Jump to content

Cost of a Rolex etc

stevew
 Share

Recommended Posts

Tmuir Distinguished Member

Tmuir

Posted
Posted

Part of the price is definitely the brand name, but Rolex does use higher quality materials, higher tolerances in making the watch and still hand finish a lot of the parts, and that does add a lot of cost to the watch.

There are 2 types of expensive watches.

1) High end brand, Rolex, Longines, Patek Philippe etc. These brands a lot of the price is the workmanship

2) Fashion brand watch. These are watches branded with a high end fashion name. The Fashion house may design the watch case but almost always buy in the movement. Usually the movement will be of reasonable quality, but its not uncommon to find a watch that sells for $500 to only have a movement that sells wholesale for $50 in it. This type of watch you are paying to wear the name not the quality of the watch.

 

But if you want to see what goes into making the real top end brands go watch the videos by Roger Smith on Youtube and you will understand why his watches are so expensive.

https://www.youtube.com/user/rwsmithwatches/videos

 

Link to comment
Share on other sites
Nucejoe Distinguished Member

Nucejoe

Posted
Posted

I think part of what customers pay, goes to fund the traditional ongoing research that Rolex has historically been and is at the forefront of ever since the early days of its inception. 

There is also some polletical clout behind the brand, hard to find a wrist of sheikh something ben something else that is not advertising the brand.

A lot of folks including me, don,t really know more than what I read about the technical advancement at Rolex and the quality I feel holding a Rolex piece. 

I wonder what the market's worth of the brand itself is. Just today I see an advert showing a pic of Rolex, opened the page only to watch fashion clothing.

Whatever it is that Rolex has done and is doing,  it sure is working. Ticking the kid and the successful businessman in us. 

Other brand need introduction, Rolex introduces us.

Link to comment
Share on other sites
measuretwice WRT Addict

measuretwice

Posted
Posted (edited)
7 hours ago, stevew said:

Always wondered how much it actually costs to make a Rolex or any other Expensive Brand. I know you pay Thousands for such Watches, but in Reality i wonder how much was to be built?

Look at the cost of a new movement or a movement of comparable quality, cost is probably 30-50% of that.  Add a bit for dial, case and strap.  Add on the weight cost of precious metals if any.  The rest is fashion which is polite way of putting it.    A few hundred dollars, sans gold, is my guess, maybe a bit more as I'm just guessing at the case/band/dial cost.

 

Edited by measuretwice
Link to comment
Share on other sites
JerseyMo Distinguished Member

JerseyMo

Posted
Posted
15 hours ago, stevew said:

Always wondered how much it actually costs to make a Rolex or any other Expensive Brand. I know you pay Thousands for such Watches, but in Reality i wonder how much was to be built?

I'd say it is maybe 10% - 20% of the selling price. than add in distribution, operational, development, advertising and all other costs and that gap quickly narrows.   

Link to comment
Share on other sites
JerseyMo Distinguished Member

JerseyMo

Posted
Posted
6 minutes ago, swisschronic said:

an okay quality watch that was made with precision is always a pleasure to wear in my opinion. like a 1 dollar sapphire crystal is still a sapphire crystal right? be sure to spend the extra 35 cents for a cyclops that magnifies 2.5 times though.. :)

quality aside.  a fake is a fake no matter how well it is made.  

Link to comment
Share on other sites
Hamish Member

Hamish

Posted
Posted

Famous painters might paint a water colour in 4 hours. 50cents paper and paints. worth a fortune. Go figure.

I heard a story about Picasso who used to sign table cloths in restaurants after entertaining a large group and never got billed. He also said he could buy a house if he painted something....

Sure there is clever marketing in watches, but I don't think the inherent value is actually in the materials...perhaps its something else less tangible.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • watchweasol
      Chronograph Pusher Rod for EB8371-67 Snapped and Stuck in Button. Can't Unscrew.

      By watchweasol · Posted

      Hi. Yes I get it , the slot in the end I’d to allow you to screw the button on whilst holding the pusher shaft. To remove the pusher tube you will need a tool such as the one shown by Richard. I think Ali Express the Chinese Amazon has replicas of the Horotec system for a lot less money, how effective they are not having had to use one. But as you said the way to go is complete removal and replacement, bodging it up will  lead to a repeat failure
    • JohnR725
      Notifications

      By JohnR725 · Posted

      It does look like it seems to be working again I'm getting emails.
    • JohnR725
      30T2 adjustment of timing washers

      By JohnR725 · Posted

      One of the things that I've been bothered with lately is timekeeping? For instance a 90-year-old pocket watch what so to timekeeping was it supposed to keep? They publish railroad timekeeping but I don't know how well normal non-railroad watches were supposed to keep time. The reason why the question comes up for me is I spend a lot of time at work adjusting watches to keep really really good time  because I have to please my boss where as when the watch was made I have to wonder what kind timekeeping would've been acceptable. After all they typically didn't have timing machines 100 years ago and they were timing and six positions certainly not for the non-railroad grade watch. On the other hand I do get paid by the hour so maybe I shouldn't be concerned of how much time I Spend trying to make everything keep chronometer timekeeping almost. Citing a Delta of 40 seconds for a 90-year-old watch is quite outstanding.
    • JohnR725
      Is this pallet fork over-locking?

      By JohnR725 · Posted

      That's an interesting question which I don't think I've seen explained anywhere. But I think the problem will go away just about instantaneously. In other words the  coating is really thin and it should go away almost immediately. So the problem should resolve itself extremely fast.  
    • VWatchie
      Is this pallet fork over-locking?

      By VWatchie · Posted

      I experienced that different types of shellac and their ages are affected differently by IPA. Sometimes the shellac dissolves in a few seconds and sometimes several minutes are required. Nowadays I never let shellac come into contact with IPA. It's a hotly debated topic here on WRT if you search. Like John, I don't think you need to worry about the weight of the shellac, but instead that it might start rubbing against something. When I learned how to adjust pallet stones, I tried documenting my experiences in this thread. Hopefully, it can help you. I personally don't believe in the idea of abrading the epilame before oiling so I don't think you need to think or worry about it. The only time I've heard anyone mention this is Alex on the YouTube channel Watch Repair Tutorials but actually no one else. I'm not saying it's "wrong" just that I don't think it's necessary or adds anything.
×
×
  • Create New...