Jump to content

Getting started in Austin, TX

Sberry

By Sberry
in Introduce Yourself Here

 Share

Recommended Posts

Sberry New Member

Sberry

Posted
Posted

Hello -

I started getting interested in watches about 10 years ago when I interviewed a local watchmaker for a design project in school. I picked up a 1965 Seiko Weekdater around that time and have sent it away to be rebuilt once since then, wearing it daily, pleasantly ticking away on my wrist.

My wife's father passed recently and I was given his daily-worn 1976 Bulova Accutron in non-working condition. I finally got around to trying to sort it out and I was surprised to find that it needed more than a battery and also surprised when researching that the movement is so different and transitional. I would not really dream of tangling directly with the Accutron guts so I sent it off to someone with more direct knowledge and an appropriate parts-bin for it (works great, now).

Along the way, though, my own interest was piqued and I looked around for more simple watches that I could perhaps learn on, with the objective of being able to service them and know them. Soon I had several decades-old soviet watches in the mail from Kiev which I'm having fun wearing and restoring but would eventually like to service. 

Now I have an ST-36 on the way, a very-expensive set of small screwdrivers and tweezers, magnification, and I've sprung on this course bundle after surveying a few options. 

 I have a background of software, and lots of automotive projects large and small, but nothing so fussy and tiny as watch maintenance in my resume. Hoping that pure curiosity and interest can push me forward through any frustrations. Glad to join this community and please wish me luck!

steve

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • rjenkinsgb
      Chronograph Pusher Rod for EB8371-67 Snapped and Stuck in Button. Can't Unscrew.

      By rjenkinsgb · Posted

      Look carefully at the tube end?? It appears to me to have a fragment thread visible? Either that or a step just away from the end? I can imagine a chamfer, but a step seems odd - but I've never seen the tubes used on these.
    • Waggy
      Pocket watch escape wh

      By Waggy · Posted

      This is a very valid point and a subtlety that I was unaware of until fairly recently, learning all the time, the video below explains this point well:  
    • HectorLooi
      Blew it with a coil

      By HectorLooi · Posted

      You don't have to use his special tester. Any good multimeter would work.
    • nevenbekriev
      Pocket watch escape wh

      By nevenbekriev · Posted

      Yes, it looks like GT Revue 30. Doctor, You can not replace escape wheel by the dimensions You listed. One needs to know much more things like number of leaves of the pinion and it's diameter, the position in high of the table and the pinion, the hight between the pivots, the exact pivots diameter... And then, even if suitable wheel is found, one will need to know how to adjust the pallets position correctly. Restoring antique movements is something different than replacing parts. In older movements parts are not interchangeable, this means spare parts do not exist. Here the case is different, but still escapement adjustment will be needed if a wheel from a donor is found. So may be it will be easier to restore the donor for You...Restoring antique movements usually means making of the parts needed and this requires knowlage and working on lathes skill. In this case repivoting of the wheel is the natural solution, but there is a long way that one must walk untill getting ready for such work.
    • Waggy
      How to store one dip

      By Waggy · Posted

      I was looking at Essence of Renata, a chemical used a lot for cleaning hairsprings: "Specially prepared solution for degreasing watch and instrument components. Indispensable for degreasing hairsprings." Looking at the MSDS you can see this is just pure n-Heptane, so could be an option for those who don't want to use the chlorocarbons or hexane?     HF6013 - Horological Essence COSHH Safety Data Sheet Horological Essence_0.pdf
×
×
  • Create New...