Jump to content

Vintage Waltham parts / repair...


PaulnKC

Recommended Posts

WRT Members,

I have a 50's/60's era Waltham men's wristwatch that needs some help.

It's in amazing (as-new) condition, but while wearing the other day, it stopped - even though there should have been plenty of power in the mainspring.

Disassembling for investigation quickly revealed the trouble. The screw-head from the ratchet wheel screw had broken off and found its way in to the train wheels and locked everything up.

There appears to be no other damage - thankfully. But now I want to fix the movement. My preference would be to find a barrel arbor and screw - or better yet a complete going barrel assembly new with ratchet wheel screw.

I am search eBay now - but thought I'd check with you guys to see if anyone knew of a good source for such parts. I haven't found any yet.

NOTE: This movement is Swiss made, 7 jewels, marking on the base plate look like Unitas 1690/02

Any info/help is greatly appreciated.

Kind Regards,

-Paul

Link to comment
Share on other sites

If you're certain on the AS then it probably actually says 1690/92.

You could certainly pick up second-hand parts or a donor on ebay as you've intimated (e.g. https://www.ebay.com/itm/M22-Mens-Vintage-Waltham-AS-1690-92-movement/322426600684). For a lot of vintage watches getting hold of new parts however is difficult. Fortunately for your specific movement spares seem pretty readily available ... certainly if I look at my main supplier (UK based Cousins) they can provide lots of parts for the AS 1690. A new barrel arbor is £5.96 and screws (in a pack of three) are the same price. Tax and postage have to be figured in but that gives a ballpark for you. 

I note you're in the US so you could try a supplier closer to home - the resource page https://www.watchrepairtalk.com/links/watch-clock-repair-suppliers/united-states/ gives main ones for starters.

IMPORTANT: I note you mention that your movement is a 7 jewel variety but according to ranfft (http://www.ranfft.de/cgi-bin/bidfun-db.cgi?10&ranfft&0&2uswk&AS_1690) the 1690/92 should have 15 or 17 jewels. This isn't to say that a 7 jewel variety doesn't exist but given doubt on your original ID I thought it worth a mention. If in doubt post some pics here so folk can confirm.

Edited by WatchMaker
  • Like 1
Link to comment
Share on other sites

15 minutes ago, WatchMaker said:

If you're certain on the AS then it probably actually says 1690/92.

You could certainly pick up second-hand parts or a donor on ebay as you've intimated (e.g. https://www.ebay.com/itm/M22-Mens-Vintage-Waltham-AS-1690-92-movement/322426600684). For a lot of vintage watches getting hold of new parts however is difficult. Fortunately for your specific movement spares seem pretty readily available ... certainly if I look at my main supplier (UK based Cousins) they can provide lots of parts for the AS 1690. A new barrel arbor is £5.96 and screws (in a pack of three) are the same price. Tax and postage have to be figured in but that gives a ballpark for you. 

I note you're in the US so you could try a supplier closer to home - the resource page https://www.watchrepairtalk.com/links/watch-clock-repair-suppliers/united-states/ gives main ones for starters.

IMPORTANT: I note you mention that your movement is a 7 jewel variety but according to ranfft (http://www.ranfft.de/cgi-bin/bidfun-db.cgi?10&ranfft&0&2uswk&AS_1690) the 1690/92 should have 15 or 17 jewels. This isn't to say that a 7 jewel variety doesn't exist but given doubt on your original ID I thought it worth a mention. If in doubt post some pics here so folk can confirm.

WatchMaker - thanks SO much for taking the time to post and all of the info!

I immediately purchased the movement in your first link. That movement is it! If you look at the reverse side image - you will see that it says "seven 7 jewels" on the train wheel bridge. Maybe Waltham was cutting corners reducing the number of jewels on the parts they supplied to the movement.

 

I also found that Otto Frei has new (old stock?) A Shild 1790 movements which look like could be a new 17-jewel replacement. Do you happen to know if the 1790 is a likely drop-in replacement?

Again, many thanks!

Link to comment
Share on other sites

That's great. I didn't actually look super closely at the item I'd found but good to confirm that there are 7 jewel varieties as it was an anomaly I'd picked up between your movement and ranfft's information.

As to your question on whether a 1790 could drop in the main thing here will be what ligne size movement you have in your watch as AS produced a 10.5 ligne variety (approx 23.7mm) which is the 1690 and 1790 and a 11.5 ligne variety (approx 26mm) which is the 1692 and 1792.

If you're looking on Otto Frei at a 1790 then this is the smaller variety which means in turn you should check you currently have the smaller 1690.

Note that even if you did think that getting a 'new' 1790 is worth it then this unit should still have a service as it's likely been sitting on a shelf for ages i.e. oil will have deteriorated etc. With that in mind tackling your original movement with a service may be more satisfying!

Link to comment
Share on other sites

On 10/13/2019 at 4:37 AM, WatchMaker said:

That's great. I didn't actually look super closely at the item I'd found but good to confirm that there are 7 jewel varieties as it was an anomaly I'd picked up between your movement and ranfft's information.

As to your question on whether a 1790 could drop in the main thing here will be what ligne size movement you have in your watch as AS produced a 10.5 ligne variety (approx 23.7mm) which is the 1690 and 1790 and a 11.5 ligne variety (approx 26mm) which is the 1692 and 1792.

If you're looking on Otto Frei at a 1790 then this is the smaller variety which means in turn you should check you currently have the smaller 1690.

