Jump to content

Brad R

bradr

By bradr
in Introduce Yourself Here

 Share

Recommended Posts

bradr New Member

bradr

Posted
Posted

Hey I am new to this forum just wanted to introduce myself and see if anyone has any insight on how to match a dial, case to a specific movement.  I am looking at creating a watch using a ronda 5040.f movement and I am wanting to put together a custom dial to go along with it and finding a case that will work with both.  Any insight is much appreciated.  I have all the specs off of the ronda website but not sure what next step to take.

 

 

Thanks

Brad

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Razz
      Bench Light

      By Razz · Posted

      Very informative thread! After reading through, I ordered a lamp from Amazon. Under $49 US (£39) tax shipping and delivered in 6 hours, yep! This one has 5 intensity levels and 5 color settings from 3200 to 6500. I use a binocular microscope and have the gooseneck lamp in case I need directional light. Don't mind the clutter of watches, those are usually moved off the bench when working on a watch. This really lights up the area nicely. The ring of leds on the binoculars is fairly cool when compared to the new lamp. I like it because once set it returns back to the setting when turned off and back on again.
    • Nucejoe
      Vintage Seiko Technical Guides

      By Nucejoe · Posted

      So fsr as assembly, I don't think you would find 5646 different from 5606, just that GS is 36000 beater. No unknown chalange is there as long as the escapement reamins undameged. Rgda
    • MechanicMike
      Alternative cleaning machine chemicals

      By MechanicMike · Posted

      no, I have no alternatives and don't know of any. I've bought Mobius and that's all I have. 9010, 9104, 941, D5, 8000 and Moly-Kote.
    • AndyHull
      Revisiting an old hobby

      By AndyHull · Posted

      I've just had the wood stove door seal replaced. I was hoping not to need to do that again for a few years. In the name of science I can't say I'm not tempted. I mean how dangerous can it be? Says the man who encouraged his friend the plumber to use phosphoric acid to dislodge the solidified sodium hydroxide that had blocked the bath U bend. We did take that outside first though, and yes, adding concentrated phosphoric acid to sodium hydroxide crystals and drain sludge is as bad an idea as it sounds.. so we did it several times, laughing like delinquent school boys until the explosions of brown goop stopped. The operation was a success, but sadly the patient died (or rather, melted), and we had to replace the U bend anyway.  Children, please don't try this at home.
    • rehajm
      Revisiting an old hobby

      By rehajm · Posted

      I don't usually fancy the yellow crystals but it seems to work with that dial... ...and you can't set fire to it unless you share video. I speak for all of us...
×
×
  • Create New...