Jump to content

Anyone ever requested a Longines extract from Archives?


Recommended Posts

Has anyone ever used Longines free service to get an extract from their archives on their watch?

https://www.longines.com/certificate-of-authenticity

See the above link, if you just want the extract they will post it to you for free, obviously if you want a certificate of Authenticity you need to send them your watch and pay for that, but the extract is free.

 

I'm going to ask for the extract on my 30LS Longines.

  • Like 1
Link to comment
Share on other sites

I've never used the Longines archive extract but it has to be applauded for offering this as a free service, I have however used the Omega extract service which has a charge attached to it, that service was also good and included the Model number and Name year of manufacture and which retailer originally sold the watch and in which country.

I have also had good experiences with a company called Eberhard many years ago, I needed some parts for a old chronograph I  bought at a local auction  I needed a full set of hands a winding crown, and oval pushers, on the off chance they may still have these I wrote to them with the serial number and received a very nice letter back from them telling me that my watch had been manufactured in 1938 and was a two button 18ct rose gold chronograph and that they did have the parts and would be happy to supply them for 65 Swiss francs. Try doing that with any of the large manufactures, their response was a pleasant surprise.

I had the watch for many years but sadly I had it stolen about 5 years ago.

Link to comment
Share on other sites

I was about to like your post wls1971, until I read the last sentence when you said it was stolen, so instead I will say Ilike the story about how you got the parts for the watch, and to the person that stole it. :mad:

I lived in Glasgow Scotland from 1997 to 2000 and our flat got broken into and the thief reassembled my mountain bike that I had taken the wheels off to fit it in the cupboard and road off with my Low-Pro camera bag with about £8000 worth of cameras in it and my Waltham pocket watch that I loved and wore most days as I was still getting over a nasty watch allergy I got on my wrist from when I worked in outback Australia.

I bought myself a replacement Waltham at the Byzantine markets that used to be in Edinburgh to replace it, but it wasn't as nice as the one stolen. So I have an idea how gutted you must of been to get it stolen.

Link to comment
Share on other sites

Yes I really miss the watch, but I was far more gutted at the police response to the theft, the person who took the watch was caught through c.c.t.v evidence, I had to give a statement about the theft, the thief was apprehended and then given a official police caution which amounts to nothing its a get out of jail free card that the police chose to use in this country which allows them to record the crime as a solved crime and not have to do anything else, it is just used to make the crime figures look good, leaves the victim with nothing and the criminal free to carry on as before. all the thief has to do is admit the theft and agree not to break the law for a year.

I then decided to pursue a civil claim against the thief but the police would not release their name and address for me to do that, saying that they had a right to anonymity and it would be a breach of data protection, both these are just excuses by the police, they did not have the right to withhold the information from me, so I had to threaten the police with legal action, they then released the name and address.

The standard of justice in this country has gone to the dogs I would emigrate if I was 20 years younger than I am, I fear we will soon be on Donald trumps Sh@7H@le list.

End of rant !

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I don't know if there is a timing machine for balance spring clocks. If not it is a case of trial and error. You should make a note of the position of the regulate and work from there.   
    • I'm sure you will get help on here soon.  Kkramme we like new members to make an introduction before posting. A little about your self such as where you life and what got you interested in Horology  
    • I'd be grateful for recommendations of good sources of advice on getting clocks with balance spring - as opposed to pendulum - escapements 'in beat'.....
    • Well I am in a bit of a quandary. I can't find the correct colour for the dial. I even wrote to Hettich a while back hoping they would give me the colour code for the dial. The reply that I received was "We don't make those anymore." I am thinking now to silver the dial and use a water transfer decal to put minute markers and the HETTICH logo (which is the very font that this forum uses) and the Made in Germany down the bottom. Not sure of the success rate of the water transfer method, but I have no other solution for the markers and logo. Handpainting is just not an option. In trying to get the top piece of the clock polished, it has progressively lost its sharp edges. My stupid hamfisted effort. I am thinking of purchasing a replacement piece of brass and drilling new holes in it for the corner posts. Why I attempted to repolish using wet & dry and not simply using a paint remover to remove the old lacquer from the brass, I don't know. You whistle and I'll point at the idiot. I also need to purchase some sheet spring steel as the two small ratchet springs that arrest the wheel that supports the weight after it is lifted by the electromagnet are worn. The two from the donor clock that I purchased are worse. I am hoping that I will be able to manufacture new springs without having to fiddle about with tempering etc to the steel. I have some ideas on that front. How many things until the clock is no longer the original? Like an axe. Heard a woodchopper on tv once saying that he had replaced the head on his axe twice and the handle three times, but it was the same axe that he began woodchopping with. 😉 I must post more often or read back through what I have previously written. Keep repeating myself. Sigh.
    • I use the exact OD and it fits in with a little force and a pleasing 'click' so it's snug and wont rotate within the holder, but that depends on how you have set up and calibrated your printer so you may need to play with the settings/dimensions a little to allow for any discrepancies in your printer calibration. PS I just finished (2 days ago) a new revision which automatically prints the movement OD on the bottom of the holder, I'll see if I can upload it here Here is rev 4 remember to change the .pdf to .FCStd so it will open in FreeCAD - also you may need to install the LiberationSansBold font and tell FreeCAD where it lives on your PC, or change the font to something you already have on your system. Para Movement Holder V4.pdf Examples below:
×
×
  • Create New...