Note that even if you did think that getting a 'new' 1790 is worth it then this unit should still have a service as it's likely been sitting on a shelf for ages i.e. oil will have deteriorated etc. With that in mind tackling your original movement with a service may be more satisfying!

Watchmaker - Again - many thanks!

 

I think I should be well covered for parts to get this resolved.

 

There is a little more to the story - which you may enjoy. The watch who's ratchet wheel screw broke - is an almost identical copy of a watch that means a lot to me (sentimentally). I found it on eBay in NOS condition and purchased it so that I would have a spare part of everything for the watch.

 

The new one was so beautiful that I decided to wear it (some) - since there is no sentimental attachment to the new one. But it does remind me of the watch near and dear to me. Which, by the way is also in mostly excellent condition for a watch of it's age.

 

I should  post pictures of the two so that you can see them. The one I recently purchased is completely amazing. It came in the original box, with tags and the original strap. Not unworn, but almost. She's a beauty - and so is the one I have had for decades.

 

-Paul

  • Like 1
Link to comment
Share on other sites

Always nice to have the story behind a watch. Amazing you found one that's almost 'as new' and is original too (i.e. not messed with).

Good luck with the fixing and you will now have other spare parts to keep both watches on the road for a long time to come! :) 

Certainly feel free to show them off when you get a chance with some pics!

Link to comment
Share on other sites

8 hours ago, WatchMaker said:

Always nice to have the story behind a watch. Amazing you found one that's almost 'as new' and is original too (i.e. not messed with).

Good luck with the fixing and you will now have other spare parts to keep both watches on the road for a long time to come! :) 

Certainly feel free to show them off when you get a chance with some pics!

Thanks so much for everything.

I will definitely post a couple of pics after I get the "newer one" sorted.

-Paul

Link to comment
Share on other sites

On 10/15/2019 at 12:01 PM, PaulnKC said:

Thanks so much for everything.

I will definitely post a couple of pics after I get the "newer one" sorted.

-Paul

I ended up taking the barrel and ratchet-wheel screw from the "parts movement" that you found on eBay. I also purchased that NOS 1790, but the movements in these watches are the larger 1692. Still gives me a complete unused movement for parts.

Attaching some images - not sure how this is going to be formatted in the post (perhaps should have inserted using links).

But in the order that I think they will be in:

1) The newer movement fully serviced with the new barrel and ratchet-wheel screw.

2) A look at the dial before remounting in to the case.

3) Look from the rear - all mounted with the back off.

4) From the rear - with the back on.

5) The parts removed (barrel assembly complete with broken off screw head).

6) The two watches side by side.

7) My great uncle's watch from the rear with the original strap mounted (this strap came on the one I just acquired).

8) My great uncle's watch from the top in the correct original box (also came with the watch I recently acquired).

PA191909.jpg

PA191910.jpg

PA191913.jpg

PA191915.jpg

PA191916.jpg

PA191917.jpg

PA191918.jpg

PA191919.jpg

PA191920.jpg

  • Like 1
Link to comment
Share on other sites

  • 3 weeks later...


  • Similar Content

  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Does anyone knows what size case a need for a dial diameter 20.60mm?
    • Sounds like the story with my Rolex. Poor (expensive) job done by an official Rolex dealer with an "in-house" watchmaker, hence I learned watchrepair and did the servicing myself. Same story as I learned with the Omega 861, again poor job by an "in-house" watchmaker by an official Omega dealer. Once your watch goes through that back-door, you have no idea what is going to happening to it 🫣   Quite nice that they sent back the parts which had been replaced !
    • yes that's definitely not right at all. I have a picture one of my friends has a Omega coaxial there was having issues to lose asking me where he should send it. As that's a specialty watch I suggested the service center. When he got it back he sent me a picture so the replace the dial as you can see the hands the mainspring barrel and I think the price was really quite decent considering all the stuff they can replace. So I do know they do change the barrels but the other person I worked at the service center when I would ask questions and unfortunately I can't remember all the answers. I think a lot of the changing a parts is at the discretion of the watchmaker. Plus I don't know enough about the chronographs and whether that would be considered a vintage watch? I take some of the vintage watches may have been sent directly to Switzerland or another service center. Obviously with a watch like the one down below they probably have a infinite supply of parts is its relatively modern vintage stuff becomes more interesting even the watch companies don't have necessarily infinite supply of parts. But no matter what the watch shouldn't disintegrated six months that's definitely an issue.        
    • glad it worked out, those ESA movements are obsolete but new old stock is still out there, now that you know the make/model you could also do a cross reference to see if something more current would line up with the dial feet and hands...for future use if needed 👍
    • I wish they would have done so in this case. The whole story went like this: I sent my speedmaster to an omega service center about 10 years ago (at that point of time I haven't even started watchmaking). After the watch came back to me it had only about 6 months wristtime until january 2024 (not fair for this nice watch but the other pieces of my collection want wristtime too 🙂). So my conclusion is that the barrel was already faulty when it came back from service, can't imagine that amount of wear in 6 months wristtime. In january 2024 the performance on the wrist was quite bad, so I decided to have a look by myself. I have to admit that I didn't check the barrel close enough as I thought it must be ok, couldn't have issues after official omega service. That was a mistake, I will learn from that. Follow the golden rule: Nothing is certain except death and taxes.
×
×
  • Create New...