Jump to content

Watchmakers Bench Advice- Durston


JBerry

Recommended Posts

Hi all,

I've just moved to Copenhagen, Denmark, and rather than buy another generic desk and put extendable legs on it, I would like to invest in a nice sturdy bench with armrests, drawers etc.

So far the best option I can see for my budget (<€800), is the 5 draw Durston option on CousinsUK: https://www.cousinsuk.com/product/watchmakers-benches-durston

Does anyone have any experience with this bench? Or have any other recommendations for a nice cheap-ish bench?

Thanks in advance!

Link to comment
Share on other sites

Whatever size bench you have it will never be big enough. Your posture is something you need to sort out, as damage can be caused to your spine and neck and eyesight. Height is very important. A comfortable seat, one that can be adjusted is best.   Plenty of good draw space and you need hands on for tools. I see both benches have green as the covering and edges.  The covering doesn’t go right to the edge that is poor, parts can be trapped and on that colour wood hard to see. Many on here buy old benches and do them up. There are photos of member’s work places on here in a thread. You could do a search. Don’t rush into the first thing you see. Planning your bench for you to work at is very important, after all you are going to spend a lot of time there.   

  • Like 2
  • Thanks 2
Link to comment
Share on other sites

I often wonder why a glovebox, at least chin high and adjustable hight didn,t become standardized. The golve box should accomodate camrea, telescope, lighting etc. Disposable or remove to wash gloves.

Such set up ends the pain of loosing flying parts, saves your spine and neck, no dirt,oil, grease contamination from hands transfered to the piece.and above all fewer mosquitos land on the site to pay a visit in the midst of working a sensative task:lol:.

Furthure I don,t see why we can,t make one with fraction of the cost.

 

 

Link to comment
Share on other sites

1 hour ago, Nucejoe said:

I often wonder why a glovebox, at least chin high and adjustable hight didn,t become standardized. The golve box should accomodate camrea, telescope, lighting etc. Disposable or remove to wash gloves.

Such set up ends the pain of loosing flying parts, saves your spine and neck, no dirt,oil, grease contamination from hands transfered to the piece.and above all fewer mosquitos land on the site to pay a visit in the midst of working a sensative task:lol:.

Furthure I don,t see why we can,t make one with fraction of the cost.

 

 

Mosquitos! #1 thing about living in Ireland/what I will miss, is that we just don't have them!

Glovebox sounds cool but from my experience the full length gloves get very sweaty. Maybe a modified sandblasting cabinet could work too?

 

Link to comment
Share on other sites

3 hours ago, oldhippy said:

Whatever size bench you have it will never be big enough. Your posture is something you need to sort out, as damage can be caused to your spine and neck and eyesight. Height is very important. A comfortable seat, one that can be adjusted is best.   Plenty of good draw space and you need hands on for tools. I see both benches have green as the covering and edges.  The covering doesn’t go right to the edge that is poor, parts can be trapped and on that colour wood hard to see. Many on here buy old benches and do them up. There are photos of member’s work places on here in a thread. You could do a search. Don’t rush into the first thing you see. Planning your bench for you to work at is very important, after all you are going to spend a lot of time there.   

Thanks for the reply OH!

I'll be keeping an eye out for a used bench.

My brother is a cabinet maker, so eventually I will ask him to make my dream bench, but he is so busy now I would feel bad to ask him this favour.

Link to comment
Share on other sites

17 minutes ago, JBerry said:

Mosquitos! #1 thing about living in Ireland/what I will miss, is that we just don't have them!

Glovebox sounds cool but from my experience the full length gloves get very sweaty. Maybe a modified sandblasting cabinet could work too?

 

A glove box about a foot wide with gloves on each side, not suppose to accomodate the watchmaker himself just his hands, no sweat. 

I got a cheap LED telescope seeing the piece on a 50 inch screen is a treat. One disadvantage though is, mosquito looks as big as a parrot. Another disadvantage is I often find myself looking at the piece but details are to be seen on the screen.  

No cabinet neither just nylon compartment.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • So here is the new base, I made it so that the base will fit over and swallow the stump of the hand pusher tool (or at least my clone of the tool), I also reduced the OD of the bottom skirt a little as it looked a little large, here are a few pictures and the fake .pdf file which you need to convert to .zip once downloaded. The cut-out seen on the below image on the bottom of the base should swallow the OD (40 mm, +0.1 mm tolerance) of the stump and the height of the stump 9.5mm (measured to 9.1mm, but rounded to 9.5mm) - let me know if this works for your tool. Note, I think you may need to print supports for the new internal shelf created? Modular Movement Holder v2.pdf Modular Movement Holder v2.pdf
    • Hi Frank, you have dived headlong into the deep end. Hairspring work has to be the scariest thing a newbie has to tackle. Your hairspring appears to be bent and just putting it back into the regulator would not allow the balance to work properly. It might start oscillating but the performance would not be good. The proper thing to do is to unstud the hairspring, remove the hairspring from the balance, reinstall the hairspring on the stud carrier, reshape the endcurve and centre the collet to the balance jewel hole. This challenge would either make you or break you. Hope that you will be able to fix your watch. Welcome to the world of watchmaking. 
    • Have read of the Tech Sheet attached on the balance section page 12. It may be bent but until you reposition it back in the regulator pins you'll never know. Cheers CJ 4R35B_4R36A.pdf
    • Aloha All, My Seiko 4R35B movement stopped working today. Upon closer inspection, it looks like the balance spring came out of the regulator pin. This is my first time working on a balance. Any advice on how to get this spring repositioned (back to normal)? I'm pretty sure that while adjusting the beat error on this movement, I must have turned the stud (I didn't even know they turned), and the spring eventually fell out.  Will the spring go back to even spacing when it's back in the pin, or does it look bent? Thanks, Frank  
    • Good job, that band matches the watch perfectly.
×
×
  • Create New...