Jump to content

Timex: Indiglo WR30M: Snap Back Plate

slendotnet

By slendotnet
in Watch Repairs Help & Advice

 Share

Recommended Posts

slendotnet New Member

slendotnet

Posted
Posted

Hi,

I was replacing the battery on a family watch (Timex Indiglo: WR30M) that I was planning to pass to my son, when I somehow managed to lose the snap back battery cover for the back of the watch. I have chatted with local watch repair shops and searched online and I have been unable to find a source for a replacement part. I have also tried to be in touch with Timex directly, but considering the age I'm not expecting a quick reply. Any other sources for Timex parts?

Cheers

Link to comment
Share on other sites
WatchMaker Super WRT Addict

WatchMaker

Posted
Posted

... and failing that use a site like ebay and get a complete watch that you can take the part you need from. At the time of writing there are around 1,800 pre-owned Timex Indiglo watches listed so if you then ordered by price low-to-high and found something suitable going cheaply (e.g. "for spares or repairs" as you only want the case back) this could be a good option. 

Link to comment
Share on other sites
AndyHull Distinguished Member

AndyHull

Posted
Posted

I don't think I have anything suitable, but this might be what you need.
https://www.ebay.co.uk/itm/Timex-Indiglo-Watch-WR-30m-Working-Order/223654707480?hash=item3412dc0118:g:SQAAAOSwZc5dc7C5

.. or this ..

https://www.ebay.co.uk/itm/Vintage-Timex-Indiglo-Wr-30m-Mens-Wrist-Watch/352783225779?hash=item522384d3b3:g:CMgAAOSwBQ1ddT-~
 

The trouble is, WR30M refers to Water resistant to 30 meters, which seems to cover a lot of different models.

You would need to know the exact model number.

  • Thanks 1
Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • DDean
      Incabloc Lyre Spring & Low Earth Orbit

      By DDean · Posted

      Just a note for those who come searching for information on this topic in the future.  I did eventually find the Mark's video on how to replace these springs, as someone observed, he does in fact make the replacement look easy.  (It actually is relatively easy once you have the knack of it.) If you're enrolled in one of Mark's online courses, the demonstration of how to replace this spring is in the Bonus Videos section of his course site, and is called "C2B1 – Sea-Gull Style Shock Springs".
    • RichardHarris123
      Setting lever spring

      By RichardHarris123 · Posted

      If the metal was twice as thick, it wouldn't snap so easily.  The thickness is governed by the space available so you can't use thicker metal.  If you glued two pieces together, the likelihood of snapping would be reduced.  That's my theory anyway, could be wrong. 
    • JohnR725
      Pocket watch escape wh

      By JohnR725 · Posted

      there are various approaches to learning watch repair. A lot of people want to jump right in and every single watches something to be repaired restored. But other times like this it's disposable it's here for you to learn and when you're through learning you throw it away. yes you definitely should try this you have a learning movement you need to learn and the best way to learn is by doing something.
    • nevenbekriev
      Pocket watch escape wh

      By nevenbekriev · Posted

      Sorry, the friction will be so great that the wheel will barely turn, if the movement will start at all, the amplitude will be verry lo.
    • Bonefixer
      Pocket watch escape wh

      By Bonefixer · Posted

      If I can’t re-pivot the wheel, the logical thing to do is to descend the pivot hole.  Plan is to either stick a suitably sized hole jewel (from a barrel bridge or something) or fashion a blob of epoxy on the underside of the escape wheel cock so the wheel sits on its one pivot on the base plate and the staff with the broken off pivot (which I’ll polish as best as I can) becomes the upper pivot. As long as it doesn’t foul the 4th wheel it should work? I know it’s a bodge job, and if this were a rare movement, or belonged to someone else I would not do this. I’m just interested to see if I can get the thing to run. 
×
×
  • Create New...