Jump to content

Citizen cryston, one piece

Ishima

By Ishima
in Watch Repairs Help & Advice

 Share

Recommended Posts

Ishima Super WRT Addict

Ishima

Posted
Posted

Hi everyone I have been left with a citizen crystron.

It appears to be a one piece case indeed im certain theres no seem between the "case back" and case. Ive done many one piece watches however this being a bit rare and  a 600m water resistant watch (im thinking the glass will be near impossible to blow out withof air pressure) id really like to see if anyone had any experience or insights with these before I commit to trying to open it.

 

 

15684642020761996097186.jpg

15684644234051692643469.jpg

  • Like 1
Link to comment
Share on other sites
jdm Distinguished Member

jdm

Posted
Posted (edited)
1 hour ago, oldhippy said:

Will that ring come off? 

Being it a diver watch the rotating bezel is of course removable. Then use a Seiko S-14 or similar tool to remove the crystal.

Incidentally i couldn't find mine today, luckily Mrs jdm came to help! 

DSC_0082.JPG

Edited by jdm
  • Like 1
Link to comment
Share on other sites
jdm Distinguished Member

jdm

Posted
Posted (edited)
2 hours ago, Ishima said:

Thanks for the help everyone but I think by whats being suggested it would be wisest for me to admit defeat here.

Why defeat, is not that much a difficult problem. Not even the tool is expensive. Of course, if you have no good reason to take it apart or aren't comfortable servicing the mov't or doing a restoration, then leave it alone and so be it.

Edited by jdm
Link to comment
Share on other sites
Ishima Super WRT Addict

Ishima

Posted
  • Author
Posted (edited)

Almost zero experience with removing and refitting bezels, it's a blindspot for me and ive always considered it too hair-raising, i'd rather let my companies' central workshop deal with the odd bezel issue, don't even have tools specific for bezel work, neither do I have an s-14 tool or simular, Im not exactly sure how inexpensive they are, but at the end of the day I'm only trying to carry out a battery change. (in theory, it might need more than that given its age) In short I just don't feel like there's a lot of profit in it for the cost and risk, better to focus on the other jobs i have and send this one up.

Actually, I'm kind of tempted to fix that blindspot now. got plenty of scrap watches to practice on, what's the minimum set of tools you'd suggest?

Edited by Ishima
Link to comment
Share on other sites
jdm Distinguished Member

jdm

Posted
Posted
19 minutes ago, Ishima said:

Almost zero experience with removing and refitting bezels

There are probably more posting on diver's bezels than any other horology subject, anyway:

Removal: insert $2 Seiko type knife (any variety) and pry. Do not twist. 

Fitting: watch and bezel face down on bench, both hands on back, push down with all your weight if needed. If doesn't snap in (very unlikely on old popular pieces) use a snap-back or crystal press. 

S-14 or equivalent crystal pliers: check eBay. We aren't talking Bergeon robbery here.

Link to comment
Share on other sites
meanoldmanning Watch Enthusiast

meanoldmanning

Posted
Posted

If it’s anything like the newer citizen monocoque cases you pry off the rotating bezel and can see the crystal is pressed into a crystal holding ring which is then pressed into the case. Pry out the crystal and ring as a unit and you will see a lever to release the stem.


Sent from my iPad using Tapatalk

  • Thanks 1
Link to comment
Share on other sites
yankeedog Distinguished Member

yankeedog

Posted
Posted

There's  gotta be another  way. This is a battery  powered  watch. Why would  citizen  make  it such a PITA to do such a routine  chore as battery  replacement? I just can't  envision  having to remove a bezel and crystal  to replace  a battery. 

  • Like 1
Link to comment
Share on other sites
jdm Distinguished Member

jdm

Posted
Posted (edited)
8 hours ago, yankeedog said:

There's  gotta be another  way. This is a battery  powered  watch. Why would  citizen  make  it such a PITA to do such a routine  chore as battery  replacement? I just can't  envision  having to remove a bezel and crystal  to replace  a battery. 

There is no other way. Note well, it is a 600m waterproof watch, these are normally built with as single piece cases, quartz or mechanical.

