Jump to content

Looking for a camera


Recommended Posts

I am looking for a camera with a macro function to photograph my work.  I had a 18 or 20 megapixel Sony point and shoot that worked great for super close pics, but lost it in a fire.  Dont remember the model but it was a pocket sized camera I could zoom and focus on pallet stones with excellent definition.   It was less than $200 US.   Now I can’t find a camera that will do the job for less than $500  Any suggestions?

Link to comment
Share on other sites

Mark uses Panasonic micro four thirds  (as I do, but Olympus), and then switched to Canon full frame I think.

My personal finding is that stands and lighting are far more important than camera and lenses. For the latest and better I suggest  you browse dpreview.com

  • Like 1
Link to comment
Share on other sites

On 8/18/2019 at 1:47 PM, jdm said:

My personal finding is that stands and lighting are far more important than camera and lenses. For the latest and better I suggest  you browse dpreview.com

I agree with this, a good lighting makes wounders.
Usually when I post here I take a quick picture with my phone and the 21Mp is quite fair and the files are small enough to upload.
But a camera, correct lighting and a macro is what it takes to do some good movement por*.
This pictures is just a part of a picture since I can't upload the complete one (Camera is a Sony A7R II 42,4 Mp so the files  becomes large) but one gets what the difference in ligting do compared to my phone ones, this is just a part of the picture, it is just over 800k large! (or small).....
1_1.thumb.jpg.ea41c5d040852d4dd40c48d19587df6d.jpg

 

  • Like 4
Link to comment
Share on other sites

Well I was actually about to compare two cameras just to show how much improvement one can get with a good lighting but for some reason I just can't find the second camera a much cheaper SONY A37Y with macro lens too but for a fraction of the price. 
Guess I will not do that after all  :(

Link to comment
Share on other sites

  • 3 weeks later...

There is a lens addon that allows a normal lens to be used as a macro lens, you just need to know what is the thread size of the outer ring. This would probably not work on point and shoot cameras though. Its pretty cheap too, I think I paid around $25 for the one I have but I dont remember where I got it from.

IMG_20190923_224708.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • It's pronounced "bombay" like the city.  French for bomb is, 😄, bombe, pronounced the same as in English. Bombé, bombe.
    • That's a really good idea! I have a 3d printer, I think I'll design something that I can clip on to the edge of my desk to do the same. Thanks for the idea. 
    • I looked up bombè, domed in French.  It's pronunciation is bomb, does a bomb (explosive device) get It's name from bombè? I know we're going off subject but it's interesting. 
    • Okay, I checked with the fine folks at the McCaw Company, and they agree it's the correct crystal, and they have one in stock, so with that sorted time to get onto assembly. Starting by getting the spring into the barrel, which was a bit harrowing. It took me several tries to get it hooked onto my worn old winder arbor, but I did find a new use for the micrometer stand I just purchased. Carefully dabbed some Kluber P125 braking grease to the left of the divots around the barrel, and a little HP1300 on the floor of the barrel before popping it in--in case you haven't seen it, this is a great illustration I found somewhere on this site. You're not the boss of me, Bulova.   2172_Bulova 11AOAC 11AOACD 11AOACB.pdf Bulova_11 AOAC, D, B(1).pdf I got the train back in and it didn't seem as free as I'd like. Looks like the driving wheel with cannon pinion has zero end shake. That could explain the low amplitutde I started with. Now if you were me, would you push on the plate jewel or the bridge jewel? I've attached some extra pictures in case anyone sees something else I'm doing wrong here.
    • I have quite a few watch brands from all over the world. For some reason this Timex electric from 1979 is capturing my attention this week. I am not a particularly fond of battery operated watches or Timex, but this one is different for some reason. Post your watch in your collection that seems to draw you in more now than before...
×
×
  • Create New...