Jump to content

Wolf Jahn Watchmakers Lathe


Recommended Posts

A lot of work went into restoring this Lathe. This include complete disassembly of the headstock. 6d51dc9ad805b283451124bcfa4522e7.jpg

 

Fixing the cracked pulley using JB Weld and fixing some major missing material in the headstock using JB Weld and then filing to original shape.

bfa13b590ce2cc7b83ef2fc1c0611ebd.jpgeef626936c47b4007d3e3b97b57818a8.jpg

Then reassembling the headstock and polishing the complete Lathe. A lot of work.

15fdbde9dee2222276ce9e5f397acea5.jpg

This is the before and after. Assembled with tight tolerance on the headstock so there is freedom but no movement for making small parts like balance staffs.

 

 

Sent from my iPhone using Tapatalk Pro

  • Like 1
  • Thanks 1
Link to comment
Share on other sites

21 hours ago, jdrichard said:

First picture is the wrong one, it’s another Lathe I cleaned..:)63fa3bda85f560b6e6ba7b6bfcb5e544.jpg


Sent from my iPhone using Tapatalk Pro

Fantastic job!

WARNING OT:

I remember back in 1987 when I bought my first computer. Among other things I used it as a typewriter. Remember Word Perfect? Anyway, the no 1 amazing thing with this way of writing was that a typing error could be edited indefinitely without a trace of the original error remaining. In this respect (and in this respect only) WRT sort of reminds me of the years before 1987 ;)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Hold the crown when in winding position, move the click away from the crown wheel, and then while holding the crown let it slowly unwind. I recollect that you must remove the automatic device bridge first, but maybe I'm wrong. You can first try without removing the automatic device bridge.
    • nevenbekriev- You nailed it with your description of me and my reaction when the clock started ticking again. I am a newbie.  I love the sound and idea of mechanical clocks but the idea of owning one and trying to keep them running has never appealed to me. My wife bought this one and an antique German wall clock.  When I looked into having someone repair them for me, the universal response was "it's really expensive to work on them, you should just replace the movement". So, I had nothing to lose, I started researching them and opened them up. The wife is happy because she hears the sound of the clocks again. But I have gone down the "accuracy" rabbit hole. In the vertical position, the balance wheel was not floating. It was sitting on the bottom of the frame. I adjusted the lower spring collet and got it floating. It easily passed the 270 degree 3 to 5 minute oscillation test. It took 8 minutes for the wheel to completely stop moving.  I put it the unit back in the movement and checked the safety pin. It does not touch the safety roller anywhere in +/-270 degrees rotation from neutral position. But the amplitude of the rotation with the spring fully wound is weak based on what you are saying. It rotates +/-90 degrees from the neutral position.  No, I did not take the movement completely apart.  That seemed way outside my skill set at the time. There is a reason I became an electrical engineer and not a mechanical engineer. I am much more comfortable with moving electrons than tiny moving metal parts. Will I do it in the long run? Anything can happen. I don't seem to be able to let it go.
    • Isn't that the same guy who told Zelenskyy to escalate the war with Russia/Putin when they already had a peace deal? 2 years later and we have half a million young Ukranian boys dead. He doesn't seem very clever...
    • Thanks guys.  quick question. For automatic movement, particularly this one. can I power down the main spring by pushing this rachet down?  i've gotten pretty used to SW210 and powering down a manual movement. But so far i've only been waiting for the auto movement to run out of juice before opening the case.     
×
×
  • Create New...