Jump to content

Cost of a Rolex etc


Recommended Posts

Part of the price is definitely the brand name, but Rolex does use higher quality materials, higher tolerances in making the watch and still hand finish a lot of the parts, and that does add a lot of cost to the watch.

There are 2 types of expensive watches.

1) High end brand, Rolex, Longines, Patek Philippe etc. These brands a lot of the price is the workmanship

2) Fashion brand watch. These are watches branded with a high end fashion name. The Fashion house may design the watch case but almost always buy in the movement. Usually the movement will be of reasonable quality, but its not uncommon to find a watch that sells for $500 to only have a movement that sells wholesale for $50 in it. This type of watch you are paying to wear the name not the quality of the watch.

 

But if you want to see what goes into making the real top end brands go watch the videos by Roger Smith on Youtube and you will understand why his watches are so expensive.

https://www.youtube.com/user/rwsmithwatches/videos

 

Link to comment
Share on other sites

I think part of what customers pay, goes to fund the traditional ongoing research that Rolex has historically been and is at the forefront of ever since the early days of its inception. 

There is also some polletical clout behind the brand, hard to find a wrist of sheikh something ben something else that is not advertising the brand.

A lot of folks including me, don,t really know more than what I read about the technical advancement at Rolex and the quality I feel holding a Rolex piece. 

I wonder what the market's worth of the brand itself is. Just today I see an advert showing a pic of Rolex, opened the page only to watch fashion clothing.

Whatever it is that Rolex has done and is doing,  it sure is working. Ticking the kid and the successful businessman in us. 

Other brand need introduction, Rolex introduces us.

Link to comment
Share on other sites

7 hours ago, stevew said:

Always wondered how much it actually costs to make a Rolex or any other Expensive Brand. I know you pay Thousands for such Watches, but in Reality i wonder how much was to be built?

Look at the cost of a new movement or a movement of comparable quality, cost is probably 30-50% of that.  Add a bit for dial, case and strap.  Add on the weight cost of precious metals if any.  The rest is fashion which is polite way of putting it.    A few hundred dollars, sans gold, is my guess, maybe a bit more as I'm just guessing at the case/band/dial cost.

 

Edited by measuretwice
Link to comment
Share on other sites

15 hours ago, stevew said:

Always wondered how much it actually costs to make a Rolex or any other Expensive Brand. I know you pay Thousands for such Watches, but in Reality i wonder how much was to be built?

I'd say it is maybe 10% - 20% of the selling price. than add in distribution, operational, development, advertising and all other costs and that gap quickly narrows.   

Link to comment
Share on other sites

6 minutes ago, swisschronic said:

an okay quality watch that was made with precision is always a pleasure to wear in my opinion. like a 1 dollar sapphire crystal is still a sapphire crystal right? be sure to spend the extra 35 cents for a cyclops that magnifies 2.5 times though.. :)

quality aside.  a fake is a fake no matter how well it is made.  

Link to comment
Share on other sites

Famous painters might paint a water colour in 4 hours. 50cents paper and paints. worth a fortune. Go figure.

I heard a story about Picasso who used to sign table cloths in restaurants after entertaining a large group and never got billed. He also said he could buy a house if he painted something....

Sure there is clever marketing in watches, but I don't think the inherent value is actually in the materials...perhaps its something else less tangible.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Showing state of hairspring on receipt, backplate & 'dished' wheel. 
    • I would harden and temper (to a light blue). It's so easy to do and only takes a couple of minutes. A search on ebay UK for "spring steel strip cs" finds plenty available in small quantites and thicknesses from 0.1mm up.  But the question is ( @nickelsilver) which "CS" number is best for watch parts ?  Also, from one of the ads : "CARBON SPRING STEEL. SIZE IS METRIC 15.00mm X 0.10mm X 304 MM  CS100 FINISH BRIGHT . HARDENED AND TEMPERD TO 480-530VPN" I've no idea about 480-530VPN. Does that mean it needs annealing before working?       Have you seen this video, he shows how to determine where the indents go ?  
    • Here is the insert ring for rectangular or elliptical movements: Note that the length is the side with the stem cut out on the spreadsheet (in the picture below this is 15.15: Here is the fake pdf file, again you need to convert to .zip after download to access the FreeCAD and 3mf files. Rectangular insert disc.pdf    
    • as you took the mainspring out what did it look like? It's amazing how much amplitude you can get if the mainspring actually has the proper shape. last week I was doing a 12 size Hamilton and was very much surprised with the beautiful back curvature the mainspring had. Then the watch had a really nice amplitude the group would be so proud it was 350 until I dropped the lift angle down to 38 that drop the amplitude quite a bit below 300. then with the beautiful back curve it still had really nice amplitude the next day. I really wish all my mainspring's look like this as the watch had beautiful amplitude the next day. So many of the aftermarket pocketwatch Springs I see now do not have anything resembling a back curve may be a slight curve and that's about all. They still work but they just don't work as nice as a properly made spring. then Omega as all sorts of nifty technical documentation unfortunately every single corner is watermarked with where it came from who downloaded it etc. very paranoid company. On the other hand I will snip out images like from the document on recycling a mainspring barrel. for instance here's the section on what your mainspring should look like. water damaged a lot of times means rust was there rust on this watch?
×
×
  • Create New...