Jump to content

Pallet Warmer Project

Mark

By Mark
in Your Walkthroughs and Techniques

 Share

Recommended Posts

Mark Distinguished Member

Mark

Posted
Posted

Editing a video on the construction at the moment. 

Need to reset the pallet stones in a vostok which was loaded up with too much shellac. Unfortunately my pallet warmer is missing - searched high and low - I suspect it's in pallet warmer heaven. So I made a new one. Hopefully this will be an interesting video for some. In fact - I made two. Will do a giveaway to a winner for one of them. Details will be announced in my next video which will show how I made these and the video after that will the Vostok restoration where I will demonstrate how they are used.

In the meantime - if anybody wants to build one themselves, I have attached the plans to this post. If you do make one then post pics :)

pallets.jpg

pallet-warmer.jpg

pallet-warmer2.jpg

pallet_warmer_sketch.png

pallet_warmer_sketch2.png

Pallet Warmer Plans.pdf

  • Like 3
Link to comment
Share on other sites
Mark Distinguished Member

Mark

Posted
  • Author
Posted
Nice one, thanks for the plans.... Strangely enough I was just looking for mine before reading this and found it.
Maybe your lost one is with Bagpuss?
1996946093_20191111_1252421.thumb.jpg.ca93f72c392349a88ce9b5395c8aa033.jpg
Yikes - bagpuss. Now that's a blast from the past!

Sent from my SM-G950F using Tapatalk

  • Like 1
  • Haha 2
Link to comment
Share on other sites
oldhippy Distinguished Member

oldhippy

Posted
Posted
32 minutes ago, watchweasol said:

Hi  Likewise Old H do you remenber Andy Pandy and Teddy , Watch with Mother,   not forgetting the Interlude....

Watch with Mother Monday

Andy Pandy Tuesdays

Rag Tag and Bobtail Wednesday

Bill and Benn Thursday

The Wooden Tops Friday.  

Link to comment
Share on other sites
Mark Distinguished Member

Mark

Posted
  • Author
Posted
A nice video Mark. What type of lathe are you using?
@oldhippy Sorry for late reply.
It's a mini bench lathe made by a company called Optimum. A relatively new addition to the workshop along with the mill.
761cd7f46b1fd130a335b5ee54b960dc.jpgefd09d341be590b70a66549f5ac6e60a.jpg

Sent from my SM-G950F using Tapatalk

Link to comment
Share on other sites
m1ks WRT Addict

m1ks

Posted
Posted
1 hour ago, TheFixer said:

I have the copper plate so just need some brass.

Any chance of a picture with the wooden holder without the tool itself?

You can see it clearly in the video Mark uploaded, he shows the machining out process but it could be easily done with a chisel or by tacking sides onto a flat piece.

  • Like 1
Link to comment
Share on other sites
Mark Distinguished Member

Mark

Posted
  • Author
Posted
On 11/15/2019 at 10:59 PM, oldhippy said:

Thank's Mark for the reply and nice photo. That's a new one on me I'll look that one up. 

Is it the Light Duty Lathe Optimum TU2004V 240v Variable Speed?

Absolutely - thats the one. So far I have had a few issues with it but noting major.

The gib in the compound slide was bent - easy fix but I need maybe add a couple more gib screws to make it more smooth and it came with an extraordinary amount of grit on the lead screws and ways. This is common with chinese lathes I think but didn't expect it with "German quality" - lesson learned :D

I would like to install a thrust bearing too, to minimise  backlash. But the parts I have made so far are quite accurate not bad for a light duty lathe. Not unhappy.

 

13 hours ago, TheFixer said:
I have the copper plate so just need some brass.
Any chance of a picture with the wooden holder without the tool itself?

There you go9fd5114a1d5f9cd0f0957a0133eaa82d.jpg

Sent from my SM-G950F using Tapatalk
 

Link to comment
Share on other sites
TheFixer WRT Addict

TheFixer

Posted
Posted
8 hours ago, Mark said:

Absolutely - thats the one. So far I have had a few issues with it but noting major.

The gib in the compound slide was bent - easy fix but I need maybe add a couple more gib screws to make it more smooth and it came with an extraordinary amount of grit on the lead screws and ways. This is common with chinese lathes I think but didn't expect it with "German quality" - lesson learned :D

I would like to install a thrust bearing too, to minimise  backlash. But the parts I have made so far are quite accurate not bad for a light duty lathe. Not unhappy.

 

There you go9fd5114a1d5f9cd0f0957a0133eaa82d.jpg

Sent from my SM-G950F using Tapatalk
 

Thank you Mark that is very helpful.

Link to comment
Share on other sites
  • 4 weeks later...
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • ManSkirtBrew
      1972 Bulova President "E" Sea King 11ACACB movement

      By ManSkirtBrew · Posted

      Oh nice. I have a similar wedge style stump for my staking tool, so I'll give that a shot. Thanks!
    • joelcarvajal
      Gamblin Gamsol for cleaning?

      By joelcarvajal · Posted

      Thank you all for the replies!  Very informative! True enough, the Gamsol took some time to evaporate and does leave a residue. So not all naphtha are created equal!  Need to find alternatives then. i was able to try Hexane recommended by Alex and it seems great.  I wonder what the cons are?
    • GuyMontag
      1972 Bulova President "E" Sea King 11ACACB movement

      By GuyMontag · Posted

      Yeah, I saw that in the tech sheet but I don't see how it can be adequately cleaned with the friction pinion still in place. I've accidentally pulled the arbor right out of the wheel once when I used a presto tool to try and remove it. Mark shows how he does it with the Platax tool. Those are a little too pricey for me so I got one of these from Aliexpress and I just push down on the arbor with the end of my brass tweezers. That usually gets it most of the way out and then I just grab the wheel with one hand the and the friction pinion with the other and gently rotate them until it pops off. Probably not the best way but it's seemed to work for me so far.    
    • Zedster
      Movement inserted from crytal side

      By Zedster · Posted

      Thanks, Jon Sounds like a plan. Obviously I'll have the face on so do you think gripping with the holder will create any problems, but I will check in the morning to see how feasible it is but I assume it only needs to be lightly held. As for holding the movement instead of the holder won't be possible in this scenario as one hand will be puling on the stem while the other pushes the spring down. That was my initial concern is how the hell can I do this with only one pair of hands. All the other times I've had to remove the stem hasn't been a problem, apart from the force required to release the stem from the setting lever, but now I need to fit the face and hands its sent me into panic mode. If it had the screw type release things would be a lot simpler but that's life 😀   Another thing I will need to consider is once the dial and hands are fitted and the movement is sitting in the case I will need to turn it over to put the case screws in. I saw a vid on Wristwatch revival where he lightly fitted the crystal and bezel so he could turn it over, is this the only option or is there another method?      
    • nevenbekriev
      Main spring

      By nevenbekriev · Posted

      Hi Jon, do You think that relation spring torque - amplitude is linear? I would rather guess that the amplitude should be proportional to the square of the torque. I had once idea to check it, but still haven't.
×
×
  • Create New...