Jump to content

Anyone ever requested a Longines extract from Archives?


Recommended Posts

Has anyone ever used Longines free service to get an extract from their archives on their watch?

https://www.longines.com/certificate-of-authenticity

See the above link, if you just want the extract they will post it to you for free, obviously if you want a certificate of Authenticity you need to send them your watch and pay for that, but the extract is free.

 

I'm going to ask for the extract on my 30LS Longines.

  • Like 1
Link to comment
Share on other sites

I've never used the Longines archive extract but it has to be applauded for offering this as a free service, I have however used the Omega extract service which has a charge attached to it, that service was also good and included the Model number and Name year of manufacture and which retailer originally sold the watch and in which country.

I have also had good experiences with a company called Eberhard many years ago, I needed some parts for a old chronograph I  bought at a local auction  I needed a full set of hands a winding crown, and oval pushers, on the off chance they may still have these I wrote to them with the serial number and received a very nice letter back from them telling me that my watch had been manufactured in 1938 and was a two button 18ct rose gold chronograph and that they did have the parts and would be happy to supply them for 65 Swiss francs. Try doing that with any of the large manufactures, their response was a pleasant surprise.

I had the watch for many years but sadly I had it stolen about 5 years ago.

Link to comment
Share on other sites

I was about to like your post wls1971, until I read the last sentence when you said it was stolen, so instead I will say Ilike the story about how you got the parts for the watch, and to the person that stole it. :mad:

I lived in Glasgow Scotland from 1997 to 2000 and our flat got broken into and the thief reassembled my mountain bike that I had taken the wheels off to fit it in the cupboard and road off with my Low-Pro camera bag with about £8000 worth of cameras in it and my Waltham pocket watch that I loved and wore most days as I was still getting over a nasty watch allergy I got on my wrist from when I worked in outback Australia.

I bought myself a replacement Waltham at the Byzantine markets that used to be in Edinburgh to replace it, but it wasn't as nice as the one stolen. So I have an idea how gutted you must of been to get it stolen.

Link to comment
Share on other sites

Yes I really miss the watch, but I was far more gutted at the police response to the theft, the person who took the watch was caught through c.c.t.v evidence, I had to give a statement about the theft, the thief was apprehended and then given a official police caution which amounts to nothing its a get out of jail free card that the police chose to use in this country which allows them to record the crime as a solved crime and not have to do anything else, it is just used to make the crime figures look good, leaves the victim with nothing and the criminal free to carry on as before. all the thief has to do is admit the theft and agree not to break the law for a year.

I then decided to pursue a civil claim against the thief but the police would not release their name and address for me to do that, saying that they had a right to anonymity and it would be a breach of data protection, both these are just excuses by the police, they did not have the right to withhold the information from me, so I had to threaten the police with legal action, they then released the name and address.

The standard of justice in this country has gone to the dogs I would emigrate if I was 20 years younger than I am, I fear we will soon be on Donald trumps Sh@7H@le list.

End of rant !

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Thank you for the advise!! It worked. The setting screw was a lock/unlock to remove the rotor. 
    • I have that French tech sheet too, it is a little different than the English one (eg, it doesn't have the auto works diagram). BTW, it looks like you are looking up the case number in the 1979 ABC supplement. The 1974 ABC catalog does have the 3093 case. As you determined it takes the 1222-5 crystal.  When I serviced my President 'A' (which also takes that crystal), I was able to fit a 29.8 crystal from my DPA crystal assortment. Those are, in my opinion, a great deal. The assortment comes with 10 sizes each from 27.8mm to 32.4mm in 0.2 increments. I pretty much use them for any non-armored crystal that takes a high dome crystal. I think they no longer make them but Cousins has still has some in stock but when I bought them they were around $40 for the set and now they are around $100. Still, at 40 cents a crystal it's still a good deal. For the large driving wheel, I remember I once assembled the keyless/motion works first and when I placed the large driving wheel it was interfering with the setting wheel on the dial side as the teeth were not fully meshing and it wouldn't fully seat. If that isn't the issue I got nothing and am looking forward to see how you solve it 🙂
    • Not sure, but just looking at it, it seems like the screw on the right may be a fake? The one on the left may not be a screw in the regular sense at all, rather a 2 position device, I think you need to point the slot towards either of the 2 dots and one will secure and one will open. Like I said this is just my best guess looking at the pictures.
    • Hi! I am in the process of restoring a rado captain cook mkII. I want to remove the rotor, but I am not sure how to and need some help. As you can hopefully see on the photo there are 2 screws. The left one has two positions, the right one looks like a regular screw. I have tried turning the right one, but it does not give even after using more force than I would expect. Anyone know the function of the left screw with the two positions and how to remove the rotor? Thanks!!
    • Welcome to the group Stirky. You can search for just about every subject in the craft here. Don't be afraid to ask if you can't find the answer that may have already been covered ( some ad nauseum LOL ). You don't have to buy Bergeon to get good quality. There are many decent mid-range tools available that will last you a lifetime. Cousins would be a good place to start . Cheers from across the pond ! Randy
×
×
  • Create New...