Jump to content

longines


gary17

Recommended Posts

Hey

Is there anywere i can go to find a longines pocket watch movement caliber.

I need to find the winding system for one.

Under the dial on the movement is the number 891499 or 891492

I have tried googling it and checked longines history pages but i've drawn a blank.

cheers

gary

IMG_20190813_224156.jpg

IMG_20190813_224132.jpg

Edited by gary17
to add pics
Link to comment
Share on other sites

That is a nice movement you have there, you could Always send a request to Longines and they will come back to you with the information you need.
If you send them your serialnumber on the movement and the serialnumber in the pocket Watch case you even get where it was sold and if the case is correct.
To recieve an certificate , a written paper COSTs but an e-mail answer is for free.
https://www.longines.com/certificate-of-authenticity

But
 if you are in a hurry I would take a guess that your movement is from around 1897-1898 and the caliber is probably an 18.5.

Edited by HSL
Link to comment
Share on other sites

5 hours ago, HSL said:

That is a nice movement you have there, you could Always send a request to Longines and they will come back to you with the information you need.
If you send them your serialnumber on the movement and the serialnumber in the pocket Watch case you even get where it was sold and if the case is correct.
To recieve an certificate , a written paper COSTs but an e-mail answer is for free.
https://www.longines.com/certificate-of-authenticity

But
 if you are in a hurry I would take a guess that your movement is from around 1897-1898 and the caliber is probably an 18.5.

Thanks 

Gary

Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I picked up a similar amount of these jewels some years ago in a watch and clock fair. Every now and then they come in handy. This week I've got a rubbed in bombe jewel in the balance cock that is cracked and needs replacing. Very handy to have a vintage assortment of these type of jewels!
    • Great diagram with the teeth and pinion count. Simple way to reduce the speed of the hour wheel by the 12:1 minute wheel. Genius and yet so simple. Always good to reinforce the principal by what you have done in your drawing. Keep doing that. I had a drawing on my wall for years showing me this which is very similar to the drawing you have done. Here's a formula to work out the beats per hour of a watch movement. The movement's BPH is dictated by the wheel teeth and pinion count and the hairspring being vibrated to the correct BPH by finding the pinning up point on the hairspring using a vibrating tool.  The reason in the formula there is X2 on the top line is because there are two pallet stones.
    • So I just wanted to say "thank you" again.  The angle is the key bit it seems and yes, it did basically just fall, or float, back into position when I got it lined up just right. I had meant to add that now that I see how it goes in, I totally see how it came out in the first place, and that whomever cloned the original movement didn't pay much attention to the fine details around the setting or how it interfaces with the balance cock or the "rings" on the regulator and/or stud carrier arms.
    • Well I’ve never seen the make before and cannot find any info, I haven’t got it just yet it’s been left to me among a 1970’s sea master and a mid size yeoman. But if anyone has any information on this one please feel free to enlighten me, many thanks 
×
×
  • Create New...