Jump to content

Made Another Balance Staff

jdrichard
 Share

Recommended Posts

jdrichard Distinguished Member

jdrichard

Posted
Posted

Cut another balance staff for an old British Pocket watch. Again used a piece of blued steel and cut 90% of the staff before breaking it off and flipping it around to finish the rolled table end and the lower pivot.31323cf47250603e868d329058c31523.jpg10bb56123418ec712defa3a6355a00dc.jpg9657b24a00da3c6e65bb444d2a2bbaf8.jpgc4dd55e98f96cc3f9f8e501334f7d332.jpgMeasuring the upper jewel hole with a pivot gauge.c90bf97bd859fa893c0cb11c3350e383.jpg547624baeb3a22a4e131ddb3e67dedc4.jpgbe261222e8f57e43eadf9ba7849ad673.jpg5d28b4ec69be49edf16c083d4284f95b.jpgd79a75831a39d38741a5d64709478f65.jpgf23c437ea8dc079130fa5751f5627314.jpgc78dbbe2fc01e4dd91a7a2374606a166.jpgb4214116ab4a4accb98df20e375a936d.jpg

 

 

Sent from my iPhone using Tapatalk Pro

  • Like 5
  • Thanks 1
Link to comment
Share on other sites
Koen Watch Enthusiast

Koen

Posted
Posted

Nice job man, don't thing I could do that!

Your movies helped me a lot with my first 2 pocket watches, lucky they still worked before I take them apart and were compleet.

The Hebdomas ( still not started with that one ) like you have is missing his bezel, but if I see how you make this small parts, it must be possible for someone to make a bezel to???

 

Keep posting movies and pictures.

  • Like 1
Link to comment
Share on other sites
jdrichard Distinguished Member

jdrichard

Posted
  • Author
Posted
Your confidence grows with each success.:Bravo: You should advertise in watch magazines. With your skills, you could make a lot of money. There are very few that have the skill you have. Loads of watch repairers, very few watchmakers.  Nice clear photos too.   

Thanks. Not sure how I would advertise? I actually love making balance staffs. The new DSZ-70 stereo microscope is great for examining my work and seeing any defects in the parts. Still cutting the part with x20 loupe however. Here is my messy deskf9e95bca19e3c47242cfe87c6406e713.jpg


Sent from my iPhone using Tapatalk Pro
Link to comment
Share on other sites
jdrichard Distinguished Member

jdrichard

Posted
  • Author
Posted
Nice job man, don't thing I could do that!
Your movies helped me a lot with my first 2 pocket watches, lucky they still worked before I take them apart and were compleet.
The Hebdomas ( still not started with that one ) like you have is missing his bezel, but if I see how you make this small parts, it must be possible for someone to make a bezel to???
 
Keep posting movies and pictures.

I think this could be done out of brass with a three/four jaw chuck. The threading would be very tricky...unless you do snap on.


Sent from my iPhone using Tapatalk Pro
Link to comment
Share on other sites
Tmuir Distinguished Member

Tmuir

Posted
Posted

Nicely done.

I've only made 1 balance staff so far.

I've got a German aircraft clock that has a broken endcap jewel that also had both ends of the pivots worn flat. I've rounded them again and once I've received the new reamers for my jeweling tool and fitted the new endstone I will find out if I will be making my second balance staff as it may now have too much endshake.

Link to comment
Share on other sites
jdrichard Distinguished Member

jdrichard

Posted
  • Author
Posted
Nicely done.
I've only made 1 balance staff so far.
I've got a German aircraft clock that has a broken endcap jewel that also had both ends of the pivots worn flat. I've rounded them again and once I've received the new reamers for my jeweling tool and fitted the new endstone I will find out if I will be making my second balance staff as it may now have too much endshake.

Good job. It’s all about the next adventure:)


Sent from my iPhone using Tapatalk Pro
Link to comment
Share on other sites
oldhippy Distinguished Member

oldhippy

Posted
Posted
1 hour ago, jdrichard said:


Lathes are easy to get on eBay. Then al you need is some tools and a steady hand.


Sent from my iPhone using Tapatalk Pro

Not that easy. You need to know a bit about them, other wise you could waste you're money and end up with a real turkey. 

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • RichardHarris123
      Introduction

      By RichardHarris123 · Posted

      Hello and welcome from Leeds. 
    • ManSkirtBrew
      1972 Bulova President "E" Sea King 11ACACB movement

      By ManSkirtBrew · Posted

      Unfortunately I'm not that lucky. I started on the train side and after I noticed the binding I pulled everything out except the driving wheel to rule everything else out. It still binds. I'm going to double check that the pinion is fully seated on the staff first, then if no joy I'll push the bridge jewel up a fraction of a mm. Fingers crossed!
    • Waggy
      Rado rotor removal

      By Waggy · Posted

      Happy to have helped, great way to start the day with a win! 🥳
    • doober
      Rado rotor removal

      By doober · Posted

      Thank you for the advise!! It worked. The setting screw was a lock/unlock to remove the rotor. 
    • GuyMontag
      1972 Bulova President "E" Sea King 11ACACB movement

      By GuyMontag · Posted

      I have that French tech sheet too, it is a little different than the English one (eg, it doesn't have the auto works diagram). BTW, it looks like you are looking up the case number in the 1979 ABC supplement. The 1974 ABC catalog does have the 3093 case. As you determined it takes the 1222-5 crystal.  When I serviced my President 'A' (which also takes that crystal), I was able to fit a 29.8 crystal from my DPA crystal assortment. Those are, in my opinion, a great deal. The assortment comes with 10 sizes each from 27.8mm to 32.4mm in 0.2 increments. I pretty much use them for any non-armored crystal that takes a high dome crystal. I think they no longer make them but Cousins has still has some in stock but when I bought them they were around $40 for the set and now they are around $100. Still, at 40 cents a crystal it's still a good deal. For the large driving wheel, I remember I once assembled the keyless/motion works first and when I placed the large driving wheel it was interfering with the setting wheel on the dial side as the teeth were not fully meshing and it wouldn't fully seat. If that isn't the issue I got nothing and am looking forward to see how you solve it 🙂
×
×
  • Create New...