Jump to content

Seiko 6139-6010 aka "Bruce Lee"


Recommended Posts

Hello guys. This is my last project – Seiko 6139-6010 aka Bruce Lee. Watch is from ‘69and it is based on the 6139A movement. Nice shot for the 50th Seiko anniversary of first automatic chronograph development. So please see the pictures below from all restoration proces. It took me 3-4 evenings.

The watch came to me as non runner. Crystal was scratchy with many chips. Dial was dirty and dusty with signs of water damages. Hands lost their lume. Day calendar was loosen and didn’t work properly. Movement was complete but very dirty and dry – there weren’t any residues of old oil in the jewels. Somewhere were signs of water flood. I dissasembled movement and I gave it a bath in ultrasonic cleaner then i’ve assembled and oiled movement. Star disk od date wheel was repaird with small amouth of resin glue. Movement had tend to stop sometimes. Inspection showed that the tiny chip on the bottom pivot of the escape wheel. It was hard to see it. After replacment movement ran as a champ. I polished the hands cause there was rust and gave them new lume. Dial was cleaned. I didn’t touch the lume on the hours indexes. I was affraid to screw up it. I think now it is quite good despite the fact that the lume does not glow. Orginal crystal was polished but I decide that in the future I will replace it. Case and caseback got some polish works only with polishing paste, not too much cause I didn’t want to loose the sharpnes of orginal edges – as usual I did it. Bracelet was matted with abrasive wool. Everything was mix up and combined and there is the result.

After measurments on timegrapher and adjustment it is a nice timekeeper. An amplitude satisfy me as well. Now I am enjoy to wear it.

Please let me know what do you think of this restoration project and about my works on it. I appreciate your comment and your spend time. Cheers folks

 

 

IMG_20191014_154601.jpg

IMG_20191014_154607.jpg

IMG_20191014_154613.jpg

IMG_20191014_154619.jpg

IMG_20191014_154629.jpg

IMG_20191014_154752.jpg

IMG_20191014_154757.jpg

IMG_20191014_154818.jpg

IMG_20191014_154859.jpg

IMG_20191014_155213.jpg

IMG_20191014_155225.jpg

IMG_20191014_155330.jpg

IMG_20191014_155404.jpg

IMG_20191014_155811.jpg

IMG_20191014_225105.jpg

IMG_20191014_233211.jpg

IMG_20191015_173657.jpg

IMG_20191016_203151.jpg

IMG_20191016_203221.jpg

IMG_20191016_211539.jpg

IMG_20191017_192259.jpg

IMG_20191017_192308.jpg

IMG_20191017_192323.jpg

IMG_20191017_194346.jpg

IMG_20191017_194355.jpg

IMG_20191017_194406.jpg

IMG_20191017_194415.jpg

IMG_20191017_194504.jpg

IMG_20191017_194511.jpg

IMG_20191017_194520.jpg

IMG_20191017_194534.jpg

IMG_20191017_194539.jpg

IMG_20191017_194559.jpg

IMG_20191017_194939.jpg

IMG_20191017_194944.jpg

IMG_20191017_194952.jpg

IMG_20191017_194957.jpg

IMG_20191017_195013_HHT.jpg

IMG_20191017_195022_HHT.jpg

IMG_20191017_195352.jpg

Edited by jackie01
  • Like 7
  • Thanks 2
Link to comment
Share on other sites

Wide range of restorative attempts and I say good job, too many to master all though. 

I buy more selectively focusing on the work you enjoy tirelessly. 

Cute balance cock stand tell about the artistic person in you.

All the best.

 

Link to comment
Share on other sites

  • 4 months later...

Hello, I ha e this watch, which needs a service and maybe a mainspring.

Can you repair/service it for me please..? 

It has been cleaned inside by my friend.

We thinking that the mainspring needs replacing.

Please help...

Regards 

Zak

Link to comment
Share on other sites

8 hours ago, Zak said:

Can you repair/service it for me please..? 

Hi, this is only a discussion forum. Members are not allowed to offers goods or services for sales.
You will have to locate a reputable repairer local to you. You can also check a Seiko forum like SCWF for recommendations.

Edited by jdm
  • Thanks 1
Link to comment
Share on other sites

5 minutes ago, Klassiker said:

Or, using this excellent forum to help you, learn how to DIY. Much more satisfying.

The OP's friend had a go to the piece already, and if I guess correctly it now suffers of low amplitude, a typical Seiko issue, not easy to correct and for which a new mainspring is just a part of the cure.

I think that for a beginner to attack a desirable chronograph of EUR 400 starting value would a big mistake with slim chances of  success. Much better to give it to a professional, pay a fair price, and enjoy the watch in its best conditions and in conditions to be passed down or resold.

Link to comment
Share on other sites

  • 2 months later...


×
×
  • Create New...