Jump to content

Made Another Balance Staff

jdrichard
 Share

Recommended Posts

jdrichard Distinguished Member

jdrichard

Posted
Posted

Cut another balance staff for an old British Pocket watch. Again used a piece of blued steel and cut 90% of the staff before breaking it off and flipping it around to finish the rolled table end and the lower pivot.31323cf47250603e868d329058c31523.jpg10bb56123418ec712defa3a6355a00dc.jpg9657b24a00da3c6e65bb444d2a2bbaf8.jpgc4dd55e98f96cc3f9f8e501334f7d332.jpgMeasuring the upper jewel hole with a pivot gauge.c90bf97bd859fa893c0cb11c3350e383.jpg547624baeb3a22a4e131ddb3e67dedc4.jpgbe261222e8f57e43eadf9ba7849ad673.jpg5d28b4ec69be49edf16c083d4284f95b.jpgd79a75831a39d38741a5d64709478f65.jpgf23c437ea8dc079130fa5751f5627314.jpgc78dbbe2fc01e4dd91a7a2374606a166.jpgb4214116ab4a4accb98df20e375a936d.jpg

 

 

Sent from my iPhone using Tapatalk Pro

  • Like 5
  • Thanks 1
Link to comment
Share on other sites
Koen Watch Enthusiast

Koen

Posted
Posted

Nice job man, don't thing I could do that!

Your movies helped me a lot with my first 2 pocket watches, lucky they still worked before I take them apart and were compleet.

The Hebdomas ( still not started with that one ) like you have is missing his bezel, but if I see how you make this small parts, it must be possible for someone to make a bezel to???

 

Keep posting movies and pictures.

  • Like 1
Link to comment
Share on other sites
jdrichard Distinguished Member

jdrichard

Posted
  • Author
Posted
Your confidence grows with each success.:Bravo: You should advertise in watch magazines. With your skills, you could make a lot of money. There are very few that have the skill you have. Loads of watch repairers, very few watchmakers.  Nice clear photos too.   

Thanks. Not sure how I would advertise? I actually love making balance staffs. The new DSZ-70 stereo microscope is great for examining my work and seeing any defects in the parts. Still cutting the part with x20 loupe however. Here is my messy deskf9e95bca19e3c47242cfe87c6406e713.jpg


Sent from my iPhone using Tapatalk Pro
Link to comment
Share on other sites
jdrichard Distinguished Member

jdrichard

Posted
  • Author
Posted
Nice job man, don't thing I could do that!
Your movies helped me a lot with my first 2 pocket watches, lucky they still worked before I take them apart and were compleet.
The Hebdomas ( still not started with that one ) like you have is missing his bezel, but if I see how you make this small parts, it must be possible for someone to make a bezel to???
 
Keep posting movies and pictures.

I think this could be done out of brass with a three/four jaw chuck. The threading would be very tricky...unless you do snap on.


Sent from my iPhone using Tapatalk Pro
Link to comment
Share on other sites
Tmuir Distinguished Member

Tmuir

Posted
Posted

Nicely done.

I've only made 1 balance staff so far.

I've got a German aircraft clock that has a broken endcap jewel that also had both ends of the pivots worn flat. I've rounded them again and once I've received the new reamers for my jeweling tool and fitted the new endstone I will find out if I will be making my second balance staff as it may now have too much endshake.

Link to comment
Share on other sites
jdrichard Distinguished Member

jdrichard

Posted
  • Author
Posted
Nicely done.
I've only made 1 balance staff so far.
I've got a German aircraft clock that has a broken endcap jewel that also had both ends of the pivots worn flat. I've rounded them again and once I've received the new reamers for my jeweling tool and fitted the new endstone I will find out if I will be making my second balance staff as it may now have too much endshake.

Good job. It’s all about the next adventure:)


Sent from my iPhone using Tapatalk Pro
Link to comment
Share on other sites
oldhippy Distinguished Member

oldhippy

Posted
Posted
1 hour ago, jdrichard said:


Lathes are easy to get on eBay. Then al you need is some tools and a steady hand.


Sent from my iPhone using Tapatalk Pro

Not that easy. You need to know a bit about them, other wise you could waste you're money and end up with a real turkey. 

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • ManSkirtBrew
      1972 Bulova President "E" Sea King 11ACACB movement

      By ManSkirtBrew · Posted

      Oh nice. I have a similar wedge style stump for my staking tool, so I'll give that a shot. Thanks!
    • joelcarvajal
      Gamblin Gamsol for cleaning?

      By joelcarvajal · Posted

      Thank you all for the replies!  Very informative! True enough, the Gamsol took some time to evaporate and does leave a residue. So not all naphtha are created equal!  Need to find alternatives then. i was able to try Hexane recommended by Alex and it seems great.  I wonder what the cons are?
    • GuyMontag
      1972 Bulova President "E" Sea King 11ACACB movement

      By GuyMontag · Posted

      Yeah, I saw that in the tech sheet but I don't see how it can be adequately cleaned with the friction pinion still in place. I've accidentally pulled the arbor right out of the wheel once when I used a presto tool to try and remove it. Mark shows how he does it with the Platax tool. Those are a little too pricey for me so I got one of these from Aliexpress and I just push down on the arbor with the end of my brass tweezers. That usually gets it most of the way out and then I just grab the wheel with one hand the and the friction pinion with the other and gently rotate them until it pops off. Probably not the best way but it's seemed to work for me so far.    
    • Zedster
      Movement inserted from crytal side

      By Zedster · Posted

      Thanks, Jon Sounds like a plan. Obviously I'll have the face on so do you think gripping with the holder will create any problems, but I will check in the morning to see how feasible it is but I assume it only needs to be lightly held. As for holding the movement instead of the holder won't be possible in this scenario as one hand will be puling on the stem while the other pushes the spring down. That was my initial concern is how the hell can I do this with only one pair of hands. All the other times I've had to remove the stem hasn't been a problem, apart from the force required to release the stem from the setting lever, but now I need to fit the face and hands its sent me into panic mode. If it had the screw type release things would be a lot simpler but that's life 😀   Another thing I will need to consider is once the dial and hands are fitted and the movement is sitting in the case I will need to turn it over to put the case screws in. I saw a vid on Wristwatch revival where he lightly fitted the crystal and bezel so he could turn it over, is this the only option or is there another method?      
    • nevenbekriev
      Main spring

      By nevenbekriev · Posted

      Hi Jon, do You think that relation spring torque - amplitude is linear? I would rather guess that the amplitude should be proportional to the square of the torque. I had once idea to check it, but still haven't.
×
×
  • Create New...