Jump to content

Started my 3é pocket watch repair...


Koen

Recommended Posts

So here the 3é one...

This one is not working, also a cylindric balance...

Oil and grease is dried out.

The pinion I can't get off... same as the 1é one... think for this part I need a pinion remover tool? Or is there a other way?

Need also to order a second hand, this one is missing.

IMG_9055.thumb.jpeg.b6b0235e810a76d748f75bce5ab11f1b.jpeg

 

IMG_9056.thumb.jpeg.8af99e4536cf8237796913cfa56ec0bc.jpeg

 

IMG_9057.thumb.jpeg.c2bb60abd463feb791807439be5521f3.jpeg

 

IMG_9058.thumb.jpeg.1c5df42b6bb6f9f62fc25e53c39268b9.jpeg

 

IMG_9062.thumb.jpeg.3fa3ec4ae63120da5db1b8f26416f9a0.jpeg

 

IMG_9061.thumb.jpeg.26f76611d4c7a3fb8db6b042b5a4d4ae.jpeg

 

IMG_9060.thumb.jpeg.532bcfa56645b59213c85b7bc3eb87a1.jpeg

 

IMG_9059.thumb.jpeg.237170c10614b727b2029b2a1b99473e.jpeg

Link to comment
Share on other sites

Dosn,t the canon pinion need to turn on center arbor in set position? So,

I see no need for pinion remover tool.  A droplet of penetrating oil on the center arbor and pinion, let soak for day or two, push on the center arbor from the dial side down, if didn,t loosen, you may at the last resort tap on the arbor gently to break it loose.

 

Link to comment
Share on other sites



×
×
  • Create New...