Jump to content
Floppus

M A Ball

Recommended Posts

I inherited a clock over 30 years ago that must have been in the family almost from new. It is identical in appearance, size, as a 1907 Urania 400 day anniversary clock but apart from a serial number stamped on the back 32638, (in the same place and font as the Urania) there are no other markings except for an S and an F on the circular weight.  The dial has no markings but I understand that this is not abnormal as often retailers added there own mark. 

Is there any knowledge of a likely resource that might help provide any info. Thank you. 

Share this post


Link to post
Share on other sites

Take a clear photo of the back of the clock, just the works, not the legs.

Someone with the Horolovar repair guide might be able to identify it.

If it has a disc pendulum there might be a number stamped or written in pencil, this should match the main number, if the pendulum is original.  3 or 4 ball pendulum will not be numbered.

 

Bod 

Share this post


Link to post
Share on other sites

Hi As stated by Bod  If you can give a good clear picture of the back we may be able to identify the maker, not all 400 day clocks were marked up but the Horolovar book has a back plate indentification section so we have a chance. Also has it a disc or four ball pendulum.

Share this post


Link to post
Share on other sites

Hi  with a good clear picture of the back plate the saddle or suspension bracket and also the pendulum rotor there is a good chance we can ID the clock.  Had a look at the book no mention of Urania most likley the finishers or retailers brand name,  most were produced by Schatz, Kundo Haller Kern Hermle (FHS) and many others.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing

    No registered users viewing this page.

  • Topics

  • Posts

    • Which model is it? When was it last serviced?   Accutrons are backwards of mechanical watches, in that you have the power source turning the escape wheel, which then powers the train up through the hands. In a mechanical watch there is an increase in speed and a reduction of torque from each gearing to the next, so there is almost no power on the escape wheel. In an Accutron the tiny power and movement of each vibration of the tuning fork is increased by 7 or 8 fold at each gear set, so that at the hour and minute hands there is tremendous power. The instantaneous date system on a 218 model will shake your wrist! And it would stop or hinder a regular mechanical watch.   The upside is a well adjusted Accutron is very reliable and runs for years and years, the downside is that they will run long after the lubrication had dried and grind the pivots to dust. I suspect the friction between the driving wheel and canon pinion has become weak, and the canon pinion and hour wheel are sticky, so the watch runs but doesn't move the hands. As the seconds pinion is before this intersection it continues to move, and the hand setting works since that is another gearing that drives the canon pinion directly.   As it does run, it should just need a service. But the longer it runs in this state the more potential damage that can be done.
    • About an hour and a half, but I have some helpful stuff like a toolmaker's microscope to get the position of the steady pins, screw, and point where it should sit between two teeth, a CAD program I can import an image of an original jumper, trace,  and then scale a traced drawing to size, and a little CNC machine that cuts out the part. The spring section still starts at around 0.15mm and gets thinned by hand to about 0.04 or 0.05, that's where the fun is.
    • I understand this seems to be a common problem related to the canon. Does anyone have any advice or a link to a manual or diagram that can explain how to fix this?   the watch gums fine and when setting it the hour and minute hands move correctly. 
    • Has anyone got user manual of CASIOTRON 79CS-51. I bought the watch some 30 years ago. It,s named Casio Universal calender.
×
×
  • Create New...