Jump to content

Would you consider this acceptable performance for a 1940s Bulova?


patchwerk

Recommended Posts

I recently serviced a Bulova 10BM from a 1917-H US Military Watch and cant decide if I need to redo it. The amplitude is solid but the rate is rather eratic over long periods like 14 hours. The watch has ran for several days now after servicing

 

This first reading starts a little bit after a full wind (so maybe it is caused by the mainspring weirdness that happens at full wind) and goes for 13 hours

This second one is somewhat later and covers 6.5 hours of run time. The rate is steadier but still has the 10 second deviations jumps.

Would you be satisfied with this for a watch from the late 40s/early 50s? I know a lot of people dont do long term measurements like this so am I just over analyzing it?

 

image.thumb.png.73896f708defa3044c51b81ece02a8ba.png

 

image.thumb.png.d40dc89d881b452917f4c2366c631ebb.png

 

 

 

Link to comment
Share on other sites

I would suspect there is still some slight wear or perhaps dirt causing issues, but given the age of the watch, I personally would be reluctant to do much more to it.
image.png.f003c431d58f56f062d66a9e81d617f2.png

Any idea what caused this little glitch?

Also if you look at the variation in the amplitude, it appears to have a very specific period to it. This suggests perhaps slight eccentricity, localized wear, or dirt on one of the wheels or perhaps the second or tube hand rubbing.

Depending on the regularity of this error, you may be able to figure its source out.
 

Link to comment
Share on other sites

Military watch ? War time vintage?God only knows what stories it could tell. What it is telling me now, is that it is a well serviced , well worn watch.Speaking as an old Grunt, I would tell you that we don't like to be poked any more than is necessary.

Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Thank you for your introduction and welcome to this friendly forum. We all look forward to your contributions and continued involvement.  When it comes to tools buy the best you can afford a good set of watch makers screwdrivers if you look after them will last you a life time. I recommend Dumont tweezers Number 3 and number 5 for fine work, you can build up from there. You will need different strength eye glasses. Some now like to work using a microscope. Pliers the box jointed ones are best they don't go out of line.     
    • That we will, don’t really mind what the movement is, I’d like to find info on the maker, google is a little sparse and none of my reference books are coming up with anything 
    • Welcome to the forum, enjoy. Purchasing the best quality tools (if affordable) is the best option. However the skill of how to use them is even more important. 
    • My guess, a pin pallet, BFG? We'll see. 
    • @Randy55 welcome, here are some  screwdrivers I can highly recommend, not the cheapest out there, but I prefer them to my Bergeon ones.: And for tweezers I can't recommend highly enough the CousinsUK own brand titanium (link here), I even prefer them to the Dumont tweezers I have, here is my write up: Other piece of advice would be to 'cut to the chase' and get a trinocular microscope on a boom arm, I tried all kinds of loupes and visors etc, but now do 90% of my work on the scope.
×
×
  • Create New...