Jump to content
bluerich

E Gluck 1213-21/Andre Rivalle

Recommended Posts

Does anyone have any information on an E Gluck 1213-21 17j movement? It is an Andre' Rivalle pocket watch. I have all the parts for cleaning oiling. It shouldn't be too hard to reassemble but any information on reassembly would be appreciated. These pictures identify the movement.

Thanks to all

WIN_20190912_09_42_14_Pro.jpg

WIN_20190912_09_36_51_Pro.jpg

Share this post


Link to post
Share on other sites

Thanks again Nucejoe. I finally got around to putting this movement back together, and now I'll take it apart again to clean and oil.

Now I also have to find out why my old Hampden lever set stopped running dial up after it was last wound. Runs dial down and seems to have picked up a "clanging" noise.

E Gluck - Ronda 3.jpg

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing

    No registered users viewing this page.

  • Topics

  • Posts

    • I got this little beauty  at a swap meet on Sunday.  I changed the battery and still nothing.  I know nothing about quartz. Is there a trick I kneed to know?  Is it worth taking down to be repaired?  Should I look for an ETA movement to put inside?  It does have the gold matching band in good condition.
    • So jdm if you want I can mail you the watch of your dreams.
    • When I was in the armoured corps they said “when I doubt Pit Out” aka go to sleep. Sent from my iPhone using Tapatalk Pro
    • Thanks for the reference. I may have that book. Sent from my iPhone using Tapatalk Pro
    • Thank you AndyHull and JerseyMo for responding with really helpful instructions!  You guys rock!  i have to get some rodic to help hold these two little mini-monsters in place. I was trying to use a small bit of sticky-tack but it didn't hold well enough.  I would get the screw into position but it would fall over when the screwdriver touched the screw.   For the 24 movement that still has the broken screw end in it, I will try to get that out after I get the lever and screw installed in my working 24.  And yes, I will install the crown/stem AFTER I have the lever and screw in place on the plate. Again, thanks for your help- i really appreciate it!!!  Will let you know when I get things back together.
×
×
  • Create New...