Jump to content

Proclamation of smuggery!


Recommended Posts

Good afternoon everyone, here's a short message concerning a "Dinex" ladies watch that I bought from a boot fair as part of a job lot of scrap watches to practice on. This watch is a budget model with only one jewel. This jewel is a diashock type, (I think) and is situated to accommodate the balance pivot, (probably this is obvious to most of you!) I removed the spring clip that holds the jewel and it's metal end cap, cleaned the balance pivots and jewel, reassembled the balance then spent over two hours trying to put the diashock clip back into place, having "lost it" half a dozen times or more. Damn, those little blighters can fly! After finally retrieving it for the last time, I walked away and had a cup of tea. Whilst drinking this tea I had a brainwave. I measured the diameter of the jewel cap, found a piece of electrical wire sheathing of a slightly less diameter, about 1.6mm, held it in my pin vice and returned to the watch with renewed enthusiasm. I put the spring in place, positioned the sheathing over the clip and with light pressure, twisted the pin vice about an eighth of a turn. To my utter delight and sheer surprise it worked. I was even more delighted when I repeated this a further 3 times and each attempt was as successful as the first. Now I'm as smug as a Jehovah's witnesses on the doorstep of someone with a sympathetic ear! Here are some photos of the simple, but wonderful little tool I made, it might prove to be helpful to any beginners out there, such as myself. 

Happy Diashocking everyone, Happy Diashocking!

 

IMG_20191116_162536.jpg

IMG_20191116_162243.jpg

IMG_20191116_162107.jpg

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I dont think mine is. Its an idea to have them all in one place if possible, then a quick screenshot will have them saved. Unless anyone has any other ideas of how to reconnect 
    • My email address is in my profile, feel free all to drop me a quick hello. 
    • I have an Enfield mantel clock with a broken mounting lug (see photos). Does anyone have any suggestions about the best way to proceed?
    • Thanks VWatchie! I did spot your walkthrough thank you. And you are spot on about the movements too!   Nick
    • Yup watchie you are entirely on my wavelength with this , you actually said what i was hinting at, what if something happens to mark ? Will someone be able to take over ? Its not that long ago that the forum was down and Mark had to step in and fix it. And you are right a wealth of information that does not exist as a whole anywhere on the planet will be lost. Can that be archived elsewhere? It would be an absolute shame if the plug was pulled without warning, i would like to think Mark wouldn't do that to us. And like i said in my first post i talk about things other folk might be affraid to.  So lets not skirt around anything. It might be nice to have a place where we can all drop our emails just in case so we always have that contact. Can you make that happen  Old Hippy ?  i kind of think of you as the pops of the forum 🙂
×
×
  • Create New...