Jump to content

Pallet Warmer Project


Mark

Recommended Posts

Editing a video on the construction at the moment. 

Need to reset the pallet stones in a vostok which was loaded up with too much shellac. Unfortunately my pallet warmer is missing - searched high and low - I suspect it's in pallet warmer heaven. So I made a new one. Hopefully this will be an interesting video for some. In fact - I made two. Will do a giveaway to a winner for one of them. Details will be announced in my next video which will show how I made these and the video after that will the Vostok restoration where I will demonstrate how they are used.

In the meantime - if anybody wants to build one themselves, I have attached the plans to this post. If you do make one then post pics :)

pallets.jpg

pallet-warmer.jpg

pallet-warmer2.jpg

pallet_warmer_sketch.png

pallet_warmer_sketch2.png

Pallet Warmer Plans.pdf

  • Like 3
Link to comment
Share on other sites

Nice one, thanks for the plans.... Strangely enough I was just looking for mine before reading this and found it.
Maybe your lost one is with Bagpuss?
1996946093_20191111_1252421.thumb.jpg.ca93f72c392349a88ce9b5395c8aa033.jpg
Yikes - bagpuss. Now that's a blast from the past!

Sent from my SM-G950F using Tapatalk

  • Like 1
  • Haha 2
Link to comment
Share on other sites

32 minutes ago, watchweasol said:

Hi  Likewise Old H do you remenber Andy Pandy and Teddy , Watch with Mother,   not forgetting the Interlude....

Watch with Mother Monday

Andy Pandy Tuesdays

Rag Tag and Bobtail Wednesday

Bill and Benn Thursday

The Wooden Tops Friday.  

Link to comment
Share on other sites

A nice video Mark. What type of lathe are you using?
@oldhippy Sorry for late reply.
It's a mini bench lathe made by a company called Optimum. A relatively new addition to the workshop along with the mill.
761cd7f46b1fd130a335b5ee54b960dc.jpgefd09d341be590b70a66549f5ac6e60a.jpg

Sent from my SM-G950F using Tapatalk

Link to comment
Share on other sites

1 hour ago, TheFixer said:

I have the copper plate so just need some brass.

Any chance of a picture with the wooden holder without the tool itself?

You can see it clearly in the video Mark uploaded, he shows the machining out process but it could be easily done with a chisel or by tacking sides onto a flat piece.

  • Like 1
Link to comment
Share on other sites

On 11/15/2019 at 10:59 PM, oldhippy said:

Thank's Mark for the reply and nice photo. That's a new one on me I'll look that one up. 

Is it the Light Duty Lathe Optimum TU2004V 240v Variable Speed?

Absolutely - thats the one. So far I have had a few issues with it but noting major.

The gib in the compound slide was bent - easy fix but I need maybe add a couple more gib screws to make it more smooth and it came with an extraordinary amount of grit on the lead screws and ways. This is common with chinese lathes I think but didn't expect it with "German quality" - lesson learned :D

I would like to install a thrust bearing too, to minimise  backlash. But the parts I have made so far are quite accurate not bad for a light duty lathe. Not unhappy.

 

13 hours ago, TheFixer said:
I have the copper plate so just need some brass.
Any chance of a picture with the wooden holder without the tool itself?

There you go9fd5114a1d5f9cd0f0957a0133eaa82d.jpg

Sent from my SM-G950F using Tapatalk
 

Link to comment
Share on other sites

8 hours ago, Mark said:

Absolutely - thats the one. So far I have had a few issues with it but noting major.

The gib in the compound slide was bent - easy fix but I need maybe add a couple more gib screws to make it more smooth and it came with an extraordinary amount of grit on the lead screws and ways. This is common with chinese lathes I think but didn't expect it with "German quality" - lesson learned :D

I would like to install a thrust bearing too, to minimise  backlash. But the parts I have made so far are quite accurate not bad for a light duty lathe. Not unhappy.

 

There you go9fd5114a1d5f9cd0f0957a0133eaa82d.jpg

Sent from my SM-G950F using Tapatalk
 

Thank you Mark that is very helpful.

Link to comment
Share on other sites

  • 4 weeks later...


  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Like losing Ranfft. That was a wake up call. We took his website for granted. Miss him terribly.  
    • Its 4 o'clock in the morning here in the Uk, i cant sleep, i dont sleep, not much ever really. My brain never shuts off to rest, I'm just a constant thinker, i have to be very tired to be able to sleep,  i guess eventually it will be my undoing and my health will suffer because of it I'm sure. But while I'm here i want to get as much out of life as i can, and give as much as i can, to help,maybe to make a difference to someone's life if that is within my capability,recent events have made that need even more clear to me. I'm not sure where I'm going with this or why i bring it up , or if its relevant to want i want to talk about its just in my head right now. What i do want to talk about is something thats been on my mind for ages. I like to be prepared,  I'm not fond of surprises because surprises take control away and i am a bit of a control freak at times. This forum, Our Forum if i can call it that, is here because of two reasons. The guy that created it and keeps it funded and the people that joined it.  Without either, it would not exist, and lets face it one day it won't ( I'm a realist and i talk about things others dont or who are afraid to in other words folk that dont particularly prepare for the inevitable). How many of us visit here regularly ?  How many among us almost depend on the forum as a way of socialising because they are stuck at home and how many of us has it become part of a daily routine to check in and see if they can offer advice or get help with something they are working on or just to have a chat and engage in some banter. The members here are in the thousands and thousands have disappeared over the years many had just a fleeting visit. But there are a good few of us that know each other quite well and visit regularly. I dont know about you but i wouldnt want to lose that communication with you all, in all honesty it has become an important part of that side of my life and helps to feed my passion for all things watches. Some of you may think differently and thats ok, some of may stop and think # what would i do " Without Our Forum " # 
    • Naptha appears to be a general name and its content can be varied depending upon what it's specific use is. Lighter fluid as an example can be light or heavier also with other ingredients to help it burn. Try sesrching for benzine ( as opposed to benzene which is linked to causing health issues ) . There are other fluids such as ethanol that you could try and also methylated sprirts, mostly ethanol with a small percentage of methanol added. Experiment with any new chemical to see how quickly schellac dissolves in its presence. I have tried a few things but hexane is not one of them, i understand it does evaporate very quickly.  Be sure sure to check out any safety data on chemicals you try. Toxicity of fumes and flash point information, ultrasonic machines can heat up fluids even without a heater function. And of course always ask here for personal opinions when trying a new substance. 
    • I have that set and really like it. I prefer that crystal holder over the one that came with my Bergeon claw tool and any time I use the claw I use this one instead of the Bergeon one, just an additional bonus with this tool.
    • Is the Roamer not a split stem? I'm confused on your how your case is put together. If it is a front loader where is it you are putting the case screws? I love me some Roamer, do you have any photos?
×
×
  • Create New...