat all parts getting in contact with oil or grease.
    • Hello everyone, for what it's worth, here is my approach: 1. Escape wheel submerged in Epilame, then dried quickly with a hairdryer. Then the final tip of the pivots are cleaned by poking into pithwood. The logic being that the Epilame is removed at the intended contact point (to avoid any residue that may mix with the oil), but remains in the areas where oil is not supposed to spread to (further down the pivot towards the wheel). The escape wheel teeth also benefit from having Epilame to keep the 9415 in place.  2. I use a syringe to treat only the pallet stones. I suspend the pallet fork with some Rodico so that the stones hang downwards. I notably use a rather thick needle where a drop WON'T form, but rather where the Epilame liquid stays in the needle tip, which I then dip into the pallet stones. It requires some practice to get the right amount of Epilame into the needle tip, but it works for me now. This way, no drop will "jump" onto the pallet fork and potentially go all the way to the pivots.  3. I let the movement run for a few minutes without lubricating the pallet stones... to scrape off the Epilame in the intended contact "channel". Then I remove the balance again and lubricate the exit pallet stone with 3-4 successive drops. See the "channel" that forms on the pallet stone in the picture -- not so easy to see, but it's visible.       I am conflicted about the use of Epliame in balance jewel settings. My impression is that the two jewels sufficiently suspend the oil (even 9010). Apparently Rolex recommends NOT to use Epliame there (heard from a former Rolex service center watchmaker), as it could cause additional wear. Apart from that, I follow specific instructions where I can find them. E.g. the infamous Rolex reverser wheels or sometimes (parts of) the seconds wheel. Exception: I'm currently servicing an Eta 2824 and will probably ignore the service sheet that recommends treating the whole keyless works with Epilame and then using HP1300... I'll skip the Epilame and use 9504 grease.        
    • I'm going to give this a try today/tomorrow on my UTC33/Seiko 66, thanks!
    • Hello and welcome from Leeds, England. 
    • Don't forget Mark is a hard working watch maker so he is also tied up with work. I'm sure he is keeping his eye on this forum making sure it is running along nicely. 
×
×
  • Create New...