Jump to content

New to this hobby...but it interests me


BadDog

Recommended Posts

Hello! My name is Dan, and I've just recently started trying to figure this stuff out....I'll never know as much as I'd like, I'm sure..

 

At any rate...my grandfather died 45  years ago and left an old Paul Breguette mechanism (no case or band) ....tried winding it..and it started running

but it definitely needs work. I don't have the money necessary to pay a master watch maker to repair, case and band it, so I thought "eh, why not?"

and bought some tools...(Timegrapher, An Amscope binocular microscope and some tools...)...I suspect I'll destroy a number of mechanisms

before I actually get one to work again ...any tips or stories are greatly appreciated!

 

 

 

 

IMG_E9029.JPG

Link to comment
Share on other sites

Welcome Dan to the forum get a few good books and watch Marks videos on the forum site. As Old hippy states clean the dial with a soft pencil rubber (test in a corner first) then use a cotton bud dampened with distilled water of the like   be careful of the dial markings as they may be transfers and will be removed using water or spirit be careful and always test a little bit first.

Link to comment
Share on other sites

14 hours ago, vinn3 said:

    welcome Dan.   it is a good hobby.   have you read up on watch repair? vin

Yes, been trying to....I'm not attempting to be an expert, just something to do....and hopefully with *SOME* decent results...I'd really love to get my Grandfathers PB going in a case again...Thanks!

 

1 hour ago, watchweasol said:

Welcome Dan to the forum get a few good books and watch Marks videos on the forum site. As Old hippy states clean the dial with a soft pencil rubber (test in a corner first) then use a cotton bud dampened with distilled water of the like   be careful of the dial markings as they may be transfers and will be removed using water or spirit be careful and always test a little bit first.

 

Thanks, I'll give that a try! Thanks to Old Hippy too!

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Hi guys I think that old hippy is correct, it opens the gates for china to manufacture aftermarket spare parts. considering that they already do work on behalf of the Swiss I guess this decision gives the a little more legitimacy to tool up and I am sure they will take advantage of the situation either with or without the blessing of the Swiss watch industry  Having read about the protectionist machinations of the Swiss in the history of Europe they were the only ones to get fat at everybody else’s expense. I think the outcome could have been guessed at but ,  fair play to Cousins UK for standing up to them.  Now the question,  will everybody boycott Swiss watches and Swatch, no way they will still fill their coffers.  Me I stick with the Japanese once renowned for cheap shitty watches who came good through industrial effort and don’t for get the Russians that most dismiss as low grade crap. Wouldn’t buy a swatch product ever how about you all.? a
    • Hold the crown when in winding position, move the click away from the crown wheel, and then while holding the crown let it slowly unwind. I recollect that you must remove the automatic device bridge first, but maybe I'm wrong. You can first try without removing the automatic device bridge.
    • nevenbekriev- You nailed it with your description of me and my reaction when the clock started ticking again. I am a newbie.  I love the sound and idea of mechanical clocks but the idea of owning one and trying to keep them running has never appealed to me. My wife bought this one and an antique German wall clock.  When I looked into having someone repair them for me, the universal response was "it's really expensive to work on them, you should just replace the movement". So, I had nothing to lose, I started researching them and opened them up. The wife is happy because she hears the sound of the clocks again. But I have gone down the "accuracy" rabbit hole. In the vertical position, the balance wheel was not floating. It was sitting on the bottom of the frame. I adjusted the lower spring collet and got it floating. It easily passed the 270 degree 3 to 5 minute oscillation test. It took 8 minutes for the wheel to completely stop moving.  I put it the unit back in the movement and checked the safety pin. It does not touch the safety roller anywhere in +/-270 degrees rotation from neutral position. But the amplitude of the rotation with the spring fully wound is weak based on what you are saying. It rotates +/-90 degrees from the neutral position.  No, I did not take the movement completely apart.  That seemed way outside my skill set at the time. There is a reason I became an electrical engineer and not a mechanical engineer. I am much more comfortable with moving electrons than tiny moving metal parts. Will I do it in the long run? Anything can happen. I don't seem to be able to let it go.
    • Isn't that the same guy who told Zelenskyy to escalate the war with Russia/Putin when they already had a peace deal? 2 years later and we have half a million young Ukranian boys dead. He doesn't seem very clever...
×
×
  • Create New...