Jump to content

Cost of a Rolex etc


Recommended Posts

Part of the price is definitely the brand name, but Rolex does use higher quality materials, higher tolerances in making the watch and still hand finish a lot of the parts, and that does add a lot of cost to the watch.

There are 2 types of expensive watches.

1) High end brand, Rolex, Longines, Patek Philippe etc. These brands a lot of the price is the workmanship

2) Fashion brand watch. These are watches branded with a high end fashion name. The Fashion house may design the watch case but almost always buy in the movement. Usually the movement will be of reasonable quality, but its not uncommon to find a watch that sells for $500 to only have a movement that sells wholesale for $50 in it. This type of watch you are paying to wear the name not the quality of the watch.

 

But if you want to see what goes into making the real top end brands go watch the videos by Roger Smith on Youtube and you will understand why his watches are so expensive.

https://www.youtube.com/user/rwsmithwatches/videos

 

Link to comment
Share on other sites

I think part of what customers pay, goes to fund the traditional ongoing research that Rolex has historically been and is at the forefront of ever since the early days of its inception. 

There is also some polletical clout behind the brand, hard to find a wrist of sheikh something ben something else that is not advertising the brand.

A lot of folks including me, don,t really know more than what I read about the technical advancement at Rolex and the quality I feel holding a Rolex piece. 

I wonder what the market's worth of the brand itself is. Just today I see an advert showing a pic of Rolex, opened the page only to watch fashion clothing.

Whatever it is that Rolex has done and is doing,  it sure is working. Ticking the kid and the successful businessman in us. 

Other brand need introduction, Rolex introduces us.

Link to comment
Share on other sites

7 hours ago, stevew said:

Always wondered how much it actually costs to make a Rolex or any other Expensive Brand. I know you pay Thousands for such Watches, but in Reality i wonder how much was to be built?

Look at the cost of a new movement or a movement of comparable quality, cost is probably 30-50% of that.  Add a bit for dial, case and strap.  Add on the weight cost of precious metals if any.  The rest is fashion which is polite way of putting it.    A few hundred dollars, sans gold, is my guess, maybe a bit more as I'm just guessing at the case/band/dial cost.

 

Edited by measuretwice
Link to comment
Share on other sites

15 hours ago, stevew said:

Always wondered how much it actually costs to make a Rolex or any other Expensive Brand. I know you pay Thousands for such Watches, but in Reality i wonder how much was to be built?

I'd say it is maybe 10% - 20% of the selling price. than add in distribution, operational, development, advertising and all other costs and that gap quickly narrows.   

Link to comment
Share on other sites

6 minutes ago, swisschronic said:

an okay quality watch that was made with precision is always a pleasure to wear in my opinion. like a 1 dollar sapphire crystal is still a sapphire crystal right? be sure to spend the extra 35 cents for a cyclops that magnifies 2.5 times though.. :)

quality aside.  a fake is a fake no matter how well it is made.  

Link to comment
Share on other sites

Famous painters might paint a water colour in 4 hours. 50cents paper and paints. worth a fortune. Go figure.

I heard a story about Picasso who used to sign table cloths in restaurants after entertaining a large group and never got billed. He also said he could buy a house if he painted something....

Sure there is clever marketing in watches, but I don't think the inherent value is actually in the materials...perhaps its something else less tangible.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Thank you for the advise!! It worked. The setting screw was a lock/unlock to remove the rotor. 
    • I have that French tech sheet too, it is a little different than the English one (eg, it doesn't have the auto works diagram). BTW, it looks like you are looking up the case number in the 1979 ABC supplement. The 1974 ABC catalog does have the 3093 case. As you determined it takes the 1222-5 crystal.  When I serviced my President 'A' (which also takes that crystal), I was able to fit a 29.8 crystal from my DPA crystal assortment. Those are, in my opinion, a great deal. The assortment comes with 10 sizes each from 27.8mm to 32.4mm in 0.2 increments. I pretty much use them for any non-armored crystal that takes a high dome crystal. I think they no longer make them but Cousins has still has some in stock but when I bought them they were around $40 for the set and now they are around $100. Still, at 40 cents a crystal it's still a good deal. For the large driving wheel, I remember I once assembled the keyless/motion works first and when I placed the large driving wheel it was interfering with the setting wheel on the dial side as the teeth were not fully meshing and it wouldn't fully seat. If that isn't the issue I got nothing and am looking forward to see how you solve it 🙂
    • Not sure, but just looking at it, it seems like the screw on the right may be a fake? The one on the left may not be a screw in the regular sense at all, rather a 2 position device, I think you need to point the slot towards either of the 2 dots and one will secure and one will open. Like I said this is just my best guess looking at the pictures.
    • Hi! I am in the process of restoring a rado captain cook mkII. I want to remove the rotor, but I am not sure how to and need some help. As you can hopefully see on the photo there are 2 screws. The left one has two positions, the right one looks like a regular screw. I have tried turning the right one, but it does not give even after using more force than I would expect. Anyone know the function of the left screw with the two positions and how to remove the rotor? Thanks!!
    • Welcome to the group Stirky. You can search for just about every subject in the craft here. Don't be afraid to ask if you can't find the answer that may have already been covered ( some ad nauseum LOL ). You don't have to buy Bergeon to get good quality. There are many decent mid-range tools available that will last you a lifetime. Cousins would be a good place to start . Cheers from across the pond ! Randy
×
×
  • Create New...