Jump to content

Would you consider this acceptable performance for a 1940s Bulova?


patchwerk

Recommended Posts

I recently serviced a Bulova 10BM from a 1917-H US Military Watch and cant decide if I need to redo it. The amplitude is solid but the rate is rather eratic over long periods like 14 hours. The watch has ran for several days now after servicing

 

This first reading starts a little bit after a full wind (so maybe it is caused by the mainspring weirdness that happens at full wind) and goes for 13 hours

This second one is somewhat later and covers 6.5 hours of run time. The rate is steadier but still has the 10 second deviations jumps.

Would you be satisfied with this for a watch from the late 40s/early 50s? I know a lot of people dont do long term measurements like this so am I just over analyzing it?

 

image.thumb.png.73896f708defa3044c51b81ece02a8ba.png

 

image.thumb.png.d40dc89d881b452917f4c2366c631ebb.png

 

 

 

Link to comment
Share on other sites

I would suspect there is still some slight wear or perhaps dirt causing issues, but given the age of the watch, I personally would be reluctant to do much more to it.
image.png.f003c431d58f56f062d66a9e81d617f2.png

Any idea what caused this little glitch?

Also if you look at the variation in the amplitude, it appears to have a very specific period to it. This suggests perhaps slight eccentricity, localized wear, or dirt on one of the wheels or perhaps the second or tube hand rubbing.

Depending on the regularity of this error, you may be able to figure its source out.
 

Link to comment
Share on other sites

Military watch ? War time vintage?God only knows what stories it could tell. What it is telling me now, is that it is a well serviced , well worn watch.Speaking as an old Grunt, I would tell you that we don't like to be poked any more than is necessary.

Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Well done, let us know how you get on with the citizen. 
    • @Neverenoughwatches Rich, I can only agree with you wholeheartedly. I spend a lot of time here learning all sorts and trying to make any little contribution to help others I can. Nothing can last forever and I wish I could do more to contribute to the forum financially and any other support I could.   Tom
    • This forum is a big part of my life. When I retired from horology many years ago due to poor health I missed what I had trained for. On here I can still do my bit in helping and advising others and have a little fun as well.  
    • First thing this morning, make coffee, second, check the forum.  I would really miss the forum, not on any social media, not interested in telling the world what I had for breakfast!!! I do consider most of the regulars friends and would wonder what had happened if they stopped posting. 
    • Hi all Thought I'd show my small and trying to keep under control watch collection! Apart from the Enicar all were under £12! At least if I destroy them in the process then I won't be too worse off. A few pics to start off with First of all my first attempt. A Thuya pocket watch. It was only running face down and would stop when vertical. So now it still works face down and only slows down when vertical so at least an improvement! 😄  I only have a generic watch oil at the mo so that won't help but I'm hoping to get some more appropriate oils in a couple of months for my birthday. I did have to get a crystal for it since it didn't come with one. It didn't look as though it would friction fit (and I don't have a crystal press in any case) so I glued it to the case with PVA. So far so good. Next up above are a sekonda and citizen automatic. Both non runners. Both with broken balance wheels amongst other things. I'm hopeful the citizen will start when I get the new one I ordered but the sekonda is being kept for spares and trial of new techniques. And finally the Enicar and the timemaster. Both running when I got them. I wanted to get running watches so that at least I stood a fighting chance of still having a running watch after the service! It was all going well on the Enicar until I dropped the balance wheel during reassembly...😔. Unfortunately they are quite expensive to get so for now I'll won't do anything with it but I would like to fix it at one point. The timemaster is still running (yeah!) but I managed to break a dial foot during the deassembly. First repair attempt failed so now I am looking at soldering it back on... So there we go. My initial foray into this great hobby. Thanks for sticking with this tale so far.  I'm hoping that once the balance wheel arrives for the citizen I will be able to say I bought a non runner and fixed it! So fingers crossed. Thanks for looking, Nick
×
×
  • Create New...