Jump to content
  • 0
pns6433

Can i use lubeta v106 for

Question

6 answers to this question

Recommended Posts

  • 0
Yes you can. It is for reverse wheels. 

thank you. CousinUK recommends using lubeta V105 for reversing wheels. And Lubeta V106 for bearings. But I only bought Lubeta V106. Using V106 for reversing wheels is still as good as V105? Excuse me if the spelling is not good. I use Google translate.


Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites
  • 0

I had a bottle of Lubeta V106 . Can't say i use it a lot. So when i open the bottle it was dry. Had closed as hard as i could . My experience say  9010 diluted in naptha is as good as Lubeta V106.  If you don't use it every day.  It's evoporates very fast  so gets thicker as times go by. 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing

    No registered users viewing this page.

  • Topics

  • Posts

    • Thank you for your message! In terms of pocket watches, what would you say is the most common mainspring size? Any rules of thumb you’re aware of? Sent from my iPhone using Tapatalk
    • Update I discovered the setting lever when crown is pulled all the way out does not engage because (see picture below) the post on my timing lever is gone so the lever was not secured at axis point which limited the range in which the lever could full extend. I ordered a new one should be here in a week. I will keep you updated, what I think happened is someone pushed the setting lever post to allow stem to insert or remove and they pushed it to hard and broke it.
    • There is a Jasco made Naphta sold in hw home improvement stores in the US. It's described as being the thinner for varnish and enamel. It also says that it cleans greasy, waxy, oily surfaces and machine parts. Would this be safe to use on watch parts including balance complete?
    • Hello everyone, My name is John but you can call me Jack. I am new the group here and have been a hobbyist repairer for the past 2 + years. I mainly stick with mechanical watches but from time to time I will tinker with old quartz Seiko watches which I love. A current project that I have been trying to get down is a Seiko 4336 8129. This watch has been fighting me from the start. Well the movement was dead due to a broken pivot on the motor. So I sourced a replacement movement. Next Crystal was cracked so I removed the broken glass but can't figure out how to take the top bezel ring off. I have some pics. This poor watch has had a rough life. I was trying to bring it back!! Thank you for reading my tale of woe!!  
    • I am looking for a camera with a macro function to photograph my work.  I had a 18 or 20 megapixel Sony point and shoot that worked great for super close pics, but lost it in a fire.  Dont remember the model but it was a pocket sized camera I could zoom and focus on pallet stones with excellent definition.   It was less than $200 US.   Now I can’t find a camera that will do the job for less than $500  Any suggestions?
×
×
  • Create New...