Edited by jdm
  • Thanks 1
Link to comment
Share on other sites
jdm Distinguished Member

jdm

Posted
Posted
47 minutes ago, yankeedog said:

I guess.if you really need such a watch you must be willing to accept it's requirements.

Nobody needs a 600m diver's watch or for that matter not even a 200m one or a diver watch at all. Diving, even recreational, is done with wrist computers not watches, since some 25 years now. That being said I like to wear a diver's watch often, especially in water.

A single piece case construction is simply a sophistication and perceived robustness aspect, which is appealing to some buyers, like a tourbillon is to others, for a different style. 

  • Like 1
Link to comment
Share on other sites
  • 2 weeks later...
Ishima Super WRT Addict

Ishima

Posted
  • Author
Posted (edited)
On 9/17/2019 at 2:13 AM, meanoldmanning said:

If it’s anything like the newer citizen monocoque cases you pry off the rotating bezel and can see the crystal is pressed into a crystal holding ring which is then pressed into the case. Pry out the crystal and ring as a unit and you will see a lever to release the stem.


Sent from my iPad using Tapatalk

I just came back to report that this was indeed the case.

 

Our central workshop returned it to us undone , so I decided to remove the bezel and take a look, I was pretty overjoyed to see the notch and realised what I was looking at.

Im glad I shared your other suspicion early on regarding the stem lever, a lesser technician might have forced it and damaged it.

I now having it ticking and awaiting collection, thanks everyone.

 

Edited by Ishima
  • Like 1
Link to comment
Share on other sites
Ishima Super WRT Addict

Ishima

Posted
  • Author
Posted (edited)
On 9/21/2019 at 2:52 AM, yankeedog said:

There's  gotta be another  way. This is a battery  powered  watch. Why would  citizen  make  it such a PITA to do such a routine  chore as battery  replacement? I just can't  envision  having to remove a bezel and crystal  to replace  a battery. 

In the nicest possible way, you have no idea, my friend.:D

Theres so much out there designed to be difficult as possible, often on purpose.

Edited by Ishima
Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • ManSkirtBrew
      1972 Bulova President "E" Sea King 11ACACB movement

      By ManSkirtBrew · Posted

      Unfortunately I'm not that lucky. I started on the train side and after I noticed the binding I pulled everything out except the driving wheel to rule everything else out. It still binds. I'm going to double check that the pinion is fully seated on the staff first, then if no joy I'll push the bridge jewel up a fraction of a mm. Fingers crossed!
    • Waggy
      Rado rotor removal

      By Waggy · Posted

      Happy to have helped, great way to start the day with a win! 🥳
    • doober
      Rado rotor removal

      By doober · Posted

      Thank you for the advise!! It worked. The setting screw was a lock/unlock to remove the rotor. 
    • GuyMontag
      1972 Bulova President "E" Sea King 11ACACB movement

      By GuyMontag · Posted

      I have that French tech sheet too, it is a little different than the English one (eg, it doesn't have the auto works diagram). BTW, it looks like you are looking up the case number in the 1979 ABC supplement. The 1974 ABC catalog does have the 3093 case. As you determined it takes the 1222-5 crystal.  When I serviced my President 'A' (which also takes that crystal), I was able to fit a 29.8 crystal from my DPA crystal assortment. Those are, in my opinion, a great deal. The assortment comes with 10 sizes each from 27.8mm to 32.4mm in 0.2 increments. I pretty much use them for any non-armored crystal that takes a high dome crystal. I think they no longer make them but Cousins has still has some in stock but when I bought them they were around $40 for the set and now they are around $100. Still, at 40 cents a crystal it's still a good deal. For the large driving wheel, I remember I once assembled the keyless/motion works first and when I placed the large driving wheel it was interfering with the setting wheel on the dial side as the teeth were not fully meshing and it wouldn't fully seat. If that isn't the issue I got nothing and am looking forward to see how you solve it 🙂
    • Waggy
      Rado rotor removal

      By Waggy · Posted

      Not sure, but just looking at it, it seems like the screw on the right may be a fake? The one on the left may not be a screw in the regular sense at all, rather a 2 position device, I think you need to point the slot towards either of the 2 dots and one will secure and one will open. Like I said this is just my best guess looking at the pictures.
×
×
  • Create New...