Jump to content

My first hand assembled, custom watch.

FLwatchguy73

By FLwatchguy73
in Your Watch Collection

 Share

Recommended Posts

FLwatchguy73 Super WRT Addict

FLwatchguy73

Posted
Posted

Hello everyone,

 I just wanted to show off my first custom build. I've always wanted something that never existed anywhere before. I knew I wanted to base it off the venerable Swiss 6498 manual wind movement. I also wanted to use an old 12s pocket watch dial because they are fairly close in size to the 6498 dials and could work with a few minor modifications. I first sourced a dial, after some lengthy searching, I found a NOS Elgin. It had never been used and had the perfect visual feel I was going for. The numbers were all gold and in keeping with that vibe, I next ordered a gold colored Chinese case for the 6498. I also found an old Arnex pocket watch with a pristine 6498 movement but a rough case. I had the hardest time deciding what strap I should use. I knew I wanted leather, but that was it. I had nearly settled on an Ostrich strap but I happened upon a Russian made Laco strap and fell in love with it. It has a very unique design that would be perfect for my watch. As the parts began arriving I could almost see it on my wrist. The very last item to arrive was the case, 8 weeks from China, I think maybe they walked it to my house. I fist started with the dial. I clipped the dial feet off and then proceeded to slot the sub seconds hole as the Elgin 12s sub seconds hole was closer to the center than the one on 6498. And yes, the seconds hand is not centered in the sub seconds face, but I'm not the least bothered by it. I had to modify the movement retaining ring also as the Elgin dial is quite a bit thicker. I was able to reuse the hands that came with the Arnex because they fit my theme well. S0, this is a true Frankenstein with Swiss, American, Chinese and Russian parts, but it's all my design. I love it. Thank you for reading.

20190413_070315.jpg

20190517_102853.jpg

20190517_102911.jpg

20190517_103035.jpg

s-l1600 (2).jpg

s-l1600 (3).jpg

  • Like 3
Link to comment
Share on other sites
FLwatchguy73 Super WRT Addict

FLwatchguy73

Posted
  • Author
Posted
14 hours ago, eccentric59 said:

Nicely done. You're so right, that strap is perfect.

Thank you. One of the reasons I was attracted to it was the patina'd brass hardware. Generally speaking I'm not a fan of gold watches and this was quickly becoming too much. The patina'd brass nicely compliments the gold of the movement, dial and case without overshooting my goal.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Randy55
      Introduction

      By Randy55 · Posted

      Welcome to the group Stirky. You can search for just about every subject in the craft here. Don't be afraid to ask if you can't find the answer that may have already been covered ( some ad nauseum LOL ). You don't have to buy Bergeon to get good quality. There are many decent mid-range tools available that will last you a lifetime. Cousins would be a good place to start . Cheers from across the pond ! Randy
    • Jon
      What are these Seitz B-Jewels?

      By Jon · Posted

      I picked up a similar amount of these jewels some years ago in a watch and clock fair. Every now and then they come in handy. This week I've got a rubbed in bombe jewel in the balance cock that is cracked and needs replacing. Very handy to have a vintage assortment of these type of jewels!
    • Stirky
      Diagram for 6497 motion works

      By Stirky · Posted

      Thanks Jon.
    • Jon
      Diagram for 6497 motion works

      By Jon · Posted

      Great diagram with the teeth and pinion count. Simple way to reduce the speed of the hour wheel by the 12:1 minute wheel. Genius and yet so simple. Always good to reinforce the principal by what you have done in your drawing. Keep doing that. I had a drawing on my wall for years showing me this which is very similar to the drawing you have done. Here's a formula to work out the beats per hour of a watch movement. The movement's BPH is dictated by the wheel teeth and pinion count and the hairspring being vibrated to the correct BPH by finding the pinning up point on the hairspring using a vibrating tool.  The reason in the formula there is X2 on the top line is because there are two pallet stones.
    • DDean
      Incabloc Lyre Spring & Low Earth Orbit

      By DDean · Posted

      So I just wanted to say "thank you" again.  The angle is the key bit it seems and yes, it did basically just fall, or float, back into position when I got it lined up just right. I had meant to add that now that I see how it goes in, I totally see how it came out in the first place, and that whomever cloned the original movement didn't pay much attention to the fine details around the setting or how it interfaces with the balance cock or the "rings" on the regulator and/or stud carrier arms.
×
×
  • Create New...