Jump to content

Making Springs—Click, Lever, etc.

DavidMasters

By DavidMasters
in Watch Repairs Help & Advice

 Share

Recommended Posts

DavidMasters Watch Enthusiast

DavidMasters

Posted
Posted

Maybe I'm the only one that has problems on occasion when a click spring or lever spring takes flight never to be seen again. So, since I'm a hobbyist anyway I thought I may try making my own springs and was hoping some of you may have suggestions or other input. I guess the first question is what are springs made of? Can I buy the spring stock to bend my own springs?

Regards.

Link to comment
Share on other sites
ITProDad WRT Addict

ITProDad

Posted
Posted
Maybe I'm the only one that has problems on occasion when a click spring or lever spring takes flight never to be seen again. So, since I'm a hobbyist anyway I thought I may try making my own springs and was hoping some of you may have suggestions or other input. I guess the first question is what are springs made of? Can I buy the spring stock to bend my own springs?
Regards.

I like your spirit, young man!! But, spring steel is a different animal. If you bend it beyond its design it will weaken greatly. Could break. But it is possible. And they are usually made of “spray no steel”. You might have better luck looking for the exact part you need. It’s amazing what people have that you might need, including on this forum.

As for having springs, especially those little kif buggers, fly into another dimension right before your eyes; well you’re not a watch maker until you fill that alternate universe at least 11/16ths FULL of horological fiddly bits. Welcome to the club, my friend.

Just a suggestion the next time you approach a potential flier, use rodico to tack it down to plate before you touch it. This usually catches about 25% of potential losses.

Good luck. If you do make your own I think w would all love to see it! Please?


Sent from my iPad using Tapatalk
  • Like 1
Link to comment
Share on other sites
DavidMasters Watch Enthusiast

DavidMasters

Posted
  • Author
Posted
24 minutes ago, ITProDad said:


I like your spirit, young man!! But, spring steel is a different animal. If you bend it beyond its design it will weaken greatly. Could break. But it is possible. And they are usually made of “spray no steel”. You might have better luck looking for the exact part you need. It’s amazing what people have that you might need, including on this forum.

As for having springs, especially those little kif buggers, fly into another dimension right before your eyes; well you’re not a watch maker until you fill that alternate universe at least 11/16ths FULL of horological fiddly bits. Welcome to the club, my friend.

Just a suggestion the next time you approach a potential flier, use rodico to tack it down to plate before you touch it. This usually catches about 25% of potential losses.

Good luck. If you do make your own I think w would all love to see it! Please?


Sent from my iPad using Tapatalk

I’ve done a bit of research and I keep seeing guitar string as a spring material. Just a guess but it looks like most click type springs are about .3-.4mm. 

I have not looked at the OEM spring build process but I suspect the wire is heated then shaped otherwise such sharp bends looks to me like it would easily break the wire. 

I know buying what I need is the easy answer but I like challenges so unless I find it is a big extended process then I’ll give it a go just for the experience. 

Regards. 

  • Like 1
Link to comment
Share on other sites
ITProDad WRT Addict

ITProDad

Posted
Posted
I’ve done a bit of research and I keep seeing guitar string as a spring material. Just a guess but it looks like most click type springs are about .3-.4mm. 
I have not looked at the OEM spring build process but I suspect the wire is heated then shaped otherwise such sharp bends looks to me like it would easily break the wire. 
I know buying what I need is the easy answer but I like challenges so unless I find it is a big extended process then I’ll give it a go just for the experience. 
Regards. 

Guitar strings!!??! Brilliant! Tempering after shaping might keep its shape. Can’t wait to see your progress. Keep us posted?


Sent from my iPad using Tapatalk
Link to comment
Share on other sites
WatchMaker Super WRT Addict

WatchMaker

Posted
Posted

You may be interested in this previous thread: https://www.watchrepairtalk.com/topic/11979-spring-wire-for-a-click-spring-015mm

There has to be a market for these kind of springs! Anyone who works with watches and hasn't inadvertently launched a spring somewhere never to be found again at some time is fibbing! ^_^

After working on a movement where the date jumper spring was placed in just such a way that it could make a bid for freedom as soon as the retaining plate was gently loosened, I now always perform such an operation within a clear plastic bag!

