taking apart a movement from case. Citizen vintage watch

[east3rn]

Hello.

I am about to work on a citizen vintage watch.

This watch has somewhat strange structure. The movement and dial is integrated to the caseback.

I need to remove the caseback to ind the movement. 

Any advice would be thankful!

 

[rogart63]

You need to remove that caseback. Should be screwed . And then as usual take the stem out . And the dial and movement shall come out to the dial side. 

[east3rn]

4 hours ago, rogart63 said:

You need to remove that caseback. Should be screwed . And then as usual take the stem out . And the dial and movement shall come out to the dial side. 

I see! I will try removing the caseback

I appreciate your help. 

[vinn3]

  the case back removeing should be done with a special watch tool.  good luck

[rogart63]

17 minutes ago, vinn3 said:

  the case back removeing should be done with a special watch tool.  good luck

Looks like a normal caseback that you can remove with a jaxa or similar tool. 

[oldhippy]

That movement will have a two piece stem. 

[jdm]

26 minutes ago, oldhippy said:

That movement will have a two piece stem. 

Why it should? As mentioned it has a regular screw type case back. 

[oldhippy]

14 minutes ago, jdm said:

Why it should? As mentioned it has a regular screw type case back. 

Looking again I think you are right. My first senior moment of the day.