Jump to content

Finding replacement escape wheel for unmarked movement


Recommended Posts

Hi all. I'm absolutely brand new to the world of mechanical watches, but have always been fascinated by the way they functioned. So, I took my first step into them, getting myself a cheap, crappy ebay mechanical watch with a chinese movement. I knew that by all accounts this would be a rubbish movement and mechanism, however I wanted something that I could take a look at without risking any sort of investment, gauge my interest in the hobby etc. However, after receiving it, one of my friends let me know that he had a near identical cheap watch that was broken, and offered me to have a look at it as practice. I agreed, and have spent the last few days doing research and taking it apart, before putting it back together again. I've managed to learn quite a lot from it, however I've found that when putting it back together again, the pole of the escape wheel that keeps it in place either end seems to be too short, as though something had broken off. This means the wheel is sat basically loose and wont reach the crystals at either side to keep it in place while it spins. I see no way to fix this, so i intended to get a new wheel to replace it with, however I can't find the name of this type of movement anywhere. It is the kind used in this: ( https://www.amazon.co.uk/Jechin-Skeleton-Hand-Wind-Leather-Mechanical/dp/B00VPRZC50/ref=asc_df_B00VPRZC50/?tag=googshopuk-21&linkCode=df0&hvadid=290896788181&hvpos=1o3&hvnetw=g&hvrand=13027367026987882679&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9047006&hvtargid=aud-545868369748:pla-468442151749&psc=1 ) . If I really wanted to I think I could just order one of the other watches that I've found that use this movement for £5-6, however I was hoping I might be able to keep to my strict student budget and get just the escape wheel somewhere. Does anyone know where I'd be able to find something like that?

p.s. Apologies for the lack of knowledge on the subject, I know I'll come across a bit new to the whole thing, but trying to learn as I go

Link to comment
Share on other sites

19 minutes ago, Cont3mplation said:

I've found that when putting it back together again, the pole of the escape wheel that keeps it in place either end seems to be too short, This means the wheel is sat basically loose and wont reach the crystals at either side

That is called a pivot and it turns between holed jewels. There are many free resources to learn the correct name of parts.

Quote

If I really wanted to I think I could just order one of the other watches that I've found that use this movement for £5-6, however I was hoping I might be able to keep to my strict student budget and get just the escape wheel somewhere. Does anyone know where I'd be able to find something like that?

No spare parts are available for Chinese mov'ts. Sorry to be blunt but if you have an issue about £5-6 I recommend that you don't get into repairing watches.

Edited by jdm
  • Like 2
Link to comment
Share on other sites

Hello, Welcome to the forum and good luck with your foray into horology. 

Visit if you will,   www.eternaltools.com for a common vocabulary on names of parts in a typical movement made by ETA.  

Members just post picture of the movement for identification. 

Chineese movements are good choice for practicing.

Best wishes   

 

 

 

 

 

 

 

Link to comment
Share on other sites

  • 5 months later...

As I understand  it the dg2813  is based on the miyota  8200.. there is a chance  of parts interchangeability..but I wouldn't  bet on it.Best cheapest option  would be direct replacement of the movement  with the same type.If I were doing a favor  for a friend  with this type of watch,this is what I would  do. While  in no way intending to demean,given  your  level of experience  this would be the best way to insure reliable function at the lowest  cost,and a good way to keep  a friend. 

Link to comment
Share on other sites



  • Similar Content

  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • in general this shouldn't be any change. but in general questions like this it be nice to know the specifics of the watch in other words how was it performing before it was cased up and what is it doing now.
    • just as a reminder this watch is a Swatch group product. This will bring up a problem like spare parts and technical information. that I found some links to some information on when I talk about your watch and some of the technical and basically your watch is equivalent to 2834-2 for which I'm attaching the technical sheets. But equivalent does not mean exactly the same you want to do a search on the group for C07 as we discussed this watch before including the technical differences how it's supposed to be regulated and basically because it's watch group there is no parts availability. https://calibercorner.com/eta-caliber-c07-xxx/   https://www.chrono24.com/magazine/eta-movements-from-the-2824-2-to-the-powermatic-80-p_80840/ https://www.watchuseek.com/threads/h-10-movement-details.4636991/ eta CT_2834-2_FDE_481857_15.pdf
    • people be honest.... Swatch is evil for the watchmakers and repairers, BUT not everything in watches from Switzerland is from the Swatch-Group. As far as i know, Selitta got sacked by Swatch as a Movement-Assembler for them and they started to produce Movements in their own Name with slight Modifications. As far as i know, they sell Parts to the Market for their Movements. In most cases, if a ETA-Movement fails, it is a valid Option to replace it with a Selitta Movement, which i consider the Solution for this Mess with the Swatch-Group...... I have no Connection to anybody at Selitta, but being a Swiss-Guy, i still like to have Swiss-Made Watches, but not from the Swatch-Group.   ok ? regards, Ernst
    • Just one more greedy act by Swatch. They started a number of years ago here in the US..cutting off supplies to watchmakers that could build complications that many Swatch houses couldn't even touch. Old school masters who had gone through some of the most prestigious houses in the world. Otto Frei has some statements on their page about it. I tell all my customers to avoid new Swiss watches like the plague,..unless they just want an older one in their collection that still has some parts out on the market, or they have really deep pockets and don't mind waiting months and paying through the nose to get it back. Plenty of others to choose from..IE Seiko,..or other non-swiss brands Even a number of Chinese brands are catching up with the Swiss,..and I think that in time, their actions will be their downfall
    • Yes. If that's not what you are experiencing...start looking for something rubbing. A 1st guess is that one of the hands is rubbing against the hole in the center of the dial. Especially if you now have lower amplitude in face up/ face down positions.
×
×
  • Create New...