 

  • Like 1
Link to comment
Share on other sites
DavidMasters Watch Enthusiast

DavidMasters

Posted
  • Author
Posted
6 hours ago, WatchMaker said:

You may be interested in this previous thread: https://www.watchrepairtalk.com/topic/11979-spring-wire-for-a-click-spring-015mm

There has to be a market for these kind of springs! Anyone who works with watches and hasn't inadvertently launched a spring somewhere never to be found again at some time is fibbing! ^_^

After working on a movement where the date jumper spring was placed in just such a way that it could make a bid for freedom as soon as the retaining plate was gently loosened, I now always perform such an operation within a clear plastic bag!

 

Thanks for the link. I thought I searched well enough before posting, but I didn't. Since I'm located in the USA I use Esslinger and others here for parts and tools. Here is a 0.17mm with they have. This seems like about the size most click type springs require. Cheap enough to experiment with. Now, on to the process of making springs from wire... 

https://www.esslinger.com/peerless-round-spring-steel-watch-and-clock-wire/

Regards.

Link to comment
Share on other sites
ITProDad WRT Addict

ITProDad

Posted
Posted
You may be interested in this previous thread: https://www.watchrepairtalk.com/topic/11979-spring-wire-for-a-click-spring-015mm
There has to be a market for these kind of springs! Anyone who works with watches and hasn't inadvertently launched a spring somewhere never to be found again at some time is fibbing! [emoji5]
After working on a movement where the date jumper spring was placed in just such a way that it could make a bid for freedom as soon as the retaining plate was gently loosened, I now always perform such an operation within a clear plastic bag!
 


I tried building a small tent of plastic sheeting over my mat with holes for my hands and head. But I could only work in it for about 4 minutes before blacking out. So I decided to practice more, use rodico and patiently wait for like items to come up on flea bay to replace those that obtained freedom through deleterious means. Never thought to cover only the movement and my hands. Learn something every day! :-)


Sent from my iPad using Tapatalk
  • Like 1
  • Haha 1
Link to comment
Share on other sites
Nucejoe Distinguished Member

Nucejoe

Posted
Posted
53 minutes ago, ITProDad said:

 


I tried building a small tent of plastic sheeting over my mat with holes for my hands and head. But I could only work in it for about 4 minutes before blacking out. So I decided to practice more, use rodico and patiently wait for like items to come up on flea bay to replace those that obtained freedom through deleterious means. Never thought to cover only the movement and my hands. Learn something every day! :-)


Sent from my iPad using Tapatalk

 

Hilarious :D    Good lungs though. 

Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • ManSkirtBrew
      1972 Bulova President "E" Sea King 11ACACB movement

      By ManSkirtBrew · Posted

      Unfortunately I'm not that lucky. I started on the train side and after I noticed the binding I pulled everything out except the driving wheel to rule everything else out. It still binds. I'm going to double check that the pinion is fully seated on the staff first, then if no joy I'll push the bridge jewel up a fraction of a mm. Fingers crossed!
    • Waggy
      Rado rotor removal

      By Waggy · Posted

      Happy to have helped, great way to start the day with a win! 🥳
    • doober
      Rado rotor removal

      By doober · Posted

      Thank you for the advise!! It worked. The setting screw was a lock/unlock to remove the rotor. 
    • GuyMontag
      1972 Bulova President "E" Sea King 11ACACB movement

      By GuyMontag · Posted

      I have that French tech sheet too, it is a little different than the English one (eg, it doesn't have the auto works diagram). BTW, it looks like you are looking up the case number in the 1979 ABC supplement. The 1974 ABC catalog does have the 3093 case. As you determined it takes the 1222-5 crystal.  When I serviced my President 'A' (which also takes that crystal), I was able to fit a 29.8 crystal from my DPA crystal assortment. Those are, in my opinion, a great deal. The assortment comes with 10 sizes each from 27.8mm to 32.4mm in 0.2 increments. I pretty much use them for any non-armored crystal that takes a high dome crystal. I think they no longer make them but Cousins has still has some in stock but when I bought them they were around $40 for the set and now they are around $100. Still, at 40 cents a crystal it's still a good deal. For the large driving wheel, I remember I once assembled the keyless/motion works first and when I placed the large driving wheel it was interfering with the setting wheel on the dial side as the teeth were not fully meshing and it wouldn't fully seat. If that isn't the issue I got nothing and am looking forward to see how you solve it 🙂
    • Waggy
      Rado rotor removal

      By Waggy · Posted

      Not sure, but just looking at it, it seems like the screw on the right may be a fake? The one on the left may not be a screw in the regular sense at all, rather a 2 position device, I think you need to point the slot towards either of the 2 dots and one will secure and one will open. Like I said this is just my best guess looking at the pictures.
×
×
  • Create New...