Jump to content

HELP! (Pryngeps) Can not find any info on this model and not much on the Maker

DukeOfParthenais
 Share

Recommended Posts

jdm Distinguished Member

jdm

Posted
Posted

Many Swiss brands were, and still are, nothing more that a print on the dial which was convenient for mass production. If you take picture the movn't you can get to know a little more about that, but don't expect anything out of the ordinary for aspect either.

Link to comment
Share on other sites
rogart63 Distinguished Member

rogart63

Posted
Posted

Seen a lot of pryngeps watches . Both chronograph and cheaper pin lever divers . There is also some quartz watches around . Don't know anything about name pryngeps but the check mikrolisk and see if you can find any info.  Think it could be a name just like any other brand. Here is a Chronopraph i found on a Swedish watch forum . 

Screenshot_20190508_152702.thumb.jpg.15e7a662bf1720f3cb052276e273c0e8.jpg

Link to comment
Share on other sites
Nucejoe Distinguished Member

Nucejoe

Posted
Posted
17 hours ago, DukeOfParthenais said:

I posted a picture of the movement, is it not visible. let me know im very new here

Right on Roger. Pesseux 320 is a true work horse. Used in countless brands.

If you got a good dial and stainless steel case, you will be passing this patremony to your son forty five years from this date.

Best

Link to comment
Share on other sites
jdm Distinguished Member

jdm

Posted
Posted
3 minutes ago, DukeOfParthenais said:

This watch was bought at a thrift shop many years ago and I can tell you it keeps amazing time and winds super smooth. I have not had to service it at all.

That winds and runs good is not an indication that servicing can be neglected. Since after various decades all the oil is gone, friction is all on metal of the pivots which wears out and cannot be restored. That leads to a very expensive service or repair at a later time. 

  • Like 1
Link to comment
Share on other sites
balaton Watch Enthusiast

balaton

Posted
Posted
3 hours ago, jdm said:

That winds and runs good is not an indication that servicing can be neglected. Since after various decades all the oil is gone, friction is all on metal of the pivots which wears out and cannot be restored. That leads to a very expensive service or repair at a later time. 

Couldn't agree more. All of my Peseux 3xx-driven watches run very accurately, but they have all been serviced and, OP, that's essential if yours is to be even just an occasional wearer. You may already know that yours has the "watchmakers' 4", shown as IIII, rather than IV, and usually thought to be in the interests of symmetry.

Regards.

Link to comment
Share on other sites
DukeOfParthenais Member

DukeOfParthenais

Posted
  • Author
Posted
17 hours ago, balaton said:

Couldn't agree more. All of my Peseux 3xx-driven watches run very accurately, but they have all been serviced and, OP, that's essential if yours is to be even just an occasional wearer. You may already know that yours has the "watchmakers' 4", shown as IIII, rather than IV, and usually thought to be in the interests of symmetry.

Regards.

Is hould really get that one serviced, sadly I dont wera it much as its quite dressy. Ill take your advice and get it checked

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      Without Our Forum

      By Neverenoughwatches · Posted

      Its 4 o'clock in the morning here in the Uk, i cant sleep, i dont sleep, not much ever really. My brain never shuts off to rest, I'm just a constant thinker, i have to be very tired to be able to sleep,  i guess eventually it will be my undoing and my health will suffer because of it I'm sure. But while I'm here i want to get as much out of life as i can, and give as much as i can, to help,maybe to make a difference to someone's life if that is within my capability,recent events have made that need even more clear to me. I'm not sure where I'm going with this or why i bring it up , or if its relevant to want i want to talk about its just in my head right now. What i do want to talk about is something thats been on my mind for ages. I like to be prepared,  I'm not fond of surprises because surprises take control away and i am a bit of a control freak at times. This forum, Our Forum if i can call it that, is here because of two reasons. The guy that created it and keeps it funded and the people that joined it.  Without either, it would not exist, and lets face it one day it won't ( I'm a realist and i talk about things others dont or who are afraid to in other words folk that dont particularly prepare for the inevitable). How many of us visit here regularly ?  How many among us almost depend on the forum as a way of socialising because they are stuck at home and how many of us has it become part of a daily routine to check in and see if they can offer advice or get help with something they are working on or just to have a chat and engage in some banter. The members here are in the thousands and thousands have disappeared over the years many had just a fleeting visit. But there are a good few of us that know each other quite well and visit regularly. I dont know about you but i wouldnt want to lose that communication with you all, in all honesty it has become an important part of that side of my life and helps to feed my passion for all things watches. Some of you may think differently and thats ok, some of may stop and think # what would i do " Without Our Forum " # 
    • Neverenoughwatches
      Gamblin Gamsol for cleaning?

      By Neverenoughwatches · Posted

      Naptha appears to be a general name and its content can be varied depending upon what it's specific use is. Lighter fluid as an example can be light or heavier also with other ingredients to help it burn. Try sesrching for benzine ( as opposed to benzene which is linked to causing health issues ) . There are other fluids such as ethanol that you could try and also methylated sprirts, mostly ethanol with a small percentage of methanol added. Experiment with any new chemical to see how quickly schellac dissolves in its presence. I have tried a few things but hexane is not one of them, i understand it does evaporate very quickly.  Be sure sure to check out any safety data on chemicals you try. Toxicity of fumes and flash point information, ultrasonic machines can heat up fluids even without a heater function. And of course always ask here for personal opinions when trying a new substance. 
    • GuyMontag
      What tools does ebay have to offer this week.

      By GuyMontag · Posted

      I have that set and really like it. I prefer that crystal holder over the one that came with my Bergeon claw tool and any time I use the claw I use this one instead of the Bergeon one, just an additional bonus with this tool.
    • GuyMontag
      Movement inserted from crytal side

      By GuyMontag · Posted

      Is the Roamer not a split stem? I'm confused on your how your case is put together. If it is a front loader where is it you are putting the case screws? I love me some Roamer, do you have any photos?
    • ManSkirtBrew
      1972 Bulova President "E" Sea King 11ACACB movement

      By ManSkirtBrew · Posted

      Oh nice. I have a similar wedge style stump for my staking tool, so I'll give that a shot. Thanks!
×
×
  • Create New...