Jump to content

How can I remove the dial on this old 1mchz Mockba?


Recommended Posts

Have you checked mainplates side at 5hr and at 2hr for little screws holding the dial feet? If they don,t unscrew peacefully, put penetrating oil on them, let soak over night, sharpen you screwdriver to perfect fit.

If you can,t find the screws, give claiber post pix of MP sides( outer circumference)

Good luck

Edited by Nucejoe
At hr 5 and 10
  • Like 1
  • Thanks 1
Link to comment
Share on other sites

9 hours ago, Nucejoe said:

Have you checked mainplates side at 5hr and at 2hr for little screws holding the dial feet? If they don,t unscrew peacefully, put penetrating oil on them, let soak over night, sharpen you screwdriver to perfect fit.

If you can,t find the screws, give claiber post pix of MP sides( outer circumference) 

Good luck

You are correct! Upon careful inspection, there are two screws at 180 degree position on the mainplate. Thank you!

  • Haha 1
Link to comment
Share on other sites



×
×
  • Create New...